Ozaas IPC User manual

I
Your Intelligent World
USER MANUAL
Ozaas IPC
User Manual Version: V8.1.4.3
Download the free Ozaas Eye
app and access your cameras
from anywhere.

User Manual of Ozaas Network Camera V8.1.4.3
2
Statement
Thank you for purchasing our product. If there are any questions or requests, please do not
hesitate to contact us.
This manual applies to Ozaas Network Camera.
This manual may contain several technical incorrect places or printing errors, and the content
is subject to change without notice. The updates will be added to the new version of this
manual. We will readily improve or update the products or procedures described in the
manual. Legal Disclaimer
Should any reasons below cause the product destroyed or service stop, we will assume
no responsibility for your or third party’s personal injury and property loss: ①No
installation or use according to instruction strictly. ②For sake of state-building
maintenance or public interest. ③Cases of force majeure. ④Your personal or third
party reasons. (Include no limitation use of third party’s products, software or
components)
Our company has never guaranteed the products for improper or illegal purposes and
uses. This product cannot be used as medical & safety devices or other applications that
will cause danger or injury. And loss or responsibility caused by above uses, you must
bear it by yourself.
With correct installation and use, this product can detect the illegal intrusion, but it
cannot avoid accidents and personal injury or property damage due to these accidents.
Please be on the alert in your daily life, reinforce your safety awareness.
Our company assumes no responsibility for any indirect or occasional or special or
punitive damages, request, property damage or any loss of data or file. Within the max
scope of law allowed, our company’s compensation is no more than the products
amount you paid. Safety Instruction
This manual is intended to ensure that user can use the product properly without danger or
any property loss. Please read it carefully and take care of it for further reference. Precaution
measures are divided into “warnings” and “cautions” as below:
Warnings: Neglecting any of the warnings may cause death or serious injury.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.

User Manual of Ozaas Network Camera V8.1.4.3
3
Warning
Electrical safety regulations of the nation and the region must be strictly followed during
installation or use.
Please use the matched power adapter from standard company.
Do not connect multiple IPCs with one single power adapter (Overload for adapter may
lead to over-heat or fire hazard.
Shut down the power while connecting or dismounting the device. Do not operate with
power on.
The device should be firmly fixed when installed onto the wall or beneath the ceiling.
Shut down the power and unplug the power cable immediately when there is smoke,
odor or noise rising from the IPC. Then contact the dealer or service center.
Please contact the local dealer or latest service center when IPC works abnormally. Do
not attempt to disassemble or modify the device yourself. (We shall shoulder no
responsibility for problems caused by unauthorized repair or maintenance.
Cautions
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is being
used, make sure that the surface of the sensor not be exposed to the laser beam.
Do not place the camera in extremely hot, cold temperatures (the operating temperature
should be between -30°C ~ 60°C), dusty or damp environment, and do not expose it to
high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
Keep the camera away from water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion. Please
use the manufacturer recommended battery type.

User Manual of Ozaas Network Camera V8.1.4.3
4
Table of Contents
STATEMENT .............................................................................................................................................2
CHAPTER 1 PRODUCT INTRODUCTION.....................................................................................................5
1.1 PRODUCT MANUAL............................................................................................................................6
1.2 PRODUCT FEATURES...........................................................................................................................6
CHAPTER 2 OPERATING INSTRUCTIONS ...................................................................................................7
2.1 NETWORK CONNECTION....................................................................................................................7
2.1.1 WIRED NETWORK CONNECTION .................................................................................................................7
2.1.2 WIRELESS INTERNET ACCESS ......................................................................................................................7
2.2 DETECTING AND CHANGING THE IP ADDRESS ....................................................................................8
2.3 SETTING THE OZAAS NETWORK CAMERA OVER THE WAN .................................................................9
2.3.1 STATIC IP CONNECTION ............................................................................................................................9
2.3.2 DYNAMIC IP CONNECTION........................................................................................................................9
CHAPTER 3 ACCESS TO THE IPC BY CLIENT SOFTWARE ...........................................................................11
CHAPTER 4 ACCESS TO THE IPC BY WEB CLIENT .....................................................................................12
4.1 PREPARATION BEFORE INSTALL PLUGIN ...........................................................................................12
4.2 INSTALL THE HSWEBPLUGIN.EXE CONTROLS ....................................................................................12
4.3. INTERFACE OPERATIONS AND USAGE:.............................................................................................16
4.3.1 LOGIN.................................................................................................................................................16
4.3.2 CHANGE PASSWORD ..............................................................................................................................16
4.3.3 EXIT SYSTEM ........................................................................................................................................18
4.4 MAIN INTERFACE DESCRIPTION .......................................................................................................18
CHAPTER 5 LIVE PREVIEW......................................................................................................................18
5.1 LIVE PREVIEW ..................................................................................................................................18
5.2 CAMERA SETTINGS PTZ, ZOOM, CRUISE...........................................................................................20
CHAPTER 6 PLAYBACK............................................................................................................................22
CHAPTER 7 CONFIGURATION .................................................................................................................25
7.1 LOCAL CONFIGURATION...................................................................................................................25
7.2 SYSTEM ............................................................................................................................................26
7.2.1 SYSTEM CONFIGURATION........................................................................................................................26
7.2.2 SCHEDULED REBOOT..............................................................................................................................30
7.2.3 LOG SEARCH ........................................................................................................................................30
7.2.4 SECURITY.............................................................................................................................................30
7.2.5 SD CARD.............................................................................................................................................32
7.3 NETWORK ........................................................................................................................................34
7.3.1 BASIC SETUP ........................................................................................................................................34
7.3.2 ADVANCE SETUP ...................................................................................................................................36
7.4 VIDEO ..............................................................................................................................................43
7.4.1 VIDEO.................................................................................................................................................43
7.4.2 AUDIO ................................................................................................................................................44
7.5 IMAGE..............................................................................................................................................45
7.5.1 IMAGE ................................................................................................................................................45

User Manual of Ozaas Network Camera V8.1.4.3
5
7.5.2 OSD ..................................................................................................................................................48
7.6 EVENTS ............................................................................................................................................48
CHAPTER 8 APP CLIENT .......................................................................................................................55
8.1 INSTALLATION & REGISTER...............................................................................................................55
8.2 ADD DEVICE .....................................................................................................................................56
8.3 LIVE PREVIEW ..................................................................................................................................57
8.4 PLAYBACK ........................................................................................................................................59
CHAPTER 9 FREQUENTLY ASKED QUESTIONS .........................................................................................61
Chapter 1 Product Introduction

User Manual of Ozaas Network Camera V8.1.4.3
6
1.1 Product Manual
Ozaas Network Camera is integrated video and audio acquisition, intelligent coding and
network transmission and other functions of digital monitoring products. Using embedded
operating system and high-performance hardware processing platform, with high stability and
reliability to meet the diverse needs of the industry.
Ozaas Network Camera based on Ethernet control, image compression can be achieved
through the network and transmitted to different users; based on NAS centralized storage,
convenient data storage and call. Ozaas Network Camera support TCP / IP, UDP, HTTP,
HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, SMTP, SNMP and other network
communication protocols; support ONVIF2.4, CGI, mainstream manufacturers agreement
and other Internet protocols.
You can use the browser or client software to control the Ozaas Network Camera, and
through the browser to set the Ozaas Network Camera parameters, such as system
parameter settings, OSD display settings and other parameters; through the browser or client
software configuration can also achieve motion detection, Abnormal alarm and other
intelligent functions, the specific function parameters, please take the actual equipment.
1.2 Product Features
This section introduces the webcam from the product features, allowing you to become more
familiar with and familiar with webcams.
Video and capture functions
The Ozaas Network Camera supports video recording and capture function.
Mirror function
The Ozaas Network Camera supports video horizontal, vertical, horizontal vertical flip
function.
Day and night mode adjustment
The Ozaas Network Camera supports LDR automatic, daytime, night and video auto four
modes. In the LDR automatic mode, the camera automatically switches mode according to
ambient light changes; the picture is color in daytime mode; the picture is black and white in
night mode; in video auto mode, the video image changes with the ambient light.
Electronic shutter function
Low-light electronic shutter When you are in a low-light environment, you can set the
low-light electronic shutter function, then the Ozaas Network Camera shutter automatically
slows down, by extending the exposure time to get brighter, less noise images.
Backlight compensation or Wide dynamic function
When the backlight compensation function is turned on, the Ozaas Network Camera will
automatically adjust the brightness of the target area to ensure that the screen of the target
area is clearly visible.
When wide dynamic, the Ozaas Network Camera automatically balances the brightest and
darkest screens in the monitor screen to enhance the dynamic range of the overall picture in
order to see more monitor picture details.
Event function
The Ozaas Network Camera event includes motion detection, occlusion alarm, video loss,
alarm input / output and abnormal alarm.
User management
You can manage multiple different users through the system administrator "admin" user and
configure a different level for each user.
Video playback
Support the TF card or SD card to support the Ozaas Network Camera to support video
playback, query and playback card recording.
WIFI function
With WIFI function camera, support wireless connection router WIFI hotspot or with a hot
wireless NVR. With WIFI hotspot camera, support mobile phone connected camera WIFI
hotspots, preview IPC real-time video.
PTZ function

User Manual of Ozaas Network Camera V8.1.4.3
7
With PTZ function camera support lens zoom, aperture control, PTZ control and cruise
settings and other functions.
Cloud storage function
The Ozaas Network Camera supports the cloud storage function, which stores the device
motion detection alarm information on the cloud server.
Note
Ozaas Network Camera above product features depending on the specific model,
please take the actual product technical parameters shall prevail.
Chapter 2 Operating instructions
2.1 Network Connection
Cautions
If you have access to the Internet at your own risk, including but not limited to the product
may be subject to network attacks, hacker attacks, virus infection, the company does not
cause the product abnormalities, information disclosure and other issues, but the
company will In time to provide you with product-related technical support.
To view and configure the Ozaas Network Camera over the network, you need to
connect the IP camera to your computer and install IPC Search or VMS software to
search and change the IP of your Ozaas Network Camera. And then through the browser
to preview and related functions of the configuration.
2.1.1 Wired network connection
Before configuring the Ozaas Network Camera, make sure that the IP camera is connected
to the computer and that you can access the Ozaas Network Camera you want to set up.
There are two types of wired connections; you can directly connect the Ozaas Network
Camera to the computer with a network cable as shown in Figure 2-1:
Figure 2-1
Set Ozaas Network Camera over the LAN via a switch or a router as shown in Figure 2-2:
Figure 2-2
2.1.2 Wireless internet access
Some Ozaas Network Cameras support wireless network transmission, in the wireless

User Manual of Ozaas Network Camera V8.1.4.3
8
network environment, the Ozaas Network Camera and computer connection as shown in
Figure 2-3.
Figure 2-3
2.2 Detecting and Changing the IP Address
To access the IP address of a Ozaas Network Camera, proceed as follows:
Step 1: Search IPC IP address.
Using the IP Search tool, you can search all the online cameras in the LAN and display
the IP, MAC address, version, port and other information of the camera, as shown in
Figure2-4:
Figure 2-4
Use the VMS client software to search for online devices. For details, refer to the
VMS User Manual.
Step 2：Change the IP address and sub net mask to the same sub net as that of your
computer.
In the IP search tool to select the device to modify the IP, right side of the interface
directly modify the IP and gateway, enter the password, and click "Modify".
Step 3：Open the browser to enter the IP address of the camera, enter the web login screen.

User Manual of Ozaas Network Camera V8.1.4.3
9
Note:
The default IP address is 192.168.1.168 and the port number is 80. The default user
name is admin, and password is admin. And you are highly recommended change the
initial password after your first login.
For accessing the Ozaas Network Camera from different sub nets, please set the
gateway for the Ozaas Network Camera after you logged in. For detailed information,
please refer to Section 4.4.3.1 Configuring TCP/IP Settings.
2.3 Setting the Ozaas Network Camera over the WAN
This section explains how to connect the Ozaas Network Camera to the WAN with a static IP
or a dynamic IP.
2.3.1 Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP address,
you can connect the Ozaas Network Camera via a router or connect it to the WAN directly.
➢The router is connected to the Ozaas Network Camera as shown in
Figure 2-5:
Figure 2-5
Specific steps are as follows:
Step 1：Connect the Ozaas Network Camera to the router.
Step 2：Assign a LAN IP address, the sub net mask and the gateway. For details, please
refer to 7.3.1.
Step 3：Save the static IP in the router.
Step 4：Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary
according to the different routers. Please call the router manufacturer for assistance with port
mapping.
Step 5：Visit the Ozaas Network Camera through a web browser or the client software over
the internet.
➢Directly through the static IP connection IPC, as shown in Figure 2-6:
Figure 2-6
You can also save the static IP in the camera and directly connect it to the internet without
using a router. For details, please refer to 7.3.1.
2.3.2 Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the
Ozaas Network Camera to a modem or a router.
➢The router is connected to the Ozaas Network Camera

User Manual of Ozaas Network Camera V8.1.4.3
10
Specific steps are as follows:
Step 1：Connect the Ozaas Network Camera to the router.
Step 2：Assign a LAN IP address, the sub net mask and the gateway. For details, please
refer to 7.3.1.
Step 3：In the router, set the PPPoE user name, password and confirm the password.
Step 4：Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary
according to the different routers. Please call the router manufacturer for assistance with port
mapping.
Step 5：Apply a domain name from a domain name provider.
Step 6：Configure the DDNS settings in the setting interface of the router.
Step 7：Visit the camera via the applied domain name.
Note:
The obtained IP address is dynamically assigned via PPPoE, so the IP address always
changes after rebooting the camera. To solve the inconvenience of the dynamic IP,you
need to get a domain name from the DDNS provider (E.g. DynDns.com). Please follow
the steps below for normal domain name resolution and private domain name resolution
to solve the problem.
➢Normal Domain Name Resolution as shown in Figure 2-7:
Figure 2-7
Specific steps are as follows:
Step 1: Apply a domain name from a domain name provider.
Step 2: Configure the DDNS settings in the DDNS Settings interface of the Ozaas Network
Camera. For details, please refer to 7.3.2.
Step 3: Visit the camera via the applied domain name.
➢Private Domain Name Resolution, as shown in Figure 2-8:
Figure 2-8

User Manual of Ozaas Network Camera V8.1.4.3
11
Specific steps are as follows:
Step 1: Install and run the IP Server software in a computer with a static IP.
Step 2: Access the Ozaas Network Camera through the LAN with a web browser or the client
software.
Step 3: Enable DDNS and select IP Server as the protocol type. For details, please refer to
7.3.2.
Chapter 3 Access to the IPC by Client Software
The product CD contains the VMSLite client software. You can view the live video and
manage the camera with the software.
Follow the installation prompts to install the software. The control panel and live view
interface of VMSLite client software are shown as show in Figure 3-1.
Figure 3-1
Note:
For detailed information about the software, please refer to the user manual of the
Ozaas VMSLite Client Software.

User Manual of Ozaas Network Camera V8.1.4.3
12
Chapter 4 Access to the IPC by Web Client
4.1 Preparation before install plugin
In ensuring the IPC and the current user's computer after completion of all the hardware
connection and power equipment normal, open the computer, run ping the IP address of
the IPC (Note: the IP address of the IPC in LAN must be unique). Such as IPC IP for
192.168.1.168, run ping 192.168.1.168. If there is a response to the IPC as shown in
Figure 4.-1, indicating that the network connection is normal, you can download the
plug-in.
Figure 4-1
4.2 Install the HsWebplugin.exe Controls
Note:
If you have already modified the IP address of your Ozaas Network Camera, please
log in with the new IP address.
Please open the browser and input the IP address of IPC in the address bar. (For the first
time to use the default address is: http://192.168.1.168), you will be prompted to download
information, as show in Figure 4-2:

User Manual of Ozaas Network Camera V8.1.4.3
13
Figure 4-2
Click to download and you can choose "Run" or save directly the
installation。Click” Next” to complete the installation as shown in Figure 4-3 (1, 2, 3, 4, 5,
and 6).
Figure 4-3（1）

User Manual of Ozaas Network Camera V8.1.4.3
14
Figure 4-3（2）
Figure 4-3（3）
Figure 4-3（4）

User Manual of Ozaas Network Camera V8.1.4.3
15
Figure 4-3（5）
Figure 4-3（6）
Click "Finish” returning to the page.
Notice
If the system prompt "installation failure", please uncheck the "cancel protection mode" in
the setting safety of "Internet options" and enter the "custom level" ActiveX control
Settings as show in Figure 4-4, and reinstall HsWebplugin.exe after save settings.

User Manual of Ozaas Network Camera V8.1.4.3
16
Figure 4-4
4.3. Interface operations and Usage:
4.3.1 Login
After installing the plug-in, refresh the browser interface; enter the login screen as shown
in Figure 4-5:
Figure 4-5
When you log in for the first time, enter the default user name: admin, password: admin,
select the system language (currently supported in Simplified Chinese, Simplified Chinese,
English, Russian, Korean, Polish, French, Japanese, Spanish, Portuguese , Italian,
Hebrew, Turkish, Bulgarian, Persian, German, Dutch, Czech).
4.3.2 Change password

User Manual of Ozaas Network Camera V8.1.4.3
17
After successful login, the interface prompts to change the password, as shown in Figure
4-6:
Figure 4-6
For the account security recommendations click "modify immediately", enter the user
management interface to modify the password, as shown in Figure 4-7:
Figure 4-7
To change your password, follow these steps:
Step 1: Enter the new password in the Password and Confirm Password fields;
Step 2: Fill in the security issues as needed, this item is optional, may not fill;
Step 3: Click "Save" to complete the password modification, the interface will
automatically jump to the login interface.
Note:
When the IPC password for the initial password "admin", each login will prompt to
change the password, please change the password and set a high-intensity
password after login.

User Manual of Ozaas Network Camera V8.1.4.3
18
4.3.3 Exit System
When you enter the Ozaas Network Camera main interface, you can click the upper right
corner of the " " safe exit system.
4.4 Main interface description
In the IPC main interface, you can preview real-time video, playback, configuration and
PTZ control and other functions, the interface shown in Figure 4-8:
Figure 4-8
Live View: For IPC monitoring screen preview, you can switch the code stream
preview, preview can also be achieved video, capture, electronic zoom and other
functions.
Playback：Select the time or video type to find the device TF card in the video and
playback.
Configuration: Click into the IPC configuration interface for system configuration and
function configuration.
PTZ Control: Used to set the PTZ preset point, cruise line and PTZ rotation direction
preview real-time video and so on.
Note:
Ozaas Network Camera main interface layout function and other information, please
take the actual equipment function prevail.
Chapter 5 Live preview
5.1 Live preview
Click " " to enter the IPC preview interface, as shown in Figure 5-1:

User Manual of Ozaas Network Camera V8.1.4.3
19
Figure 5-1
【switching window size】In the real-time preview interface on the top left of the preview
ratio option, click "4: 3", "16: 9", "X1", "full screen" to switch the video preview scale.
【switching option】In the upper left of the real-time preview interface, there is a stream
switching option. Click "Main Stream", "Sub Stream" and "Triple Stream" to switch preview
video stream.
The preview interface operation buttons are shown in Table 5-1.
Icon
Description
The window size is 4:3.
The preview screen is displayed in its original size.
The window size is 16:9.
Self-adaptive window size.
Main Stream/Sub
Stream/Tri-stream
To switch the real-time preview stream, take the actual function of
the device.
/
Start/Stop live view.
Manually start/stop recording.
Manually capture the picture.
Turn on / off the electronic zoom function, turn on the electronic
zoom function, in the preview image, hold down the left mouse
button to select the electronic zoom area, the interface shows the
region to enlarge the image
Turn on/off Sound.

User Manual of Ozaas Network Camera V8.1.4.3
20
Open / Close talk back
Table 5-1
5.2 Camera settings PTZ, zoom, cruise
Click " " on the right side of the window to display the PTZ control interface. Click " "
to hide the PTZ control interface, where you can set the direction of the PTZ rotation of the
camera, Zoom in / out, focus - / focus +, one-key focus, lens initialization, cruise, as shown
in Figure 5-2:
Figure 5-2
The PTZ control menu is shown in Figure 5-3 below:
Figure 5-3