OSP Home Furnishings WORK SMART BTLL2937 User manual

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.ofcestar.net or call or write us.
BTLL2937
WORK SMART®SIT-TO-STAND L-DESK
*PATENT PENDING
January, 2023

LIMITED WARRANTY
OSP Home Furnishings®warrants to the original purchaser that this product will be free from defects in material and workmanship as described
below. Home Furnishings®will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year
from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty
shall be effective for the applicable time period beginning from the date of purchase as shown on your original sales receipt. This warranty is your sole
remedy for product defects and excludes defects due to or arising in connection with product abuseor misuse, use modication of, or attachments to
the product, and products or parts not used, maintained, or installed in accordance with the company’s installation, maintenance and/or applicable
guidelines. There are no other warranties, express or implied, other than those specically described, including without limitation any implied warranty
of merchantability or of tness for a particular purpose. OSP Home Furnishings®will not be responsible for incidental or consequential damages. Some
states do not allow the exclusion or limitation of incidentalor consequential damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specic legal rights and you may also have other rights which may vary from state to state. Our quality standards are among the
highest in the industry. Sometimes, nomatter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do
everything possible to promptly remedy the problem. Contact us via e-mail parts.department@ofcestar.net by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30 p.m. Pacic Time. To make a warranty claim, contact Parts Department.
Provide model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings®will:
(a) Supply compatible components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any
components returned to the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.

(C) Front Left Leg (1 PC)
(A) Desktop (1 PC) (B) Return Desktop (1 PC)
(D) Rear Leg (3 PCS)
Left / Right / Corner
(E) Front Right Leg (1 PC) (F) Rear Center Leg (1 PC)
(G) Rear Desk Stretcher (1 PC) (H) Rear Desk Return Desk Stretcher (1 PC)
(I) Side Stretcher (3 PCS)
PARTS

L57 x 4mm
5/16” x 70mm
5/16” x 16 x 1.8
5/16” x 2mm
1/4” x 30mm
3/16” x 50mm
n/a
n/a
4 x 15mm
n/a
1 PC
12 PCS
16 PCS
16 PCS
4 PCS
10 PCS
2 PCS
3 PCS
3 PCS
3PCS
DRAWINGNO DESCRIPTION SIZE QUANTITY
HARDWARE LIST
Allen Wrench
Bolt
Flat Washer
Lock Washer
Bolt
Screw
Grommet
Clip
Machine Screw
Knob
Phillips screwdriver also needed for assembly (not provided)
1
2
3
4
5
6
7
8
9
10

STEP 1
STEP 2
FULLY TIGHTEN MACHINE SCREW (9)
DO NOT FULLY TIGHTEN BOLTS OR SCREWS

STEP 3
STEP 4
DO NOT FULLY TIGHTEN SCREWS
FULLY TIGHTEN MACHINE SCREW (9) ONLY.
DO NOT FULLY TIGHTEN BOLTS (2).

STEP 5
STEP 6
CAREFULLY TURN TO THE UPRIGHT POSITION. APPLY FIRM PRESSSURE TO ALIGN.
FULLY TIGHTEN ALL SCREWS & BOLTS.
DO NOT FULLY TIGHTEN SCREWS