OSP Home Furnishings MF4221 User manual

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.officestar.net or call or write us.
September, 2021
MF4221
RUSTIC WRITING DESK

LIMITED WARRANTY
OSP Home Furnishings® warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. OSP Home FurnishingsTM will repair or replace, at its option, without charge to the original purchaser only, defective products
or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of production
may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown on your
original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product
abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance
with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied, other than those
specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose. OSP Home
Furnishings® will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no
matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly
remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 3:30 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number,
proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings® will: (a) Supply compatible
components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any components returned to
the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.

PARTS
(C) Right Side Frame (1 PC)
(E) Rear Cross Bar (1 PC)
(A) Desktop (1 PC) (B) Left Side Frame (1 PC)
(D) Rear Cross Bar (2 PCS)
1Bolt 12 PCS
12 PCS
12 PCS
6 PCS
1 PC
Flat Washer
Lock Washer
Wood Screw
Allen Wrench
1/4” x 2”
1/4” x 5/8”
1/4”
4mm
2
3
4
5
HARDWARE LIST
DESCRIPTION SIZE
NO QUANTITY
DRAWING
1/4” x 2”
Phillips screwdriver also needed for assembly (not provided)

If you need to remove the drawer with ball bearing slides from the unit, follow the
steps below to prevent any damage to the slides or the drawer.
If you need to remove the drawer, please pull the drawer all the way out, then push the plastic release
lever of the ball bearing slide up on one side and down on the other side, and then pull the drawer
completely out. See detail #A.
DRAWER INSTALLATION
Detail #A
Detail #B
To place the drawer back, simply push the ball bearing cart all the way to the end of the slide (in both sides),
and align the slide runners on the drawer with the slide tracks on the unit and push it carefully inside until
it stops. See detail #B.
Note: If they do not align properly, remove and repeat step 2

STEP 2
STEP 1
(D)
(E)
(D)
DO NOT FULLY TIGHTEN BOLTS.
REMOVE HANDLES FROM INSIDE DRAWERS. ATTACH HANDLES TO DRAWER FRONTS USING EXISTING SCREWS. FULLY TIGHTEN SCREWS.

STEP 4
STEP 3
DO NOT FULLY TIGHTEN SCREWS OR BOLTS
CAREFULLY TURN DESK TO THE UPRIGHT POSITION. APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN ALL SCREWS & BOLTS.
INSERT DRAWERS INTO DESK