ozzie OZ-X9 User manual

User Manual
Outdoor Wireless Speaker
WATER
RESISTANT
RATING
IPX5
Partsand funcons
1. Leather lanyard.
2. Power buon: Long press to
power on, short press to
transfer the playing mode.
3. Long press to increase the
volume, short press to next
song.
4. Long press to decrease the
volume, short press to
previous song.
5. The mul-funcon buons:
play / pause / answer call.
6. AUX IN cable connecon
interface.
7. LED indicator
8. USB charging hole.
9. Reset buon
10. The charge indicator
Charging
Please use the supplied charging cable for the X9 charging standard USB plug
in a power output USB port. It is recommended to charge 10 minutes before
power on if you 7 days unused, then you can connue to use while charging.
Power on/off
Power on: Long press power on the speaker, then the Bluetooth indicator light
is on and you can connect Bluetooth devices.
Power off: Long press power on the speaker, and then Bluetooth indicator will
turn off.
Wireless handsfree
1. Connect your phone via Bluetooth, the speaker will play ringtones while a
call coming.
2. Short press the mulfuncon key to answer the call on the speaker,
you can talk to each other through the microphone hole, aer call ended,
it will connue to play music.
3. Long press the mulfuncon key on the speaker to reject an incoming call.
4. When you connect your phone, press twice in rapid mulfuncon key to
call back the last call by telephone.
Volume adjustment
Long press the + / - keys to adjust the volume or volume on the device.
Technical parameters
60.0 mm
90.0 mm
Fault and maintenance
First fault: connecon failed.
Soluon:
(1) Please check whether the mulfuncon indicator light flashes blue.
Please power on your speakers if the light isn’t on. Please charge the
speaker if the light is sll not on.
(2) Please turn off the other Bluetooth devices, if there are many Bluetooth
devices surrounding. This may result in search difficules.
(3) Restart wireless speaker on devices for Bluetooth search funcon.
Explanaon
1. the symbol indicates: The product is only suitable for the safe
non-tropical climates.
2. Note: Please use the same type or equivalent type of baery to replace if
the baery is scrapped. Otherwise maybe explosion occurs.
3. The lithium baery may be exposed such as fire or excessive heat.
Notes before use
This product is designed with full aenon for safety performance. To ensure
safe operaon, please follow the following rules:
1. Place the speakers in a stable posion avoid fall and cause damage or
personal injury.
2. Do not drop, disassemble, open, crush, bend, puncture, burn speaker.
3. Do not close to any heat source (such as radiators, heang equipment,
stoves, or other heat-generang equipment) where the use of speakers.
4. Please send professional maintenance staff to repair for any reason damage.
5. Before wiping with a dry cloth to clean the speakers, set the power switch
to the off posion and unplug the power cord from the power outlet.
6. Health consideraons, please adjust the sound to a suitable level.
Second problem: The music player appears sound breaks.
Soluon:
(1) View the distance between the player and the speaker has not been
exceeded offecve Bluetooth connecon distance 8-12meters.
(2) Ensure there is not any obstacle between the play device and speakers.
(3) Check the playback device or whether the speaker is in a low power state.
270.0 mm
Package including
● 1pcs* X7 wireless speaker
● 1pcs* Micro USB cable
● 1pcs* Product manual
● 1pcs* 3.5mm audio cable
OZ-X9

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.