Origin SINGLE BEDFRAME User manual

O R I G I N
B E D F R A M E
ASSEMBLY INSTRUCTIONS

2
I. DISCLAIMERS & NOTES
Attention: Important Safety Disclaimers
For your safety,please read all instructions carefully before installing the bedframe .
IMPORTANT :
Two people are required to assemble the bed frame .
Do not put the bed frame, the components or tools on the floor.
Do not drag across the floor.
WEIGHT LIMITS :
The bed frame is not rated to support weight exceeding 400
kgs. This includes the mattress and bedding.
Exceeding this weight restriction could damage the bed frame
and/or cause injury and will void the warranty.
SWL : 400kgs

3
II. PRODUCT DIMENSIONS
Unit：mm
P/N
Length
Width
Headboard
Height
Footboard
Height
Sideboard
Height
Mattreess
Platform
Height
Free Height
Under
Furniture
Mattress
Length
Mattress
Width
N.W
（kg）
G.W
（kg）
SINGLE
90x190cm
1970
960
900
320
300
265
190
1900
900
44.0
49.0
SUPER
SINGLE
107x190cm
1970
1130
900
320
300
265
190
1900
1070
45.0
50.0
QUEEN
152x190cm
1970
1580
900
320
300
265
190
1900
1520
48.0
53.0
KING
183x190cm
1970
1890
900
320
300
265
190
1900
1830
50.0
55.0

4
PRODUCT DIMENSIONS

5
III. PARTS LIST
Ensure you have received all the parts listed blow before discarding the packing materials.
No.
REF. Picture
Part Name
Specifications
Quantity
Material
A
Side board - LH
1890*113*30mm
1
White Oak
B
Side board - RH
1890*113*30mm
1
White Oak
C
Foot board
900/1070/1520/1830*133*30mm
1
White Oak
D
Head board - Upper
900/1070/1520/1830*100*30mm
1
White Oak
E
Head board - Middle
900/1070/1520/1830*100*30mm
1
White Oak
F
Head board - Lower
900/1070/1520/1830*113*30mm
1
White Oak
G
Foot End Legs - LH
320*100*30mm
1
White Oak
H
Foot End Legs - RH
320*100*30mm
1
White Oak
I
Head End Legs - LH
900*100*30mm
1
White Oak
J
Head End Legs - RH
900*100*30mm
1
White Oak

6
PARTS LIST
No.
REF. Picture
Part Name
Specifications
Quantity
Material
K
Cross Bars
1910*60*38mm
2
Pine
L
Cross Bars Holders
/
4
White Oak
M
Mattress Platform
900/1070/1520/1830*457*30mm
4
Pine and Beech
N
Wood Locating Pins - Big
￠10*50mm
24
Pine
O
Wood Locating Pins - Small
￠8*40mm
8
Pine
P
Screw Rods
M8*90mm
12
S/S
Q
M8 Nuts
M8
12
Zinc Plated
R
Cross CSK Tapping Screws
4*35mm
12
Zinc Plated
S
Crescent Shape Plastic Pads
32*9*16mm
12
Plastic
T
Spanner
14mm
1
Zinc Plated

7
IV. INSTALLATION
Locating Pins - Big (N)
STEP1：
Remove box cover, take out all of the packing materials.
Check all the components and parts are correct quantities and in good
condition.
STEP2：
Install the Screw Rods (P) and Wood Locating Pins - Big (N) to Foot End
Legs - LH (G) & Foot End Legs - RH (H) as feature - 1 .
Foot End Legs - LH(G) Foot End Legs - RH(H)
Feature - 1
STEP3：
Install the Screw Rods (P) and Wood Locating Pins - Big (N) to Head End
Legs - LH (I) & Head End Legs - RH (J) as feature - 2 .
Head End Legs - LH (I) Head End Legs - RH (J)
Feature - 2
Locating Pins - Big (N)
Screw Rods (P)
Screw Rods (P)

8
INSTALLATION
STEP5：
Install the Foot board (C) to Foot End Legs - LH (G) & Foot End Legs - RH
(H) and place the Crescent Shape Plastic Pads (S) and use 14mm Spanner
(T) to lock and tighten the M8 Nuts (Q) as feature - 4 .
Foot board Assembly
Feature - 4
STEP4：
Install the Wood Locating Pins - Small (O) to Cross Bars Holders (L) and
place Cross Bars Holders (L) to the Head board - Lower (F) & Foot board (C)
in correct position and then use phillips screwdriver to lock and tighten the
Cross CSK Tapping Screws (R) lock and tighten as feature - 3 .
Head board - Lower(F)
Foot board(C)
Feature - 3
Foot End Legs
- LH (G)
Cross CSK Tapping
Screws (R)
Foot
board (C)
M8 Nuts (Q)
Wood Locating Pins
- Small (O)
Crescent Shape
Plastic Pads (S)
Foot End Legs
- RH (H)
Cross Bars
Holders (L)
Cross Bars
Holders (L)

9
INSTALLATION
Crescent
Shape
Plastic
Pads (S)
Head board Assembly ( Rear)
Feature - 6
Head board
- Lower(F)
STEP6：
Install the Head End Legs - LH (I) & Head End Legs - RH (J) to Head board
Upper (D),Head board - Middle (E) & Head board - Lower (F) and place the
Crescent Shape Plastic Pads (S) and use 14mm Spanner (T) to lock and
tighten the M8 Nuts (Q) as feature - 5 & 6 .
Head board Assembly ( Front)
Feature - 5
Head board -
Middle (E)
Head End
Legs - RH (J)
M8 Nuts (Q)
Head board -
Upper (D)
Head End
Legs - LH (I)
Cross Bars
Holders (L)

10
INSTALLATION
Mattress
Platform (M)
STEP8：
Place the Cross Bars (K) to Cross Bars Holders (L) in correct position and
place the Mattress Platform (M) on the Cross Bars (K) as feature - 8.
Feature - 8
STEP7：
Install the Head board Assembly & Foot board Assembly to Side board - LH
(A) & Side board - RH (B) and place the Crescent Shape Plastic Pads (S)
and use 14mm Spanner (T) to lock and tighten the M8 Nuts (Q) as feature -
7.
Feature - 7
Cross Bars
(K)
Side board
- LH(A)
Cross Bars
Holders (L)
Side board -
RH (B)
Head board
Assembly
Foot board
Assembly

11
V. WARRANTY
We guarantee this product is free from defects in material and workmanship under normal usage.
Our product warranty does not cover damage caused by misuse or accident.
For Warranty Information, please visit our website: https://originmattress.com.sg

O R I G I N
B E D F R A M E