Orion XTReme 400 User manual

Owners Manual: (revis ed)
XTR eme 400 / 800 2 channel amplifier
1
2
3 4 5
6
7 8
9 10
11 12
1. Power LED - when lit indicates the amplifier is on
2. Output Configuration Switches - determine the output
config. of the amplifier
3. Independent Gain Controls - continuously adjust from
200 mV to 5Vrms for full power output
4. RCA Inputs - accepts RCA input from a source unit
5. Aux RCA Outputs- extra connection for more amplifiers
6. Aux RCA Output Control - determines output of RCA
outputs
7. Low Pass Freq. Control - adjusts freq. of LP x-over
8. Low Pass X-over Activation Switch- turns x-over on / off
9. High Pass Q adjust - adjusts the "Q" of the HP x-over
10. High Pass x10 switch - selects the freq. range of the
HP x-over
11. High Pass Freq. Control - freq. adjust of HP x-over
12. High Pass X-over Activation Switch - turns x-over on/off
Amp Model 4ohm P ower L owes t R ecommend
Impedance in S tereo F us e S ize Dimens ions L x W x H
12" x 10.25" x 2.25"
18" x 10.25" x 2.25"
S /N
100dB
100dB
THD
<0.1%
<0.1%
F requenc y
R es pons e
6hz to 50K hz
+/- 0.5dB
6hz to 50K hz
+/- 0.5dB
XTR-400
XTR-800
100 watts
200 watts
2 ohms
2 ohms
(2) 20 amp
(2) 30 amp