Oxford 203082 User manual

Assembly Instructions
We have designed our furniture with you,the customer in mind.Our clear,easy to follow
step by step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of
furniture that will go together smoothly and give years of enjoyment.
Please do not return to the store
Broken or missing Hardware?
Co ffee Table
Need help with Assembly?
If you have any questions just call or email us.

12 x Wood Dowel(A) 8 x Bolt(B) 8 x Lock Nut(C) 12 x Cam Bolt(D)
*Special Note：We recommend the use of a hand held screwdriver to avoid the stripping of screw heads.*
8 x Stickers(E) 12 x Cam Lock(F)
Assembling the unit with cams.
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
Page 2 of 5
Top Panel
1
Support Bar
5
Support Bar
5
Support Bar
5
Support Bar
5
Bottom Panel
2
Left Panel
3
Right Panel
4

Step 1
6 X (D)
Step 3
4 X
(B)
4 X
(C)
(B)
(C)
Step 2
8 X
(A)
NOTE:
Assemble console on carpet or
other soft surface to avoid scratching.
*Make sure threads of Lock Nuts(C) 1.Carefully connect left panel to Support Bar and bottom
face Bolt (B) entrance.* Panel using Bolts (B) and Lock Nuts (C).
6 X (F)
(D)
(F)
(F)
(F)
(D)
(D)
(D)
(D)
(D)
(F)
(F)
(F)
(F)
(D)
2
5
5
1.Screw Cam Bolts(D)
into Bottom Panel .
2.Insert Cam Locks(F)
into 2 Support Bars .
3.Connect Support Bars to Bottom Panel by gently tightening
Cam Locks(F).
5
2
52
34
1.Insert Wood Dowels (A) into Left Panel and Right Panel .
4
3
*Note:Use extreme care when handing Support Bars during assembly
to avoid breakage.
Page 3 of 5
35
2
5
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(B)
(B)
(B)
(C)
(C)
(C)
3
2
5
5
(C)
(B)

Step 6
Step 4
4 X
(B)
4 X
(C)
(B)
(C)
(A)
(A)
(A)
(A)
(A)
1
Step 5
4 X
(A)
(F)
(D)
6 x (F)
1.Repeat Step 3 using Right Panel .
4
6 X (D)
1.Insert Wood Dowels (A) and Screw Cam Bolts (D) into Top Panel .
1
(D)
(D)
(D)
(D)
(D)
(D)
Page 4 of 5
1.Connect assembly to Top Panel
using Cam Locks (F).
*Be advised there are 3 Cam Locks (F)
on opposite side not visible on disgram.*
1
3
5
2
4
(B)
(B)
(B)
(B)
(C)
(C)
(C)
(C)
(F)
(F) (F)
(F)

Step 7
8 X (E)
1.If desired，place Stickers (E) over screw holes.
2.Enjoy.
Page 5 of 5
(E)
(E)
(E)
(E)
(E)
(E)
(E)
(E)