Orei HD12-EX132-K User manual

Thank you for purchasing the OREI HDMI Extender. For optimum
performance and safety please carefully read the instructions and
keep them for future reference.
· IMPORTANT SAFETY NOTICE
1. Do not mix up the transmitter unit (TX) and the receiver unit (RX),
IR blaster extension cable and IR receiver extension cables before
installation.
2. Do not unplug while the device is in use.
3. Power the device using the included 5V DC power supply adapter
only. If using other adapters please make sure the specs are identical.
4. Static electricity will damage this item. Please follow ESD protection
guidelines while installing this device.
The OREI HD12-EX132-K HDMI extender kit includes 1 transmitter
and 2 receives which allows you transmit 1080P HDMI signal to 2
displays up to 132 ft via Cat/6A/7 LAN cable. This kit supports IR
passback with wide IR frequency between 20~60KHz.
1. Distribute 1 HDMI source to 2 HD displays over Lan Cables
2. Supports 1080P signal up to 132 ft over LAN
3. Supports CAT6/6A/7 LAN Cables
4. Plug & play easy set-up without software installation
5. Support 20-60KHz IR passback
6. Support one HDMI loop-out and EDID management
DC5V/1A x2pcs
· FUNCTION

1080P Uncompressed 1X2 HDMI Splitter
Over 40meter Cat6 with IR
HD12-EX132-K User manual
OREI is a registered trademark of OREI, LLC The pictures in the user
manual are for reference only and there may be a slight difference in
the appearance of the actual product. We reser ve the right to make
changes without further notice to a product or system described
herein to improve its reliability and functionality.