OSP Designs MET12430 User manual

MET12430 / MET12530
SWIVEL STOOL 30”
ASSEMBLY INSTRUCTIONS
OSP DESIGNS SEATING LIMITED WARRANTY
OSP Designs chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor, freight
or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
December, 2017
MET12530MET12430
WARNING
1. Do not use this product unless all screws and bolts are
securely tightened.
2. Check that all screws and bolts are tight every three months
or as needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.

PARTS LIST
(C) Backrest (1 PC)
MET12430
(Backrest shown)
(D) Foot Rest (1 PC)
(E) Leg (1 PC)
(A) Frame (1 PC) (B) Seat Cushion (1 PC)
HARDWARE LIST
DRAWINGNO DESCRIPTION SIZE QUANTITY
1
2
3
4
5
6
Small Bolt 1/4” x 25mm
1/4” x 45mm
4 PCS
10 PCS
4 PCS
18 PCS
18 PCS
1 PC
Medium Bolt
Large Bolt
Flat Washer
Lock Washer
Allen Wrench
1/4” x 55mm
1/4” x 19mm
1/4”
4mm

STEP 1
STEP 2
(E)
(A)
(C)
(B)
(6)
(2)
(2) (5) (4)
(4)
(5)
(3)
(6)
(5)
(4)
DO NOT FULLY TIGHTEN BOLTS
FULLY TIGHTEN ALL BOLTS

STEP 3
STEP 4
(E)
(B)
(C)
(A)
(D)
(2)
(5)
(4) (3)
(6)
(1)
(5)
(4)
FULLY TIGHTEN ALL BOLTS
FULLY TIGHTEN ALL BOLTS
NOTE: PLACE STOOL UPSIDE DOWN ON A NON MARRING SURFACE.