OSP Designs MD2542 User manual

MD2542
MERIDIAN COMPUTER DESK
OPERATING INSTRUCTIONS
LIMITED WarranTy
OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects
and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP
Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s
responsibility to prepay freight on any components returned to the factory. OSP Designs will pay return freight on components covered under
terms of warranty.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email parts@officestar.net, by Fax
1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. OSP Designs P.O. Box
3520 Ontario, California 91761 USA
WarnInG
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.

MD2542
MERIDIAN COMPUTER DESK
ASSEMBLY INSTRUCTIONS
MD2542
MERIDIAN COMPUTER DESK
ASSEMBLY INSTRUCTIONS
© Office Star Products March 2011
STEP 1
1
STEP 3
STEP 2
STEP 4
STEP 5 2
7
6
5R
5L
8
8
1
3
4
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert two Wooden Dowels (8) into each end of Back Panel (6) and Bottom Panel (7). Attach Back Panel (6) and Bottom Panel (7) to
Leg Frame (5R), secure Back Panel (6) and Bottom Panel (7) to Leg Frame (5R) by setting locks into position. Attach Back Panel (6) and Bottom Panel (7)
to Leg Frame (5L), secure Back Panel (6) and Bottom Panel (7) to Leg Frame (5L) by setting locks into position.
STEP 2 Insert five Wooden Dowels (8) into top of assembly. Attach Desk Top Frame (1) to assembly and secure by setting locks into position.
PART QTY
1. Desk Top Frame ..............1
2. Glass Top ...................1
3. Keyboard Tray ................1
4. Organizer Box ................1
5. Leg Frame (5L & 5R) ...........2
6. Back Panel ..................1
7. Bottom Panel .................1
8. Wooden Dowel ..............14
STEP 3 Carefully slide Keyboard Tray (3) onto built-in glides of assembly.
STEP 4 Place Organizer Box (4) into assembly.
STEP 5 Carefully place Glass Top (2) onto Desk Top Frame (1).
ATTENTION: MAKE SURE ALL ‘LOCKS’ ARE IN THE LOCKED POSITION BEFORE USING DESK.