7 8
Safety Net
Step 1
Lay the trampoline safety net down on the
trampoline, ready to insert the safety poles.
Tip: Line the net up with leg of the trampoline
you wish to have the safety net positioned.
Step 2
Gather and join all of your safety poles together.
These parts come in two pieces and click together
as pictured. Please ensure that the pole padding
and pole caps are in place.
Tip: If you are having trouble, gently tap the pole
(black end cap) on the ground to ensure the
piece ts together securely.
Step 4
Beginning with the sleeve closest to the zip
opening, insert the pole into the net sleeve
one at a time.
Tip: When inserting the pole, hold the pole and
padding together to ensure the padding doesn’t
slide down for easy insert.
Step 5
Once inserted, stand the pole up and clamp the
pole to the U-Shaped leg, noting that the rounder
edge of the clamp should face outwards.
Each pole must be clamped with two clamps
at the top and base of the pole as pictured.
Tip: As you attach both clamps take care to
ensure they are aligned with one another to
avoid warping the safety poles.
Step 3
Once all poles are connected, lean them on the
trampoline at the points where the corresponding
U-shaped legs are.
Tip: To streamline your assembly, lay the
two safety pole clamps at the base of each
U-Shaped leg for easy access when assembling.
Safety Pads
Step 1
Lay your safety trampoline pads around the
edges of your trampoline, ensuring the black
loops are facing down
Step 2
Place the pad tie through the black loop on
the pads.
Step 4
Repeat this process and proceed around the
trampoline, folding down the side ap of the
pads to ensure the frame is now covered.
Safety Pads: Finished Stage
Your trampoline will now look similar to the picture
with attached safety pads.
Great job.
Step 3
Loop the tie around the frame and loop the white
head through the other end of the tie to secure it
to the frame.
