Outdoor Gourmet SRCPS20001 Owner's manual

Assembly Instructions & User’s Manual
Outdoor Cooking Prep Station
Item# 163868
Model# SRCPS20001
Please keep this instruction manual for future reference
Customer Service: [phone] 7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [email protected]
(Made in China)
READ INSTRUCTION MANUAL BEFORE ATTEMPTING TO ASSEMBLE OR
OPERATE THIS PRODUCT.
Adult assembly required.
Keep screws and parts out of reach of children.
Customer Service: [phone], 7:30 am to 4:30 pm PST, Monday - Friday
Warning:
--------------------------------------OR-------------------------------------
QA gh 01/19/21
Product not available when manual was reviewed
Joe Oakes
1/19/21
PS NB 1/20/21

Exploded View ......................................................................................................................................... .....2
Parts and Tools ……............................................................................................................……...............3-4
Note: Before beginning assembly of product, make sure all parts are present.
Compare parts with package content list and hardware contents. If any part is missing
or damaged, do not attempt to assemble the unit. Contact customer service for
replacement parts.
Assembly Instructions……….......................................................................................................
..5-14
Care & Maintenance..…...…………………......................................................................................
.....14
Warranty Information ………..………...........................................................................................................
15
TABLE OF CONTENTS
1
Parts, Tools and Hardware

Please check the contents of the packaging to ensure all parts are included. If missing parts please
contact customer service.
EXPLODED VIEW
2

1
2
3
4
5
6
7
8
10
11
9
1
1
1
1
1
1
1
1
2
2
1
1
2
4
1
Part # QtyDescription
Tabletop
Assembly
Sink Left Panel
Faucet Assembly
Drainage Hose
Sink Drain
with Strainer
Side Handle
Sink Rear Panel
Sink Right Panel
Sink Front Panel
Spigot
Spigot Nut
12 Bottle Opener
14 Door Handle
15 Door Handle Base
13 Cabinet Left Door
Picture
PART LIST
16
17
18
19
20
21
22
23
25
26
24
1
1
1
1
1
2
1
1
1
1
1
1
2
2
1
Part # QtyDescription
Cabinet Left
Panel
Door Bottom
Magnet
Cabinet Bottom
Panel
Cabinet Right
Door
Dust Panel
Door Upper
Magnet
Cabinet Upper
Panel
Cabinet Right
Panel
Cylinder Hole
Cover
Cabinet Rear
Panel
Paper Towel
Holder
27 Cabinet Middle
Panel
29 Locking Caster
30 Non-locking
31 Door Shaft
Caster
28 Trash Can
Retainer
Picture
3
4

TOOLS REQUIRED
AA
BB
CC
DD
EE
24
6
38
5
4
M6 x 10 Bolt
M6 x 30 Bolt
M5 x 10 Bolt
M5 x 12 SS Bolt
M4 x 10 Bolt
FF 2
M4 x 10 Stepped Bolt
Hardware # Description Picture Qty
HARDWARE
Phillips Head Screwdriver
(Not included)
Adjustable Wrench
(Not included)
4

STEP 1
Attach the cabinet bottom panel (#18) to the
cabinet left panel (#16) and cabinet right panel
(#23) with (6) M6 x 30 bolts (BB). Screw (2)
locking casters (#29) to the cabinet left panel
(#16) and (2) non-locking casters (#30) to the
cabinet right panel (#23) as illustrated.
Choose a good, cleared assembly area and get a friend to help you put the unit together. Lay
cardboard down to protect the unit finish and assembly area.
ASSEMBLY INSTRUCTIONS
1
16
29
30
18
23
BB
AA
AA CC
CC
16
CC
BB x6
M6 x 30 Bolt
Hardware Used
STEP 2
Attach the cabinet rear panel (#25) to the
cabinet left panel (#16) and cabinet right panel
(#23) with (6) M6 x 10 bolts (AA), then attach
the cabinet rear panel (#25) to the cabinet
bottom panel (#18) with (3) M5 x 10 bolts (CC)
as illustrated.
Note: DO NOT TIGHTEN hardware until the
tabletop assembly has been installed in Step 10.
2
AA x6
M6 x 10 Bolt
Hardware Used
CC x3
M5 x 10 Bolt
AA 25
23
18
5

STEP 3
Attach (2) spigots (#10) to the cabinet rear
panel (#25) with (2) spigot nuts (#11). Attach
the door bottom magnet (#17) to the cabinet
bottom panel (#18) with (2) M5 x10 bolts (CC).
Place the cylinder hole cover (#24) to the
location hole directly as illustrated.
ASSEMBLY INSTRUCTIONS
3
CC
17
24
11
10
Hardware Used
STEP 4
Attach the cabinet middle panel (#27) to the
cabinet bottom panel (#18) with (3) M5 x 10
bolts (CC) as illustrated.
4
Hardware Used
25
18
27
CC
CC x2
M5 x 10 Bolt
CC x3
M5 x 10 Bolt
18
6

STEP 5
Attach the dust panel (#20) to the cabinet left
panel (#16) and cabinet middle panel (#27) with
(4) M5 x 10 bolts (CC) as illustrated.
Note: DO NOT TIGHTEN hardware until the
tabletop assembly has been installed in Step 10.
ASSEMBLY INSTRUCTIONS
5
20
CC
Hardware Used
STEP 6
Attach the cabinet upper panel (#22) to the
cabinet left panel (#16) and cabinet right panel
(#23) with (4) M6 x 10 bolts (AA). Then attach
the cabinet upper panel (#22) to the cabinet rear
panel (#25) and cabinet middle panel (#27) with
(7) M5 x 10 bolts (CC).
Screw the door shafts (#31) to the cabinet left
door (#13) and cabinet right door (#19) as
illustrated. Then insert the lower door shaft of
cabinet left door (#13) into the cabinet bottom
panel mounting hole, then insert the upper door
shaft into the cabinet upper panel mounting hole
as illustrated. Repeat the same procedures to
assemble the cabinet right door (#19).
Note: DO NOT TIGHTEN hardware until the
tabletop assembly has been installed in Step 10.
6
Hardware Used
CC x4
M5 x 10 Bolt
27
AA
AA
CC
13
19 31
19
13
22
16
AA x4
M6 x 10 Bolt
CC x7
M5 x 10 Bolt
16 23
27
7

EE x4
M4 x 10 Bolt
FF x2
M4 x 10 Stepped Bolt
STEP 7
Attach the door handles (#14) and door handle
bases (#15) to the cabinet left door (#13) and
cabinet right door (#19) with (4) M4 x 10 bolts
(EE). Attach the trash can retainer (#28) to the
cabinet left door (#13) with (2) M4 x 10 stepped
bolts (FF) as illustrated.
ASSEMBLY INSTRUCTIONS
7
Adjustable up and down
14
15
28
EE
FF
Hardware Used
STEP 8
Attach the sink left panel (#2) to the cabinet
assembly with (4) M5 x 10 bolts (CC). Attach
(2) door upper magnets (#21) to the cabinet
upper panel (#22) with (4) M5 x 10 bolts (CC)
as illustrated.
8
13
16
22
19
CC
CC
2
21
Hardware Used
CC x8
M5 x 10 Bolt
8

STEP 9
Attach the sink right panel (#8) and sink front
panel (#9) to the cabinet assembly with (7)
M5 x 10 bolts (CC) as illustrated.
ASSEMBLY INSTRUCTIONS
9
STEP 10
Attach the tabletop assembly (#1) to the
cabinet assembly with (8) M6 x 10 bolts (AA)
as illustrated.
Note: Now TIGHTEN ALL hardware.
10
AA x8
M6 x 10 Bolt
Hardware Used
Hardware Used
CC x7
M5 x 10 Bolt
CC
89
1
AA
9

6
AA
DD
DD
26
12
DD x2
M5 x 12 SS Bolt
AA x6
M6 x 10 Bolt
Hardware Used
STEP 11
Attach the side handle (#6) to the cabinet
assembly with (6) M6 x 10 bolts (AA).
Attach the bottle opener (#12) to the cabinet
assembly with (2) M5 x 12 SS bolts (DD) as
illustrated.
ASSEMBLY INSTRUCTIONS
11
STEP 12
Attach the paper towel holder (#26) to the
cabinet assembly with (3) M5 x 12 SS bolts
(DD) as illustrated.
12
DD x3
M5 x 12 SS Bolt
Hardware Used
10

3
Plastic Washer
Fixing Nut
Washer
STEP 13
Take the faucet assembly (#3) out of the box,
then insert the faucet into the mounting hole
on the tabletop by screwing it tightly with the
fixing nut and washers as illustrated.
ASSEMBLY INSTRUCTIONS
13
STEP 14
Connect the water pipes to the faucet by
using the wrench (not included) to tighten
as illustrated.
14
Fixing Nut
Hot-water inlet / Cold-water inlet
Hot water
pipe/1 pc
RED BLUE
Cold water
pipe/1 pc
Hot and cold water mixing pipe
1. Hold down the button.
2. Insert the water pipe completely
then release the button.
Tighten the water pipes
counter clockwise.
11

Connect the cold
water pipe to the spigot.
The faucet is expandable.
Rotate 360 degrees freely.
5
Connect the hot
water pipe to the spigot.
STEP 15
Connect the hot/cold water pipe to the spigots
assembled in Step 3.
Unscrew the pre-assembled bolts on the
counterweight, then attach the counterweight to
the hot and cold water mixing pipe and adjust
its position as needed, finally screw the bolts
tightly as illustrated.
Note: Use plumbers tape/teflon tape to seal
the connection between the pipes and spigots
to prevent leak if available.
ASSEMBLY INSTRUCTIONS
15
STEP 16
Insert the sink drain with strainer (#5) to the
bottom of sink as illustrated.
Note: Use plumbers putty to seal the connection
between the sink and sink drain to prevent leak
if available.
16
12

Tighten the drainage hose.
Place the drainage
hose route through
the back of cabinet.
4
7
CC
STEP 17
Screw the drainage hose (#4) to the sink
drain on the bottom of sink tightly, then feed
the drainage hose through the upper panel of
cabinet assembly, and route through the back
of the cabinet.
ASSEMBLY INSTRUCTIONS
17
STEP 18
Attach the sink rear panel (#7) to the cabinet
assembly with (4) M5 x 10 bolts (CC) as
illustrated.
18
Hardware Used
CC x4
M5 x 10 Bolt
13

STEP 19
Cooking Prep Station
(Assembled)
STAINLESS STEEL SURFACE
Under extreme conditions, stainless steel can rust and the rust may not be removable.
These conditions may become more prevalent in coastal areas. Always use extra precautions
while cleaning the stainless steel using a soft non-abrasive cloth and a stainless steel cleaner/polish
to minimize the risk of scratching the surface.
PAINTED SURFACES
Wash with mild detergent or nonabrasive cleaner and warm soapy water. Wipe dry with a soft
nonabrasive cloth.
If rust appears on the surface of your cooking prep station, clean and buff the affected area with
steel wool or fine grit emery cloth.
Touch-up with a high quality outdoor/exterior paint.
To protect against excessive rust, keep all components clean and completely dry and the cooking
prep station covered at all times when not in use.
Store assembled in a location away from children and pets.
ASSEMBLY INSTRUCTIONS
CARE & MAINTENANCE
19
14

WARRANTY INFORMATION
Need help?
call our toll free number at:
1 (888)-922-2336
1 (888)-909-3888 or
e-mail us at:
[email protected]
This appliance has been manufactured under the highest standard of quality and workmanship. We
warrant to the original consumer purchaser that all aspects of this product will be free of defects in
material and workmanship for one (1) year from the date of purchase. A replacement for any
defective part will be supplied free of charge for installation by the consumer. Defects or damage
caused by the use of other than genuine parts are not covered by this warranty. This warranty shall
be effective from the date of purchase as shown in the purchaser’s receipt.
This warranty is valid for the original consumer purchaser only and excludes industrial, commercial
or business use of the product, product damage due to shipment or failure which results from
alteration, product abuse, or product misuse, whether performed by a contractor, service company,
or consumer. We will not be responsible for labor charges and/or damage incurred in installation,
repair or replacement, nor for incidental or consequential damage.
15