Orion Technology X20 User manual

Quick Guide
1
Overview
3
Web Viewer
Item Name Description
a
Display
Selected
Tab
Consists of Live and Setup menu.
b
Language You can select in which language the Web
Viewer is displayed.
c
Full Screen Displays the image in full screen.
d
Stream
Change
If selecting Dual Stream, the streams are
shifted in the order of the 1st (the first
stream) <2nd (the second stream).
e
Playback Starts to transmit the image manually.
f
Digital
Zoom Zooms in or out on the screen.
g
Capture Saves current image as .jpg image file.
h
Panorama
Map
Conveniently control PTZ with the Panorama
Map.
i
Lens
Adjustment
Adjusts the zoom (zoom in/out) and focus of
lens.
j
Stop Stops transmitting the image manually.
 Learning the Live screen
3.
You should run the activities after installing corresponding Active-X.
4.
If the Active-X installation window does not appear in the top right area for a
long time (longer than 1 minute), change the “Internet Options”settings.
5.
"Control Panel > Internet Options > Security" menu, press [Custom
level...] button.
6.
Select all the ActiveX-related options as available.
NETWORK IR PTZ CAMERA
(X20/X30)
 What's Included
Camera CD Manual Quick Guide BNC Cable
Cable Sponge L-Wrench (4mm 1ea, 2.5mm 1ea) 7-position Terminal Block (2ea) Ferrite Core
 At a Glance
Appearance
Item Name Description
a
Mount Adaptor Accessory for connecting a camera to a bracket.
b
Zoom Camera Camera with ZOOM LENS.
c
Zoom IR LED IR angle is automatically adjusted by optical zoom. IR LED is on when zoom ratio is above x2.
d
Illumination Sensor Detects incoming light to control the IR LED.
e
Wide angle IR LED IR LED is on when zoom ratio is below x2.
bf jihg
a
c
d
e
e
d
c
b
a

 How to connect to the camera
Since the network settings of your network camera are not configured by factory default, you cannot access to WebRA. To configure
your network, run the “MDload”in CD to check the IP and access to your camera.
1.
Press <Search> button to search for the network camera linked to your
network.
2.
The search results are displayed if finished. You can distinguish your network
camera(s) by checking its model information. Click your desired apparatus
whose network settings you want to configure in the list.
3.
Select “DHCP”or “STATIC”for <Network Type> in bottom left. If selecting
“STATIC”, enter the values for IP Address, Subnet Mask, Gateway, and DNS
information, and then press <Apply>.
4.
The list is automatically updated in a moment. Check if all the values look
correct and finish the network environment settings.
1
Overview
2
Connecting
3
Web Viewer
 Connecting to External Device
Installation monitor
Connect the video output cable of the network camera with the installation monitor.
You can watch the video input from the installed camera in the monitor.
J
You should not use the installation monitor continuously as it is only designed to check the video output during the camera installation process.
Connecting with power supply
Connect the power cable.

A ferrite core accessory is included to be used when connecting the network cable in order to suppress electromagnetic noise.
2
Connecting
Connecting to the network
To connect with a PC ina local network
If you connect the network camera with a PC in the same network, you can perform monitoring and setting process by using the PC's Web
Viewer.
1.
Connect the network port on the back panel with a router or hub.
2.
Connect a local PC with a router or hub.
3.
Enter the address in “http://IP address:web service port”format in address window of the web browser or dedicated software
program at local PC.

Ex : http://192.168.0.23:80 web service port is set as 80 by factory default. You can modify the port number in Network Setup screen.
4.
Enter your ID and password to log in. You can watch the monitoring screen after login.
J
You must register your login password when accessing for the first time.
To change your password, refer to "How to connect".
To connect with a PC in remote network
You can access the network camera from your PC through the internet.
1.
Connect router's network port directly with static IP LAN cable or with the ADSL modem.
2.
If using a router, you should configure the port forwarding settings.

You can get relevant support from your router manufacturer or qualified installation company for how to configure the port forwarding of your router.

When you access the network camera from your PC via internet, make sure to access the following site.
Bottom View of Installation Base
Item Name Description
a
Network
Used to connect the network.
Status
LED
LINK Orange On Connection to 10/100Mbps Network / LAN.
Unlit No network connection established.
ACT Green On Camera is booting up.
Flash Firmware Upload in progress.
b
Power Connector Used to connect to a power cable.
Audio In terminal Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal).
Audio Out terminal The Audio output (line level), which could be connected to a line output of a microphone system or an active
speaker with a built-in amplifier.
RS-485 For PTZ control, connect this line to keyboard and DVR. To control multiple cameras at the same time, RS-485
communication lines of them are connected in parallel.
c
Alarm Out terminal Two relay output (2A : AC120V / DC24V).
Alarm In terminal Two analog (dry contact) alarm input.
d
Video Output Terminal Analog video out terminal which is used in installing.
e
Micro SD Card Slot Allows a Micro SD card to be inserted.
f
Reset Button Press this button to restore the camera configuration to its factory default settings.
 Web Viewer
1.
Security page (Internet Explorer) is displayed. Click <Continue to this website (not recommended).>.
2.
Enter your ID and password in the ID input window.

Default user name : ADMIN
Password : 1234
d
e
f
a
b
c