OSCG OS-E1UF User manual

Manual for OS-E1UF Cable Gland
OSCG Co., Ltd
.
Address: #1242, Nakdong-Daero, Sasang-Gu, Busan, Korea
OSCG Co., Ltd. Tel : [phone] Fax : [phone] Website:www.oscg.net
50107566000_BA OS-E1UF-2018/11
OS-E1UF MANUAL 1 / 2
Manual for OS-E1UF Cable Gland
1. Application
OS-E1UF Cable gland is for use with all type of armoured cable for Zone 1 & Zone 2 in hazardous area.
2. Standard Applicable
ATEX
IECEx
EN 60079-0:2012+A11:2013
IEC 60079-0:2011 Ed. 6
EN 60079-1:2014
IEC 60079-1:2014 Ed. 7
EN 60079-7:2015
IEC 60079-7:2015 Ed. 5
EN 60079-15:2010
IEC 60079-15:2010 Ed. 4
EN 60079-31:2014
IEC 60079-31:2013 Ed. 2
3. Certificate No. & Special conditon 'X'
A. IECEx : IECEx PRE 17.0063X
B. ATEX : 17 ATEX 11456X
C. Special condition 'X' :
1) Ambient temperature : -60
℃
~ +110
℃
(IEC 60079-0 5.1.1)
4. Technical data
A. Process control system : ISO 9001 : 2008, ISO 14001 - 2004 , RoHs
B. Certification : IECEx, ATEX
C. Marking : II2G Ex db IIC Gb, Ex eb IIC Gb, II2D Ex tb IIIC Db
D. Suitable for use in Zone 1, Zone 2, Zone 21 & Zone 22
E. Suitable for use in gas Groups IIA, IIB and IIC, dust Groups IIIA, IIIB and IIIC
F. Service Temperature: -60C˚~+110C˚
G. Ingress protection: IP66/68 (IEC 60529 / EN 60529)
H. Accessories: Lock nut, Sealing Washer, shroud, serrated washer(tooth/teeth washer) and earth tag
I. Materials: Brass C3604 BE-F
(CuZn38Pb4)
/ Brass C3604 BE-F with Nickel Plated / STS304 / ANSI 316 /
J. Threads engaged ≥5 (IEC 60079-1 5.3 Threaded joints)
5. Cable Specification for OS-E1UF

Manual for OS-E1UF Cable Gland
OSCG Co., Ltd
.
Address: #1242, Nakdong-Daero, Sasang-Gu, Busan, Korea
OSCG Co., Ltd. Tel : [phone] Fax : [phone] Website:www.oscg.net
50107566000_BA OS-E1UF-2018/11
OS-E1UF MANUAL 2 / 2
6. Instruction for Installation
A. Preparation tools before the product installation (Recommendation):
Spanner 2ea, ruler, pen, cable cutter, clipper
B. Product assembled view
<Drawing>
<Legend>
①Lock nut
②IP Washer
③Hub Body
④Packing
⑤Lay Braid
⑥Wire Braid
⑦Middle Body
⑧Packing
⑨
Coupler Nut
C. Product Installation
1) Check the specification and diameter of cable to select the cable gland size.
2) Disassemble the
③
hub body from
⑦
middle body and assemble
③
hub body to the equipment
3) Except for ⑤lay braid, put the cable into gland(⑥to ⑨)
4) Peel out the outer jacket of cable by cable cutter, and cut the cable armour/braid wire by clipper.
5) Leave enough length of wire to fit it in between ⑤lay braid and ⑥wire braid.
6) While the wire is fitted in between ⑤lay braid and ⑥wire braid, tighten them into ③hub body.
7) Tighten ⑦middle body and ⑨coupler nut accordingly by spanner.
*⑨coupler nut does not have to be tightened extremely
D. Notes in installations
1) Be cautious when using the tools.
3) When assembling gland body to equipment, IP washer shall be placed in between, and it shall be
by gland fully to maintain IP grade.
4) Be careful not to damage the core by the tool when removing the outer sheath of the cable.
5) Locknut is a part of protection for Ex e and Ex tb.
6) Clamping of cable shall be installed to ensure that pulling and twisting is not transmitted to the terminal.
E. Torque value
1) Product disassembled view
2) ⑦Middle Body & ①Lock nut torque(N.m) value
Size
16
20
25
32
40
50
63
75
90
100
115
THREAD
TYPE
METRIC
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5 M32x1.5 M40x1.5 M50x1.5 M63x1.5
M75x1.5
or 2.0
M90x1.5
or 2.0
M100x1.5
or 2.0
M115x1.5
or 2.0
NPT NPT 1/2"
NPT 1/2"
NPT 3/4"
NPT 3/4"
NPT 1"
NPT 1"
NPT 1-1/4"
NPT 1-1/4"
NPT 1-1/2"
NPT 1-1/2"
NPT 2"
NPT 2"
NPT 2-1/2"
NPT 2-1/2"
NPT 3"
NPT 3"
NPT 3-1/2"
NPT 3-1/2"
NPT 4"
NPT 4"
Middle Body 30 35 45 50 60 80 90 120 180 240 240
Lock nut(S/L)
20 20 / 25 25 / 45 45 / 50 50 / 60 60 / 85 85 / 100 100 / 120 120 / 140 140 / 160 160

OSCG CO., Ltd
(Samrak-Dong), 1242, Nakdong-Daero,
Sasang-Gu Busan
Korea
declares under the sole responsibility that the following product:
Product designation: Cable gland
Type designation: OS-E1UF
Approval number: Presafe 17 ATEX 11456X
Description: Cable gland for electrical installation
Production Quality Assessment Notification: Nemko 03ATEX4338Q
corresponds to all the relevant provisions of the directives listed below and valid harmonized
and / or international and national standards - including all applicable changes at this time of
issuing this document.
Directive Standard
2014/34/EU Equipment and protective
systems intended for use in potentially
explosive atmospheres (ATEX)
EN 60079-0:2012 + A11:2013
EN 60079-1:2014
EN 60079-7:2015
EN 60079-31:2014
2014/35/EU Electrical apparatus
(Low voltage directive)
EN 62444:2013
Product details:
Marking: II 2 G Ex db IIC Gb
II 2 G Ex eb IIC Gb
II 2 D Ex tb IIIC Db
Ambient temperature range: -60°C … +110°C
Name and address of importer:
WISKA Hoppmann GmbH
Kisdorfer Weg 28
24568 Kaltenkirchen, Germany
Fon: [phone]
E-mail: [email protected]
2018-11-06, Busan
…………………………….
Date & place of issue
…………………………….
Engineering Director
Signature of Authorized Person
I.J.Kim
EU DECLARATIONOF
CONFORMITY