Ouvis V5 Smart Home User manual

Quick Start Guide
1/ 10
Quick Start Guide
Ouvis V5 Smart Home
HD Wireless Security Camera
With Temperature and Humidity Sensor
V 1.1
2017-06-15

Quick Start Guide
2/ 10
1.About camera
1.1 Product List：
IP camera*1 Bracket*1
Power adapter*1 Screws bag*1
Software disk*1 User manual*1
Temperature and Humidity Sensor * 1
Ethernet Cable * 1
1.2 Interface.
Micro SD Card Slot
Reset
LAN
Power
Temperature and
Humidity Sensor

Quick Start Guide
3/ 10
2.Connect camera to your router
2.1 Plug the camera into the electric power outlet, and connect one
end of the Ethernet cable in one of the LAN ports of the router, and
the other end in the back of the camera.
3. Camera will self test for one minute, the indicator light in front of
the camera will turn green. If the indicator light blinks, it means
the cable network does not pass, please check the router.

Quick Start Guide
4/ 10
Indicator light
4.View via smart phone
3.1 Download “CamHi” from Google Play Store / Apple App Store or
scan the QR code below to get APP information.
Android IOS
3.2 Run APP and add the camera, make sure your phone is already
connected to your WIFI then follow the steps below.

Quick Start Guide
5/ 10
3.3 View via smart phone.
Click on “Add
Camera”
Click “Search
camera from LAN”
to search all online
cameras in LAN
Click the device
ID you want to
add
1. Input the
default password
“admin”
You should now see
the camera will
show “Online”
2. Click
“Done”

Quick Start Guide
6/ 10
4. Wi-Fi Connection Settings
5.1 Configure the Wi-Fi connection of the camera on smart phone
You can find the installation files
and instructions on the CD-ROM!
The temperature
and humidity
will show up here
Click on the picture
frame to the left of
“Camera Online”, and
you will be on full screen
and watching live video.
By swiping the
screen in all
directions, you
will be able to
move the head
of the camera.

Quick Start Guide
7/ 10
Camera will switch to WIFI connection mode automatically
when network cable unplug
Click here go to
the “Camera
Setting”page
Click on
“Wi-Fi Setting”
From the network
list, click on the
same exact
network that your
smartphone is
connected to
You must input
the correct Wi-Fi
password of your
Wi-Fi network

Quick Start Guide
8/ 10
5. Micro SD Card Recording Settings
6.1 Alarm recording settings on smart phone.
6.2 Set timer recording on phone.
1. Open the
“Motion Detection”
2. Open the
“alarm SD rec”

Quick Start Guide
9/ 10
6.3 For more alarm recording settings, please visit our support
website.
6. Reset and restore factory settings
7.1 Press and hold reset button for 5 seconds, then the camera will
reset to factory defaults.
Check the TF
card is available
Reset Button
1. Open here
and set record
timer

Quick Start Guide
10 / 10
7. More info
IF YOU MEET ANY PROBLEM DURING INSTALLATION OR WANT TO
USE THE CAMERA WITH PC, YOU CAN FIND RELATIVE
TROUBLESHOOTING INSTRUCTIONS AND MANUALS ON
SUPPORT.OUVIS.ONLINE , YOU CAN ALSO POST ONE CASE ON THE
SUPPORT WEBSITE OR YOU CAN CONTACT US VIA SUPPORT EMAIL:
[e-mail]