OSP Home Furnishings SIERRA SRA09 User manual

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.officestar.net or call or write us.
SRA09
October, 2019
SIERRA END TABLE

LIMITED WARRANTY
OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective
products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of
production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown
on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection
with product abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed
in accordance with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied,
other than those specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose.
OSP Home Furnishings™ will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights and you may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry.
Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible
to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-
950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide
model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings™ will:
(a) Supply compatible components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any
components returned to the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings™.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.

1Bolt 8 PCS
4 PCS
4 PCS
1 PC
Cam Screw
Cam Nut
Allen Wrench
1/4” x 30mm
6.5 x 35mm
15 x 12.5mm
4 x 58mm
2
3
4
HARDWARE LIST
NO DRAWING DESCRIPTION SIZE QUANTITY
(C) Side Frame (2 PCS) (D) Crossbar (2 PCS)
(A) Top Panel (1 PC) (B) Shelf (1 PC)
1. Pick template layer.
2. add hardware (size/no size) sub layer if needed.
3. pick with letter set is needed.
3. add images and discriptions.
To French.
1. Select FRN in title layer.
2. If hardware is used, select FRN titles in hardware sub layer.
3. Rename all English discriptions to French discriptions.
PARTS
Phillips Screwdriver also needed for assembly (not provided).

STEP 2
STEP 1
(D)
(D)
(B)
(B)
(1)
(D)
(D)
(C)
(C)
(1)
DO NOT FULLY TIGHTEN BOLTS. FULLY TIGHTEN CAM SCREWS (2) AND CAM NUTS (3) USING PHILLIPS
SCREWDRIVER (NOT PROVIDED.)
DO NOT FULLY TIGHTEN BOLTS. FULLY TIGHTEN CAM SCREWS (2) AND CAM NUTS (3) USING PHILLIPS
SCREWDRIVER (NOT PROVIDED.)

STEP 3
(A)
(2) (3)
TURN TO THE UPRIGHT POSITION, APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN BOLTS USING ALLEN WRENCH (4).
FULLY TIGHTEN CAM SCREWS (2) AND CAM NUTS (3) USING PHILLIPS SCREWDRIVER (NOT PROVIDED.)