OSP Home Furnishings MD2542 User manual

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.officestar.net or call or write us.
MD2542
November, 2019
42’’ MERIDIAN COMPUTER DESK

LIMITED WARRANTY
OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective
products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of
production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown
on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection
with product abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed
in accordance with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied,
other than those specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose.
OSP Home Furnishings™ will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights and you may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry.
Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible
to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-
950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide
model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings™ will:
(a) Supply compatible components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any
components returned to the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings™.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.

1Wooden Dowel 14 PCS + 1 EXTRA
1 PCAnti-Tip Kit2
HARDWARE LIST
NO DRAWING DESCRIPTION QUANTITY
(C) Left Leg Frame (1 PC) (D) Right Leg Frame (1 PC)
(E) Back Panel (1 PC) (F) Bottom Rail (1 PC)
(A) Top Frame (1 PC) (B) Glass Top (1 PC)
(G) Keyboard Tray (1 PC) (H) Organizer Box (1 PC)
PARTS

If you need to remove the drawer with ball bearing slides from the unit, follow the
steps below to prevent any damage to the slides or the drawer.
If you need to remove the drawer, please pull the drawer all the way out, then push the plastic release
lever of the ball bearing slide up on one side and down on the other side, and then pull the drawer
completely out. See detail #A.
DRAWER INSTALLATION
Detail #A
Detail #B
To place the drawer back, simply push the ball bearing cart all the way to the end of the slide (in both sides),
and align the slide runners on the drawer with the slide tracks on the unit and push it carefully inside until
it stops. See detail #B.
Note: If they do not align properly, remove and repeat step 2

STEP 2
STEP 1
(C)
(E)
(A)
(D)
(1)
(F)
(1)

STEP 3
STEP 4
(H)
(G)
Carefully install keyboard tray
(see drawer installation page)

STEP 5
(B)
CAREFULLY PLACE GLASS TOP (B) ONTO TOP FRAME (A).

Long Screw
Short Screw
Support
Support
Anchor
Safety Strap
WALL
ANTI-TIP KIT INSTALLATION
STEPS:
Place desk in desired location. Carefully drill a ¼’’ pilot hole into wall, gently tap Anchor into pilot hole. Secure one
Bracket to wall using one Long Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS SCREWDRIVER (not
provided). Secure remaining Bracket to rear of desk using one Short Screw, FULLY TIGHTEN SHORT SCREW
USING PHILLIPS SCREWDRIVER (not provided). Loop Safety Strap through Brackets and fasten Safety Strap.