Osram SYLVANIA SDPF7904-DG User manual

USER MANUAL
ENGLISH
SYLVANIA is aregistered trademark of OSRAM Sylvania Inc. used under license.
SDPF7904-DG

Key Points
This manual includes security measures and correct operating methods. For personal
safety, please make sure to read this manual before using. Thank you!
1. The machine adopts capacitive touch screen, you can just touch it by finger or click with
capacitive pen for operation. (Never use the sharp objects to click the screen, or the touch
screen may be damaged).
2. Do not put the device at any high temperature, high humidity or dusty place.
3. Do not drop or crash the device to prevent the violent impacting between the display and
the capacitive touch screen. Or the customers have to take the consequence by them-
selves.
4. Don’t use the different type charger or it may make the device burned. We assume no
liability for the damage. Please contact with our agent if you need the original adaptor.
5. Do not disconnect the device while formatting, or it may make the error.
Our company won’t bear the duty for the loss of the memory erasing on account of the
damage, repair or some other reason. Please operate the device according to the user
manual rightly and backup the important data in time.
6. Do not dismantle this device by yourself, and do not polish it with alcohol, dilution,
or benzene.
7. Do not use this device where electronics is forbidden, such as on the airplane.
8. Do not use this device while walking and driving, avoiding traffic accident.
9. USB is for connecting u-disk only.
For any support needed for this device please contact the company or the authorized
dis-tributor. Any unauthorized dismantling of the device will make the warranty null and
void.
We reserve the right to keep the change of the products, the specification and design is
subject to change without notice!

4. Micro SD
2. USB
3.RESET
Use a needle or paper clip to reset unit.
5. DC
Connect DC adapter to power on the device.
1. POWER
Load external micro SD memory cards here.
After connecting power adapter, please press and hold power button for approximately 5 seconds
(until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to access reboot or power off
menu. Short press on power button will turn off/onscreen (but leave the photo frame in on position).
Packing contents:
1 photo frame, 1 adapter, 1 stand, 1 screw, 1 user manual
1
1
2
3
4
RESET
USB DC
5
This micro USB port is for uploading photos from USB drive only, it is not for connecting
computer.Connect a USB flash drive with OTG cable (not included). Can import photos from USB
flash driver to photo frame, can’t copy photos from photo frame to USB flash driver, can’t play
photos from USB flash driver directly.

Getting started
Thank you for purchasing your very own frameo.
First, to set up your frame follow the ‘Quick start guide’ included in the package. If you are
new to using frameo then start by following the frameo quick setup on page or follow the on
screen guide when powering it on for the first time.
Once you have set up your Frameo frame, start connecting it to your friends and family.
Frameo app
To send photos to your frame, use the frameo app for iOS or Android
Find the frameo app on:
Google play by searching for “frameo” or scan this QR code
App Store by searching for frameo or scan this QR code
2

Frameo quick setup
When starting your frame for the first time, you will need to setup the frame.
󱕰First you start by selecting a language. This will be the language used throughout
frameo.
󱕰 Connect your frame to the internet by connecting it to a Wi-Fi.
If a newer version of the frameo software is available, then you will be prompted
with an update dialog. It is recommended to update your frame immediately if
prompted.
󱕰Enter your name, and the location where you have placed your frame e.g. “Living
room”, “Kitchen” or “Office” and finally set the timezone if not correct.
Start using frameo
Start by connecting with your friends and family by providing them with a unique code from
your frame.
If you want to be able to send photos to the frame yourself, start by downloading the app for
iOS or Android on App Store or Google Play. Then use the code to connect your frame and
app as described below.
Connecting a new friend:
󱕰Make sure that your friend has downloaded and installed the frameo app
󱕰 Click the add friend icon on your frame . A dialog will appear showing a
unique code which is valid for 12 hours.
󱕰 Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone
call, to your friend.
󱕰Once your friends have added the code in their frameo app, they will automatically
appear on your frame and be able to send you photos.
󱕰Read chapter Change options for a friend to allow connected friends, to
retrieve and share the connection code via the smartphone app.
3

Navigating your frameo
Swipe left or right to go through your photos.
To access the menu, simply tap once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family so they can connect and
send photos to your frame.
Gallery
Opens a gallery which allows for easy and fast navigation through your photos.
Settings
Opens the Settings.
Hide photo
Hides the current photo. This means that the photo will no longer be shown in the slideshow. If
needed the photo can be shown again through the settings menu.
Fit to frame/Fill frame
This toggles how the photo is shown.
The Fill frame option is the default. The photo is scaled so that it fills the whole screen. It will be
centered around what is selected as the most important part. See the first picture below.
Fit to frame will make sure that the entire photo is shown on the screen. See the second picture
below.
4

Adjust photo
The adjust photo feature is only available when the photo is set to fill frame. It allows you to adjust the
position of photo in the frame for an even better fit.
Interacting withvideos
When a video is shown two additional controls are shown. One for play/pause of the video and one
for mute/unmute of the video.
Press to start the video playback. Pressing will pause the video playback.
Pressing will mute the video while pressing will unmute the video.
Power menu
Tap the power icon in the top right corner of the screen to access the power menu. Here you can
power off or restart your frame and make it go into sleep mode.
NB. Make sure to always use the power off button on the device or in the power menu to turn
Frameo off. Never disconnect power when Frameo is running.
5

Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name:
Changes the name of your frame. This is also the name the connected friends and family will
see in their list of connected frames.
Frame location:
Changes the location of your frame. This is the location displayed on your friends' and family's
list of connected frames which can help to distinguish frames from each other.
Set language:
Sets the language throughout your frame.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Set time zone
Sets the timezone that should be used on your frame.
Sleep mode:
frameo offers a sleep mode which turns off the screen to reduce power consumption while
you
e.g. are sleeping. Its default setting is to turn off the screen at 23:00 and turn on the screen
again at 07:00. To change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to receive photos
during sleep mode.
Manage photos
Show/hide photos:
Select which photos to hide by tapping the particular photos you wish to hide. Hidden photos
will NOT be deleted from your frame, you can always select them to be shown again.
Use to hide or show all photos.
6

Delete photos:
Select photos that you want to permanently delete from your frame by tapping the photo. Use
to select or deselect all and to delete the selected photos.
My Friends
This list contains all the people that are allowed to send photos to your frame.
Change options for a friend
Click the options icon to open the friend options menu. From here you can allow/disallow if
a friend may share the code to the frame. If this is enabled the friend can retrieve and share
the code to the frame from his/her app.
From the options menu you can also delete a friend, by pressing the DELETE FRIEND
button. This will remove the friend from the list and thereby remove their permission to send
photos to the frame. You will then be asked to confirm the removal and if you would like to
remove all photos previously received from this friend.
Remove person
To remove a person from this list, thereby removing their permission to send you photos, tap
the delete icon . You will then be asked to confirm the removal and if you would like to
remove all photos received from this person.
Export photos
Allows you to export photos from the frame to external storage (e.g. microSD card).
The export function will export all photos on the frame as well as profile pictures.
Import photos:
Allows you to import photos from an external Micro SD card.
BEFORE YOU TRY TO IMPORT PHOTOS FROM A Micro SD CARD , MAKE SURE YOU HAVE A Micro SD
CARD WITH PHOTOS ON INSERTED INTO YOUR FRAME.
Start by selecting the photos that you want to import onto your frame.
Note:
1. It can not zoom in and out when playing the pictures.
2. When the picture is not in center, please tap the picture then there will appear a dialog,
tap the icon ‘Fit to frame’ to fit the picture to the frame, or tap‘adjust photo’ to move the
picture up and down, and then tap the icon ‘󱆻’ or ‘X’ to confirm the picture in center.
IT IS CURRENTLY NOT POSSIBLE TO ADD A CAPTION OR DEFINE THE MOST IMPORTANT PART OF
THE PHOTO WHEN USING THE IMPORT FUNCTION.ALTERNATIVELY ADD YOURSELF TO YOUR
FRIEND LIST AND SEND THEM USING THE APP.
Once selected tap the import button to start the import process.
7

To allow a new person to send you photos, simply tap the add friend button and share
the presented code in whatever way you prefer.
Display and slideshow
Timer
Define the duration a photo should be displayed.
Show caption
Sets whether or not to display the captions that your friends have sent with the photo. Check
to display captions. Uncheck to hide captions.
Fill frame
Sets the default frame photo setting. Check to set default to fill which makes the photos fit the device
screen according the most important part of the photo. Uncheck to make the photo fit inside the
screen of the device, adding blurred bars on the sides or top/bottom
Photo display order
Sets the order in which your photos are displayed on the frame.
󱕰 By date: Photos are shown newest to latest.
󱕰 Shuffle: Photos are shuffled and shown in a random order.
Brightness level
Adjust the brightness level of the screen.
Notification volume
Adjust the volume level for notification sounds on the frames, e.g. for received new photo
notification.
Autoplay
Enables/disables autoplay of videos in the slideshow. Videos can always be manually started
regardless of this setting.
Video playback
Determines how videos should be played when autoplay is enabled.
󱕰 Loop videos: The video will loop until the slideshow timer is up.
󱕰 Play once: The video will play once and show it’s thumbnail until the timer is up.
Add person
8

●Play once and continue: The video will play once and continue to the next photo,
or video, once it completes.
Playback audio
Sets the default audio playback behaviour of videos in the slideshow to ON or OFF. Audio
can always be manually enabled/disabled regardless of this setting.
Video volume
Adjust the volume level for video sounds on the frames.
Wi-Fi
Set which Wi-Fi the frame should be connected to. If you are connecting to a network with a
captive portal a web browser icon should appear in top right corner of the screen. Use this to
open a browser where you can enter credentials to access the network.
Backup and Restore
Backup frame to max 32GB microSD card.
Tap to make a backup of your photos, friends and settings. The time of latest successful
backup will be displayed.
Any existing backup on the microSD card will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of you receiving new
photos or making changes on your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup is up-to-date.
This is done by confirming the date under “Backup frame to external storage (e.g. microSD
card)”. If e.g. the last backup is too old or if no backup is made, then press the “Backup
frame to external storage (e.g. microSD card)” button to make a new backup.
It is important to note that you cannot restore a backup to a new Frameo frame and keep
the old frame operational at the same time.
If you wish to restore a backup on a frame that has already been setup, then you must first
reset the frame. This is done by pressing the “Reset frame” button. This will delete all data
on the Frameo and reset the Frameo to its setup screen.
On the setup screen you can select the “Restore from backup” button which will restore your
frame according to the backup.
9

Reset frame
Removes all data from your frame. This will permanently remove all your photos,
friends/connections and settings.
About
Check for update
Check if an update is available for your frame.
Beta program
If checked the device will join the Beta program were it will receive updates more frequently and
before normal release devices.
Help
Open source libraries
Opens a list of open source libraries used in the app and their licenses.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously with improving the frameo
software. We understand if you do not wish to share this data with us. Set checked if you
wish to help us improve frameo. Set unchecked to deny the sharing of anonymous
analytics data.
Note:
To connect Wi-Fi after rest, you need to follow below steps:
1. Slightly press the screen,it will show below iamge.Click setting and find Wi-Fi at
setting page
10
If the “Restore from backup” button isn’t visible, then confirm that the external storage
(e.g. microSD card) is correctly mounted.

2. Click Wi-Fi,select Wi-Fi from poped up menu and connect.
11

Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
thereceiver is connec-ted.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
For service assistance and product information, please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com
Product Specification
OS
Android 6.0
CPU
RAM Memory
512MB DDRIII
CPU Type: Rockchip 3126
Memory 8GB EMMC
Resolution 1 024 x600 TN Pixels
Touch Panel 5 Point Capacitive touch screen
Wi-Fi 802.11 b/g/N
Photo format JPEG &PNG
TM
Specifications are for reference
Video format MP4(within 15 seconds)
12

To make a warranty claim, do not return this product to the store. Please
email [e-mail] or call 1-800-968-9853.
90 day Year Warranty
This product is warranted to be free from defects in material and workmanship for
a period of ninety (90) days from the date of original purchase. During this period,
your exclusive remedy is repair or replacement of this product or component found to
be defective, at our option; however, you are responsible for all costs associated
with returning the product to us. If the product or component is no longer available,
we will replace with a similar one of equal or greater value. Prior to a replacement
being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conform-
ity with the printed directions., or damage to the product resulting from accident, altera-
tion, abuse, or misuse. This warranty extends only to the original consumer purchaser
or gift recipient. Keep the original sales receipt, as proof of purchase is required to
make a warranty claim. This warranty is void if the product is used for other than
single-family household use or subjected to any voltage and waveform other than as
on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused
by breach of express or implied warranty. All liability is limited to the amount of
the purchase price. Every implied warranty, including any statutory warranty or condition of
merchantability or fitness for a particular purpose, is disclaimed except to the extent prohib-
ited by law, in which case such warranty or condition is limited to the duration of this written
warranty. This warranty gives you specific legal rights. You may have other legal rights
that vary depending on where you live. Some states or provinces do not allow lim-
itations on implied warranties or special, incidental, or consequential damages, so the
foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
13