Orbitsound SB60 airSOUND BASE User manual

SB60 airSOUND™ BASE /
SB60LX airSOUND™ BASE
HANDBOOK
version 2

WELCOME
Thank you for purchasing the Orbitsound SB60/SB60LX airSOUND
BASE. With proper use the airSOUND BASE delivers superb sound
fidelity, engaging spatial sound, and will provide you with a fantastic
listening experience for your TV, media and music.
Note, this handbook is relevant for SB60 and SB60LX products. In
diagrams, the SB60 is shown on front views.
PACKAGE CONTENTS
- airSOUND BASE
- Remote control
- Power supply + power cord
- User’s guide / warranty information
- Quick start guide
- Analogue audio connection cable
- Digital optical (TOSLINK) connection cable
- Colour fascias (silver and black) (SB60 model only)
- 8 round anti-vibration/protection pads
CONTENTS
WELCOME 2
The airSOUND BASE SB60 / SB60LX 3
airSOUND BASE Controls & Indicators
GETING STARTED 4
Remote control
Sound Source / Setting memory
FRONT GRILLE (SB60 ONLY)
GETTING THE BEST SOUND 7
CLEANING AND CARE 7
TROUBLESHOOTING 8

The airSOUND BASE SB60
/ SB60LX
The Orbitsound airSOUND BASE SB60 / SB60LX is a single box TV
sound system that delivers full range spatial sound for your living room.
It is designed to work with your TV to give amazing, true and clear
sound.
The airSOUND BASE has 5 speakers. 2 front speakers that produce
high definition mid and high frequencies, 2 side speakers that generate
the spatial experience, and an integrated down-firing subwoofer that
delivers strong bass. All these speakers work together for a great sonic
experience.
airSOUND BASE Controls & Indicators
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
Toprevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
(1) - Status LED Red: Standby mode
Blue: On
Blue (flashing): Mute
O: Power o
(2) - Main power switch
(3) - Volume control (turn): Turn clockwise to increase volume
(loudness), anticlockwise to decrease
volume. The blue status LED (1) will flash
when the volume changes.
(3) - Volume (short press): Press to cycle through the inputs.
(3) - Volume (long press): Enter standby mode. Press the volume
control to resume from standby mode.

GETING STARTED
1. TV SETUP
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
Toprevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
Position the airSOUND BASE under your TV. If your TV base is too large
(bigger than 59cm wide), then the airSOUND BASE should be placed on
a shelf below or above your TV. The airSOUND BASE can also be used
without a TV as a sound system.
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
Toprevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
The airSOUND BASE is packaged with 8 anti-vibration/protection pads.
If you experience vibration noise from your TV set during use, then use
the pads as shown to help prevent this.
Hint: You can use the pads under the airSOUND BASE if necessary to
help reduce vibrations transmitted to other objects around your TV.
WARNING: Make sure that your TV is safe. Do not use the anti-vibration
mats if the TV becomes unstable.

2. CONNECTING UP
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
Toprevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
The best way of connecting the airSOUND BASE to your TV is with the
included optical (TOSLINK) cable. Remove the protective covers (1).
Use the cable to connect the Digitial optical output of your TV to the
airSOUND BASE optical input (2).
Note: Make sure the connectors CLICK into place.
Note: Turn down or turn o your TV speakers in the TV menus.
Note: Check that the sound setting is set to ‘PCM’ / Stereo, and audio
output is set to ‘optical’ on the TV menus.
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
Toprevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
Connect the power supply and mains cord to the airSOUND BASE (1).
Switch on the power (2). You should now hear your TV sound playing
through your airSOUND BASE.

If your TV does not have optical:
Use the included analogue cable to connect the audio output from your
TV to the airSOUND BASE AUX 1 or AUX 2 inputs. You will need to
change the source of the airSOUND BASE to AUX to hear this input.
Note: Some TVs may only have a 3.5mm jack (headphones) output,
you can also use this output. If your TV has no audio output, you can
connect the optical cable to your set top box.
Remote control
Source Changes the input source
Volume + / - Controls volume
Power Enter standby / resume
Treble + / - Changes the sound of the airSOUND BASE + / - 5 steps.
Bass + / - Changes the volume of the subwoofer + / - 5 steps.
Mute Enables mute / resumes playback
Note: When a remote control button is pressed and the airSOUND BASE
responds, the status LED will flash.
Sound Source / Setting memory
When the power is connected, the sound and source of the airSOUND
BASE is reset. The inputs are:
1. Optical (default)
2. AUX 1 (RCA inputs)
3. AUX 2 (jack input)
Note, the volume, bass, treble and source settings are remembered
when entering or resuming from standby.
FRONT GRILLE (SB60 ONLY)
The SB60 airSOUND BASE front grille is easily changed. It is held in
place by magnetic attachments. To replace the front grille, gently pull
the side of the grille away from the unit, and it will detach. Oer the new
grille, and it will snap into place.
BASS TREB
BASS TREB
The highlighted buttons perform
various functions on the SB60/
SB60LX

GETTING THE BEST SOUND
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
12
2 3
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M12
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
WIRELESS
1
3
2
2
11
4
Optical
Bluetooth
Aux
Optical
Bluetooth
Aux
1 2
3
Optical
Bluetooth
Aux
1
OR
3
TV OPTICAL
AUDIO OUT
1
2
3
1
2
122
1
3
2
3
4
The airSOUND BASE is easy to set up and enjoy, but even better sound
may be achieved by following these easy steps:
Spatial Sound:
The spatial sound field is produced by the speakers in the sides of the
airSOUND BASE (2). These special signals interact with the main signal
(1) to produce spatial sound in your listening environment. Make sure
that the side grilles are free from obstacles.
The Subwoofer:
The integrated subwoofer (3) is down firing and produces powerful
bass. Make sure that loose objects are not able to rattle on the surface
near the airSOUND BASE. You can turn the Bass down with the remote
control to reduce the bass level.
To get the best bass performance, ensure that the bass port (4) is free
from obstruction, and it is at least 5cm away from the nearest wall.
CLEANING AND CARE
Use a soft, clean cloth moistened with plain, luke-warm water to
clean the exterior of the unit. Glass cleaner is a good way to remove
finger marks, but use it sparingly, and avoid contact with the actual
loudspeaker driver units.
IMPORTANT: Never use solvents such as benzene or other strong
chemical cleaners since these could damage the unit’s finish. It is VERY
important that no liquid reaches the inside of the unit.

TROUBLESHOOTING
No sound:
Check power connections and that there is a
continuous blue light on control panel.
Check that the TV or other sound source
is playing and that it is connected properly
to the airSOUND BASE. If unsure that your
media device is playing, unplug, and test with
headphones.
Press the ‘source’ button on the remote
control to change the sound source. The
status LED (2) will flash when the source
changes.
Adjust the volume of the soundbar until sound
is heard.
The sound is out of sync
with the TV
Make sure all video sources are connected
to the TV and that the airSOUND BASE is
connected to the TV optical output or RCA
(AUX) output. This connection method should
re-align the sound. If it is still out of sync, look
for a sound/time alignment menu in the TV
menus.
Remote does not work
Check that plastic strip in remote (battery) has
been removed.
If the remote has had a lot of use, replace the
battery.
Check there are no obstructions between the
remote and the front of the airSOUND BASE.
Sound is noisy / ‘hissy’
Turn down the volume of the airSOUND BASE
unit and turn up the output volume of music
source to compensate.
Use the digital optical (TOSLINK) input if
possible to reduce noise.
Digital optical issues:
‘Clicking’ or no sound
Ensure both ends of the optical cable have
had the protective plastic tip removed.
Ensure both ends of the cable have been
inserted fully; a distinct ‘click’ will be felt when
the cable is properly seated.
Check the output format of the optical signal
from the playing device. Choose ‘normal’ or
‘PCM’ format. Refer to the TV manufacturer’s
handbook for more information. You can
also contact Orbitsound for advice, see
contact help line in this handbook and on the
packaging.
Battery replacement
(remote control)
Replace remote battery with anode up (+) from
back-side. Use CR2025 or CR2032 battery.
Note: CR2032 is a larger battery that will last
longer.

SPECIFICATIONS
Frequency range +/- 3 dB [Hz] 38 – 16KHz
Control; response (remote control) LF: +,-8dB subwoofer volume
HF: 10KHz +/- 8dB EQ
Maximum SPL [dB] 95dBA
Amp. power 200W total
Crossover frequencies [Hz] 220Hz
Front main drivers 2x2” Orbitsound mk2
Spatial drivers 2x2” Orbitsound mk2
Sub-Bass driver 1 x 5”
Enclosure types Front – asymmetric sealed
Sides – sealed chambers
Subwoofer – hybrid mode down firing.
Connection input(s) Stereo Line level -10dBu
3.5mm jack and RCA.
TOSLINK optical (Stereo).
Recommended placement Under television
Dimensions (H x W x D) [mm] 60 x 34 x 8cm (soundbar)
Cabinet finish SB60 High gloss engineered wood
SB60LX PVC coated engineered wood
Weight (in packaging) 9Kg
Power consumption Standby / Idle 0.4W / 3W
Voltage / Power 22V DC / 110-240v AC
Remote Control IR lead code 6122/01FE
‘Orbitsound’ and ‘airSOUND’ are registered trade marks of Orbitsound Ltd.

FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation. Any changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD VOID AND CHANGE
ANTENNA WHICH THE MANUFACTURER PROVIDES. IT IS THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance
with FCC’s RF exposure guidelines, this equipment should
be installed and operated with a minimum distance of 20cm
between radiator and your body. This transmitter must not be
co-located or operating in conjunction with any other antenna
or transmitter.
WARNINGS
- To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on apparatus
- Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily
operable
- Only use AC/DC adaptor specified rating: Input 100-240Vac,
50-60HZ; Output 22Vdc, 2.5A. This product is intended to be
used only with the power supply provided
- The direct plug-in adaptor is used as disconnect device, the
disconnect device shall remain readily operable (for speaker)
Important Safety
Information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings – on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.
9. No naked flame sources, such as lighted candles, should be
placed on the apparatus.
10. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong is
provided for your safety. If the provided plug does not fit in your
outlet, consult an electrician for replacement of the obsolete
outlet.
11. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
12. Only use attachments/accessories specified by Orbitsound.
13. Do not let objects or liquids enter the product – as they may
touch dangerous voltage points or short-out parts that could
result in a fire or electric shock.
14. Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged.
15. This product may contain magnetic parts. Metallic materials
may be attracted to the product. Do not place credit cards
or other magnetic storage media near the product, because
information stored on them may be erased.
16. Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
17. Unplug this apparatus during lightning storms or when
unused for long periods of time to prevent damage to this
product.
18. To prevent risk of fire or electric shock, avoid overloading
wall outlets, extension cords, or integral convenience
receptacles.
19. The mains plug is used to disconnect the device and it shall
remain readily operable. To completely disconnect the power
input, the mains plug of the apparatus shall be disconnected
from the mains.
20. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus; the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.

ORBITSOUND LTD.
[phone]
www.orbitsound.com/support
[email protected]