Oypla GARDEN 4139 User manual

3 Tier Flower Fountain
User Manual
USER MANUAL Model No: 4139

•Make sure all fastenings are tightly in place and that everything is in order before using
the product. This should be checked periodically by an adult.
•Unpacking, installing and fixing the parts are to be completed by an adult.
•This product is intended for outdoor use only.
•This product contains small parts that could be a choking hazard if swallowed. Keep these
items away from children.
•This product is not a toy, and is only to be used for its designated purpose.
•Only use this product on stable and level ground.
•Do not discard any of the packaging until you have checked that you have all of the parts
and fitting required.
•Leaving the product outside exposed to weather, especially direct sun and rain, will speed
the weathering process. This can be prevented by removing the product form these harsh
conditions.
•If the product is damaged or has any defects, please contact [e-mail]
PART
QUANTITY
PART
QUANTITY
1. Stand (fluted)
1
2. Stand
1
3. Bowl (large)
1
4. Pole with holes at both ends
1
5. Coco liner (large)
1
6. Bowl (medium)
1
7. Pole with a nut inside at one end
1
8. Coco liner (medium)
1
9. Bowl (small)
1
10. Coco liner (small)
1
11. Screw (small)
2
12. Screw and nut (medium)
2
13. Screw and nut (large)
1
USER MANUAL Model No: 4139
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.

1. Place the stand fluted section (1) on a firm and level base for a central upright completion
and ease of assembly. Attach to the stand (2) with a small screw (11) on the bottom, then
secure at the top with a large screw and nut (13).
2. Place the large bowl (3) onto the stand pole and place the pole (4) through the centre of the
bowl with the coco liner (5) inside. Ensure the three poles are aligned and use a medium
screw and nut (12) to secure them.
3. Repeat this process with the medium bowl (6) and coco liner (8) using the final long pole (7)
and the medium screw and nut.
4. Take the second small screw and place through the centre of the small bowl (9) into the hole
of the pole. Place the small coco liner (10) on the top to finish the assembly.
Assembly Instructions
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4139