OSP Home Furnishings STFW-11 User manual

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.officestar.net or call or write us.
August, 2021
STFW-11 / STFG-2
KITCHEN CART

LIMITED WARRANTY
OSP Home Furnishings® warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. Home Furnishings® will repair or replace, at its option, without charge to the original purchaser only, defective products or
parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of production may
be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown on your original
sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product abuse
or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance with
the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied, other than those
specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose. OSP Home
Furnishings® will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no
matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly
remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 3:30 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number,
proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings® will: (a) Supply compatible
components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any components returned to
the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.

PARTS
(D) Top Frame (1 PC)
(A) Top Panel (1 PC) (B) Left Leg Frame (1 PC) (C) Right Leg Frame (1 PC)
(E) Middle Frame (1 PC)
(F) Support Frame (1 PC) (G) Bottom Frame (1 PC)
(H) Back Panel (1 PC) (I) Support (2 PCS)
(J) Drawer Front (2 PCS) (K) Left Drawer Side (2 PCS) (L) Right Drawer Side (2 PCS)
(M) Drawer Back (2 PCS) (N) Drawer Bottom (2 PCS)

PARTS
(Q) Tray Bottom (2 PCS)
(O) Tray Face (4 PCS) (P) Tray Side (4 PCS)

1Bolt 17 PCS
4 PCS
16 PCS
32 PCS
2 PCS
2 PCS
4 PCS
Bolt
Wooden Dowel
Screw
Screw
Holder
Screw
1/4” x 30mm
1/4” x 25mm
Ø8 x 20mm
4 x 30mm
3.5 x 15mm
190mm
5/32” x 30mm
2
3
4
5
6
7
1 PCHolder 457mm8
2 PCSScrew 5/32” x 40mm9
2 PCSFront Locking Caster N/A10
2 PCSRear Caster N/A11
1 PCAllen Wrench 4 x 75mm12
1 PCKey Wrench 12mm13
HARDWARE LIST
DESCRIPTION SIZE
NO QUANTITY
DRAWING
Phillips screwdriver also needed for assembly (not provided)

STEP 2
STEP 1
Front Locking Caster
Rear Caster
Key Wrench
FRONT
Holder
Screw
Phillips screwdriver required
(not provided)
FULLY TIGHTEN ALL SCREWS

STEP 4
STEP 3
FRONT
Bolt
Wooden Dowel
Allen Wrench
Bolt
Allen Wrench
FRONT
(I)
(I)
(I)
DO NOT FULLY TIGHTEN BOLTS
DO NOT FULLY TIGHTEN BOLTS

STEP 6
STEP 5
FRONT
Bolt
Wooden Dowel
Allen Wrench
Screw
(I)
FULLY TIGHTEN ALL BOLTS
FULLY TIGHTEN ALL SCREWS

STEP 8
STEP 7
FRONT
Bolt
Wooden Dowel
Allen Wrench
Screw
(J)
(J)
FULLY TIGHTEN ALL BOLTS
FULLY TIGHTEN ALL SCREWS

STEP 10
STEP 9
(J)
Holder
Screw Screw
Screw
FRONT
FULLY TIGHTEN ALL SCREWS
FULLY TIGHTEN ALL SCREWS