OSCAL FLAT 1 User manual

Only the Brave
QUICK
START
GUIDE
FLAT 1
EUT Name:Smart phone
HVIN/Model:FLAT 1C,FLAT 1


English
Type-C Port
Headphone Jack Speaker
Microphone
Screen
Front Camera
Receiver


Volume+
Volume-
Power
Camera Flashlight
SIM/TF Card


How to insert the card
To make sure your smartphone be able to call, put the
SIM card in the following order.
Take out the card slot and place the Nano card or Nano card
and TF card with the metal side facing down.
Make sure the bevel angle is aligned with the bevel angle
of the card slot and placed in the corresponding card slot.
Insert the card holder into the phone in the direction of
the arrow.
1
Pressthecardpin intothe sidehole andthen thecard tray
pops upand pullout it.
SIM 1 SIM 2
SIM 1
TF
Card
SIM 1 SIM 2
SIM 1
TF
Card


Language switching settings
How to boot
How to send SMS, MMS
SAR
Non-removable battery
Press the power button for 3-5 seconds
to boot
Main menu--settings-system setting-- language and
input method
Open the SMS app
When writing a text message
You can take a new picture or video right away.
Selecting or sending
MMS - video
Select New Information
Enter a phone number or browse your contacts
Select Edit Information and enter your text
Send
SMS
The maximum electromagnetic radiation absorption ratio
(SAR) of this product is ≤2.0W/kg.
In line with the requirements of the national standard
GB 21288-2007.
Language and input method--language--language adding
Select the language you need, the system will automatically
jump back to the language interface
Select the icon after the language bar and drag it to the
2
4
5
3
3


Safety- In order to ensure safely using
the product, you must strictly abide by
the following rules
The phone should be at least 15 cm away from any
medical implant or rhythm adjuster and never put the
device in your coat pocket.
Do not expose the device and other batteries together
with the high temperatures or heat-generating equipment
such as sunlight, heaters, microwave ovens, ovens or water
heaters. Overheating of the battery can cause an explosion.
When charging is complete or not charging, disconnect
the charger from the device and unplug the charger from
the power outlet.
If the device is equipped with a non-removable battery,
do not replace the battery yourself to avoid damaging the
battery or device.
Use of an unapproved or incompatible power source,
hazards.
Do not disassemble or reset the battery, insert other objects,
immerse in water or other liquids to avoid battery leakage,
Do not drop, crush, scratch or puncture the battery to
avoid subjecting the battery to excessive external pressure,
resulting in internal short-circuit and overheating of the
battery.
The company does not bear the responsibility for accidents
caused by non-standard related charging equipment.
6
Hereby, Shenzhen DOKE Electronic Co., Ltd declares that this
radio equipment type is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: http://ww-
w.oscal.hk/ce/


Maintenance
Thoroughly understand the maintenance of this mobile
and extend the service life of the mobile phone as much
as possible.
Please follow the instructions in the manual to open the
phone, disassemble the accessories, and do not try other
methods.
Please avoid falling, knocking or shaking your phone. Rough
handling of the phone can cause the screen to rupture,
damaging the internal circuit board and the delicate structure.
Do not use chemical solvents or detergents to clean your
phone.Wipe the phone case with a soft cotton cloth
dampened with water or a mild soap.
Clean the lens with a clean, dry, soft cloth.
(Example: camera lens) and display.
If you encounter an abnormal image such as a crash during
use, the processing method is as follows: For a mobile phone
that cannot remove the battery, please press and hold the
power button for more than 12 seconds, the mobile phone
will be forced to restart (unlock the phone when restarting)
It can solve the general bug; for the mobile phone that can
remove the battery, please remove the battery, then insert
the battery and restart it to solve the bug.
When the charger is not in use, please unplug it from the
power outlet. Do not connect the battery that has been
fully charged to the charger for a long time, as overcharging
will shorten the battery life.
7

IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son
fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent
causer un mauvais fonctionnement de l'appareil.
Déclaration d'exposition aux rayonnements:
Cet appareil répond aux exigences du gouvernement en matière d'exposition aux ondes radio. Cet appareil est conçu et fabriqué pour
ne pas dépasser les limites d’émission pour l'exposition à l'énergie de radiofréquence
(RF) établies par la Federal Communications Commission du gouvernement des États-Unis.
La norme d’exposition pour les appareils sans fil emploie une unité de mesure connue sous le nom de débit
dabsorption spécifique, ou das.
1,6 W/Kg. Les Tests de das sont effectués en utilisant des positions de fonctionnement standard (10mm)
acceptées par la IC, I'appareil émettant à son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquence testées.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmfull interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particularl installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission Interference
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device meets the government's requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device emplovs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/Kg . Tests for SAR are conducted using standard operating positions (10mm) accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.
Radiation Exposure Statement: