Otto OTFRAN2MBB User manual

FRANKLIN MEDIUM BACK CHAIR
OTFRAN2MBB/OTFRAN2MBW
1/8
Weight capacity:120kg
ASSEMBLY INSTRUCTIONS
1 CTN
thgirypocottcejbussitelkoobnoitcurtsni&ngisedsihT

Furniture Assembly Instructions S
tyle Guide
2/ 2
Estimated Assembly Time: 20 minutes
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.
2/8

3/8
CHILDREN MUST BE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact 1300 OFFICE.
•Please contact Mister Fixit for spare or missing keys at [email protected] or call
1800 234 800
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•

4/8
Parst List
Hardware List
AX5
AX5
HWFRAN2CA HWFRAN2GL HWFRAN2BS HWFRAN2ARW HWFRAN2ARB
DX1
GX2 HX2 IX2 JX4 KX1
EX1 FX2
FX2 FX2
BX1 CX1
CX1
M8X55mm M8X50mm M8X16mm M8
Hardware Spare Parts number - HWFRAN2HW
Spare Parts number -
EX1

Step 1
Step 2
J
E
D
J*4
5/8
K*1
C
B
A
Do not tighten screws fully until you have completed assembly.

Step 3
Step 4
G*2
G
H
H
G
G
F(R)
F(L)
H*2 I*2
6/8
K*1
I
I
Do not tighten screws fully until you have completed assembly.

7/7
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
To lower chair height sit fully into
the chair & pull lever upward.
Chair Height Adjustment
Release lever at desired height.
Your feet should be resting flat on
the floor.
While seated, reach under the right side of the
chair
to find the height adjustment handle.
Pull the handle all the way out (away from the
g
as
l
ift)
to allow chair to tilt back or forth. To lock the chair
in the upright or vertical position, sit upright & push
the handle in towards the gas lift.
Chair Tilt
Adjustable Tilt Tension Control
Turn continupusly to adjust how
quickly chair tilts back & forth.
Note: if adjusting while sitting in chair
Turn knob left to tighten tension.
Turn knob right to loosen tension.
Care Instructions-PU Chairs
Clean, check & tighten all parts regularly.
Treat spills immediately with an absorbent cloth by blotting the spill.
Wipe with a damp cloth & mild soap. Wipe dry immediately with an absorbent dry cloth.
Do not use detergents, solvents or abrasive cleaners.
Aviod contact with skin, in particular during high temperatures & humidity.
7/8

8/8
Thank you for your purchase. Please retain your receipt to validate warranty. If you would like
to know more about our furniture products,
please visit www.officeworks.com.au
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
•
To cosmetic damage;
To damage caused by consumables used in connection with the product (such as
•
cleaning products);
Where the product has not been used in accordance with all provided instructions;
•
To damage arising from fair wear and tear;
•
Where the product has not been subject to reasonable use;
•
Where the product has been intentionally or negligently damaged; and/or
•
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.