ozzie Golem Mini User manual

Outdoor Wireless Speaker
User Manual
Golem Mini
WATER RESISTANT IPX7 RATING
SAFETY INSTRUCTIONS
Read all instructions
Only charge with devices rated and marked with 5V to avoid damage to the speaker.
Do not open up the speaker, it voids the warranty and may damage the product.
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge
cycles
varies by use and settings.
Never place the speaker close to high temperature heat sources.
To keep the warranty valid, never try to repair the product yourself.
PARTSAND FUNCTIONS
1. Lanyard.
2. +: Volume up button: next song, increase the volume.
3. -: Volume down button: previous song, decrease the volume.
4. Bluetooth Indicator.
5. Power button: power on/off, switch the playing mode, reset.
6. Pause button: play, pause, answer call, TWS.
7. AUX IN port.
8. Type-C charging port.
9. LED indicator.
10. TF card slot.
11. Microphone.

THE SPEAKER’S BATTERY
A built-in rechargeable battery powers the speaker.
CHARGING
Connect the supplied charging cable to the charge input and to a USB port on your computer or a
USB charger. The charging LED is lit red during charging. The LED turns off when fully charged.It is
recommended to charge 10 minutes before power on if you 7 days unused, then you can
continue to use while charging.
POWER ON/OFF
Power on: Long press power button 3 seconds to power on the speaker, then the Bluetooth
indicator light is on and you can connect Bluetooth devices.
Power off: Long press power button 3 seconds to power off the speaker, and then Bluetooth
indicator will turn off.
Led on/off
Short press the Bluetooth button to turn on the led, when the led is on then you can short press
the Bluetooth button to turn it off.
CONNECT THE SPEAKER
Turn on the speaker, the bluetooth indicator flashing white slowly, on your device search for
Bluetooth devices.
Select the speaker from the list. It will give an indication sound when the connection is
successful.
the bluetooth indicator is flashing all the time . Only one Bluetooth device can be connected at
the same time.
If you want to connect another device to the speaker, then first disconnect the current one.
DISCONNECT THE SPEAKER
When it’s connected via Bluetooth: Long press the Bluetooth button to disconnect.
RECONNECT THE SPEAKER
Some Bluetooth devices support automatic reconnection, with those devices the speaker will
automatically reconnect.

The speaker will not automatically reconnect on devices that does not support automatic
reconnection.
When it’s not connected: long press Bluetooth button second to connect to the last disconnected
device.
PLAYING MODE
Short press power button to switch different playing mode: BT, AUX, TF.
PLAY MUSIC USING MICRO SD CARD
Connect a micro SD card and power on the speaker.
AUDIO CABLE CONNECTION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
THE PAUSE BUTTON’S FUNCTIONALITY
Short Press: 1) Music playback status: play, pause function.
2) When there is an incoming call: answer the call.
3) When you’re receiving the call: hang up the phone call.
Long Press: 1) When you’re calling: Press 2 seconds to reject the call.
2) Press 2 seconds to enter TWS connection, once connected,
press 2 seconds to disconnect TWS connection.
3)Long press for 5 seconds to clear the pairing information and return to the default
volume with a beep, it will automatically turn off
Double press: When it’s connected via Bluetooth to your phone: to call back the last call.
CHANGE VOLUME AND SONG
When listening to music
Increase volume: Short press on the “+” button.
Decrease volume: Short press on the “- “ button.
Previous song: Long press on the “-” button.
Next song: Long press on the “+” button.
HANDS-FREE FUNCTIONALITY

1. Connect your phone via Bluetooth, the speaker will play ringtones while a call coming.
2. Short press the pause button to answer the call on the speaker, you can talk to each other
through the microphone hole, after call ended, it will continue to play music.
3. Long press the pause button on the speaker to reject an incoming call.
4. When you connect your phone, press twice in rapid pause button to call back the last call by
telephone.
RESET FUNCTIONALITY
Press and hold the power button for 10 seconds to automatically reset the speaker and turn it
off .
AUTOMATICALLY TURN OFF FUNCTIONALITY
The speaker will automatically turn off in 10 minutes when Bluetooth is not connected and no
music is playing.
TECHNICAL PARAMTERS
•Model: Golem Mini •Bluetooth: V5.0
•Speaker: Ø43mm 4Ω 5W*2 •Built-in rechargeable battery: Li-on, 3.7V, 1800mAh
•Charging time: 2.5-3 hours •Playing time: 7 hours
•Input: 5.0V 1.0A •Product Size: 84*106mm
•Product Weight: 320g •Range: Up to 10m
•Waterproof level: IPX7
PACKAGE INCLUDING
•1pcs* Golem Mini wireless speaker • 1pcs* Product manual • 1pcs* Type-C cable
TWS CONNECTION
1: Turn on both speakers
2: Press and hold the Play/Pause-button on one of the speakers for about 2 seconds until you
hear a “beep”sound. The default is the primary speaker that you operated the Play/Pause-button
of this spaker for pairing initially.
TWS DISCONNECTION
1. Press and hold the Play/Pause-button on one of the speakers for about 2 seconds until you
hear a “beep”sound

EXPLANATION
1. the symbol indicates: The product is only suitable for the safe non-tropical climates.
2. Note: Please use the same type or equivalent type of battery to replace if the battery is
scrapped. Otherwise maybe explosion occurs.
3. The lithium battery may not be exposed such as fire or excessive heat.
FAULT AND MAINTENANCE
First fault: connection failed.
Solution:
(1) Please check whether the multifunction indicator light flashes blue. Please power on your
speakers if the light isn’t on. Please charge the speaker if the light is still not on.
(2) Please turn off the other Bluetooth devices, if there are many Bluetooth devices surrounding.
This may result in search difficulties.
(3) Restart wireless speaker on devices for Bluetooth search function.
Second problem: The music player appears sound breaks.
Solution:
(1) View the distance between the player and the speaker has not been exceeded offective
Bluetooth connection distance 8-12meters.
(2) Ensure there is not any obstacle between the play device and speakers.
(3) Check the playback device or whether the speaker is in a low power state.
NOTES BEFORE USE
This product is designed with full attention for safety performance. To ensure safe operation,
please follow
the following rules:
1. Place the speakers in a stable position avoid fall and cause damage or personal injury.
2. Do not drop, disassemble, open, crush, bend, puncture, burn speaker.

3. Do not close to any heat source (such as radiators, heating equipment, stoves, or other
heat-generating equipment) where the use of speakers.
4. Please send professional maintenance staff to repair for any reason damage.
5. Before wiping with a dry cloth to clean the speakers, set the power switch to the off position
and unplug the power cord from the power outlet.
6. Health considerations, please adjust the sound to a suitable level.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and this device must accept any interference
received, including interference that may cause undesired operation.
WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
TROUBLESHOOTING
The speaker does not turn on ?
Recharge your speaker.
The speaker does not turn off or does not respond ?
Reset your speaker. hold the power button for 6 seconds to automatically reset the speaker and
turn it off .
There is no sound?
Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/disturb the signal.
Check via the device’s Bluetooth connection if the speaker is connected with the device.
There is poor sound quality?
Move the device closer to the speaker or try removing obstacles between them.
Cannot connect the device with the speaker?
Disconnect other connected devices and then try again.
You can force a disconnection by moving out of Bluetooth range (10 m).
In order to avoid harming the product performance, please do charge your device each 3 months
at least.