Outdoor Tech Big Turtle Shell User manual

BIG TURTLE SHELL®
RUGGED WIRELESS BOOMBOX
By Outdoor Tech®
·HI–FI SOUND ·
·BUILT IN POWERBANK ·

Welcome to total sonic freedom.

outdoortech.com

SHELL ANATOMY
POWER UP
PAIR
WIRED
POWERBANK
LISTEN & TALK
SPECIFICATIONS
FAQ
1
4
5
7
8
9
12
13
CONTENTS

ANATOMY
Power Button
Multifunction Button (MFB)
Press once to Play/Pause OR Answer/Hang up.
Hold down for 4 seconds to enter pairing mode.
Volume/Track Control
Raise volume by pressing >>
Lower volume by pressing <<
Skip forward by holding >> for 2 seconds
Skip backward by holding << for 2 seconds
1

ANATOMY
3.5mm Audio Input/Output
Big Turtle Shell®Charge Port
USB Device Charge Port
Built in Microphone
2

ANATOMY
Grab Handles/ Mounting Bars
Strap them to your bike and them on a stroll or
hold two on each hand and have them play anywhere!
Passive Bass Port
3

For best audio experience, fully charge your Big Turtle Shell®before use.
*NOTE: It takes about 3 hours to fully charge the Big Turtle Shell.
Power On: Press & hold the power button.
*The speaker will prompt "Charge me."
Indicator Light
Flashes RED
RED Light
No Light
Status
Low Battery*
Charging
Charged
LED Light Indicator
4
POWER
Double click the power button to hear battery prompt.
The Big Turtle Shell®will power off when idle and not connected to any devices.

PAIR
Pair the rst device
Power on Big Turtle Shell®then it will in the pairing mode.
Use your device to search for the "ODT Big Turtle Shell®"
when successfully paired the Big Turtle Shell®will prompt "Successful"
Pair the second device
Press << and >> simultaneously for 3 seconds - prompting "pairing."
after successfully pairing with second device, reconnect the rst device by hand then the
second device will be successfully paired simultaneously.
*NOTE: The Big Turtle Shell®may be connected to 2 Bluetooth enabled devices simultaneously.
5