Outdoor Tech TURTLE SHELL 3.0 User manual

TURTLE SHELL®3.0

Hi.

Good call on picking up the Outdoor
Tech®Turtle Shell®3.0 wireless boom
box. Your experience of the universe
will soon be enhanced wirelessly and
powerfully. This manual exists to help
make sure that you use it correctly, so
you’re denitely going to want to relax
for a hot second and look through this.
Kisses,

ANATOMY
Power On / Power Off
Multi Function Button
Skip Backward / Volume Down
Skip Forward / Volume Up
Micro USB Charge Port / 3.5 mm Aux Port
USB Output Charge Port
Microphone
Light Indicator

Power On / Power Off
Multi Function Button
Skip Backward / Volume Down
Skip Forward / Volume Up
Micro USB Charge Port / 3.5 mm Aux Port
USB Output Charge Port
Microphone
Light Indicator
POWER UP
TO CHARGE
For best results, fully charge your Turtle Shell®
3.0 before use!
1. Connect the included MIcro USB cord to a
power source and the charging port on the
Turtle Shell®3.0. When charging, the red LED
light will stay activated. ***Full charge time
is about 4-5 hours.
2. When the Turtle Shell®3.0 is fully charged,
the RED light will turn off.
The displayed battery meter is supported for
Apple products.
*The Turtle Shell®3.0’s Bluetooth and music
functions can still operate while charging.

MUSIC FUNCTIONS
Music / Device Controls
MFB
Skip backward
Volume down
Skip forward
Volume up
FUNCTION BUTTON ACTION
Power on Press 3 sec
Power off Press 2 sec
Pairing mode Hold 3 sec
Manual pairing
mode
Hold for 3 sec
Play / Pause Short press once
Volume up Short press once
Volume down Short press once
Skip forward Press & hold for
2 sec
Skip backward Press & hold for
2 sec

PHONE FUNCTIONS
Device Controls
FUNCTION BUTTON ACTION
Answer an
incoming call
Short press once
Reject an
incoming call
Press & hold for
2 sec
End call Short press once
Siri/Voice
activation
Press & hold for 2
sec & release
MFB
Skip backward
Volume down
Skip forward
Volume up

PAIRING TO DEVICE
Enter Pairing Mode
When powered on hold the “+” and “-” at the
simultaneously for 2-3 seconds or until you see the
LED light flash blue 3 times and the voice prompt
states “Pairing.”
Pairing Turtle Shell 3.0 to Device
Open the Bluetooth settings on your device. If you
have put your Turtle Shell®3.0 into pairing mode,
it should be listed as “ODT Turtle Shell®3.0” as an
available device to pair. Connect with the Turtle
Shell®3.0 and enter “0000” if prompted. The voice
prompt will state “Successful” if the Turtle Shell 3.0
and your device connect.
Power On / Off
ON: Hold the Power Button for 2-3 seconds or until
the LED light flashes blue and the voice prompt
states “Power on”
OFF: Hold the Power Button for 3-4 seconds or
until the LED light flashes red and the voice prompt
states “Power off”

SPEAKER TO SPEAKER PAIRING
STEP ONE
Turn on TS3 #1 and wait till the voice prompt states
that the speaker is on. Then press & hold simulta-
neously the MFB button and the “+” button. TS3 #1
will then state that it is in pairing mode.
TS3 #1 TS3 #2
STEP TWO
Turn on TS3 #2 and wait till the voice prompt states
that the speaker is on. Then press & hold simulta-
neously the MFB button and the “-” button. TS3 #2
will then state that it is in pairing mode.
STEP THREE
Once TS3 #1 and TS3#2 are connected, the voice
prompt will state “Successful.”
For more functions, go to outdoortech.com/apps/
to download the Outdoor Tech app.

LISTEN CONTINUED
The built-in microphone means that the Turtle
Shell 3.0 can be used as a wireless headset.
*NOTE: The built-in microphone only works when
connected via Bluetooth.
The following are tips on how to use your Turtle Shell 3.0
to speak on the telephone:
Answer a call......... Press the multifunction button.
End a call............... Press the multifunction button.
Decline a call......... Press and hold the multifuntion
button for two seconds.
Make a call............ Use your phone to dial as usual.
Listen and talk through the
Turtle Shell®3.0.
Mute...................... Hold the >> and << buttons for 2
seconds, or until you hear a beep.