Lesro Mystic Steel Utility User manual

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various models and congurations. Your
product may not look exactly as shown in the diagrams.
Recommendation: Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002
Phone [phone]
Fax [phone]
www.lesro.com
1. Unpack and identify all parts. Note: Leg
frames are interchangeable – no left or
right.
2. Place the tabletop upside down on a
soft, clean surface to prevent scratches.
3. Attach one leg frame to tabletop using ¾”
Phillips bolts and washers into threaded
inserts, as shown in gure 1. Be sure
legs angle out. Keep bolts slightly loose
for now.
4. Connect cross tube to connecting post
on leg frame using ½” Allen bolt, as
shown in gure 2. Keep bolt slightly
loose for now.
5. Connect second leg frame to cross tube
and tabletop, as shown in gure 3.
6. Tighten all 18 bolts securely at this time.
7. Using 2 or more people, carefully ip
table to upright position. If you ordered
the optional shelf, please follow shelf
installation instructions on page 2. If you
did not order the shelf, your product is
now fully assembled and ready to use.
© 2011 Lesro Industries, Inc. March 2011
Assembly Instructions
For Steel Frame Utility Tables
Parts List
Tabletop
Leg Frames, 2 pcs.
Cross Tube
Shelf (optional)
Figure 2
Figure 1
Hardware Pack
¾” Phillips Bolts, 16 pcs.
Washers, 16 pcs.
½” Allen Bolts, 2 pcs.
Allen Wrench
¾” Screws for Optional
Shelf
Figure 3
Legs
angle
out
Connecting Post
Cross
Tube
Table without Optional Shelf

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various models and congurations. Your
product may not look exactly as shown in the diagrams.
Recommendation: Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002
Phone [phone]
Fax [phone]
www.lesro.com
1. Table should be fully assembled
and in the upright position before
installing optional shelf. All leg
bolts should be tightened securely
before starting.
2. Slide the shelf under the tabletop
from one end as shown in gure 4.
3. Center the shelf accurately
between leg frames.
4. Attach shelf to cross tubes using
wood screws as shown in gure 5.
Tighten all screws securely using
care not to strip.
5. Your product is now fully
assembled and ready to use.
© 2011 Lesro Industries, Inc. March 2011
Assembly Instructions
For Steel Frame Utility Tables
Figure 5
Figure 4
Shelf Installation Instructions (Optional)
Table with Optional Shelf