Origin Acoustics REBR68 User manual

Installation Manual
REBR68
Reusable Bracket
REBR68

Table of Contents
Introduction 1
What’s Included 2
Tools & Items 2
About the Reusable Bracket 2
Installing the Wings 3
Placing the Bracket 3
Cutting the Hole 4
Uninstalling the Bracket 5
Technical Assistance 6
Warranty 7
Return Process 8

1
Thank you for purchasing the REBR Reusable Bracket. At Origin Acoustics, we take
pride in providing you with a high quality product. All of Origin Acoustics’ speakers
are designed to have excellent sound quality, longevity, and a simple installation
process.
Thisinstructionbookletcoversthenecessaryinformationforasmoothinstallation,
including: the tools you will need, step-by-step instructions for installation,
troubleshooting tips for any errors that may occur, and all warranty information.
If for any reason you experience problems or if you have installation questions
please call us at [phone]. Hours of operation are 8:00am to 5:00pm (Pacific
Time), Monday through Friday.
Introduction

2
What’s Included
• Drywall Saw
• Measuring Tape
• Drill
• Screws
• Hammer
• Nail
Tools & Items
Our reusable installation bracket (REBR68) is designed to be used as a new
construction bracket for our Director 6 and 8” speakers. Additionally, the center
plastic ring can be removed once the sheet rock has been cut to accommodate
our speaker. With the plastic ring you can simply attach a new set of installation
wings and reuse the bracket for the next project you’re working on. This will save
you time and cost for your larger new home projects.
About the Reusable Bracket
Bracket Wings (2)

3
Oncedesiredspeakerlocationisfound,
locate desired wing positions on the
reusable bracket that coordinate with
the ceiling joists for a secure fit. Line up
and place the four pins of the bracket
to the four holes of the wing. Attach
the wings by locking in place with the
included metal clips.
1. Installing the Wings
Wing Bracket
Place the bracket between ceiling
joists using the ruler marks for your
desired location. Either nail or staple
the bracket wings to the joists.
2. Placing the Bracket
Joist
Bracket
Wing

4
Make sure the “lip” of the reusable bracket is facing down into the room. The “lip”
allows the bracket to act as a template for cutting the speaker cutout in the sheet
rock. Cut along the inside of the bracket hole where the hole should be. Use a
keyhole or drywall saw to cut the hole.
3. Cutting the Hole
Bracket
Bracket Lip
(Face Down)

5
Bracket
Unsnap
Bracket
Joint
To remove the bracket, squeeze the metal clips to loosen each wing. The wings
can be cut if needed. They will not be used again. Once the wings are detached,
unsnap the bracket at the joint to allow the bracket to bend for easy removal
through the cutout. The bracket can be used again by adding another pair of
REBRW20 wings.
4. Uninstalling the Bracket
Wing
Bracket

6
If you have any questions or concerns about installing or using this product, you
can reach us through one of the following methods:
Phone: [phone]
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: [e-mail]
If you are having technical trouble, please include the model number and
briefly explain what steps you took to resolve the problem in your email, or
be prepared to answer these questions over the phone. If you are considering
returning the product, it’s required that you contact Origin Acoustics prior to any
return attempts. This way we can determine if the issue can be resolved without
returning the product, or if needed we can provide instructions and support for
the return process.
Technical Assistance

7
Origin Acoustics warrants to the original retail purchaser only that this Origin
Acoustics product will be free from defects in materials and workmanship,
provided the speaker was purchased from an Origin Acoustics authorized dealer.
If the product is determined to be defective, it will be repaired or replaced at
Origin Acoustics’ discretion. If the product must be replaced yet it is no longer
manufactured, it will be replaced with a model of equal to or greater value that is
the most similar to the original. If this is the case, installing the replacement model
may require mounting modifications; Origin Acoustics will not be responsible for
any such related costs.
Limited Lifetime Warranty
This warranty may not be valid if the product was purchased through an
unauthorized dealer. This warranty only applies to the individual that made the
original purchase, and it cannot be applied to other purchases. The purchaser
must be prepared to provide proof of purchase (receipt). This warranty will not
be valid if the identifying number or serial number has been removed, defaced,
or altered.
Requirements & Warranty Coverage

8
• Accidental damage
• Damage caused by abuse or misuse
• Damage caused by attempted repairs/modifications by anyone other than
Origin Acoustics or an authorized dealer
• Damage caused by improper installation
• Normal wear, maintenance, and environmental issues
• Damage caused by voltage inputs in excess of the rated maximum of the unit
• Damage inflicted during the return shipment
Not Covered by Warranty
Before making any return attempts, it is required that you first contact Origin
Acoustics. Return product to Origin Acoustics or your dealer, either in person or by
mail. It’s preferable if the product is returned in the original packaging. If this isn’t
possible, the customer is responsible for insuring the shipment for the full value
of the product.
This warranty is in lieu of all other expressed or implied warranties. Some states
do not allow limitations on implied warranties, so this may not apply depending
on the customer’s location. (For more information, see Magnuson-Moss Warranty
Act.)
Return Process

www.originacoustics.com • 844-674-4461
©2017 Origin Acoustics