Packard Bell cloudBook User manual

Quick Start Guide
N1000
cloudBook®

In the box
Quick Start Guide
N1000
cloudBook®
Keyboard
10.1” tablet
Quick Start Guide
OTG cableCharger

Buttons and ports
1 2
45
9
6
3
8
10
11
7
Volume buttons
2
Front camera
3
Microphone
4
Headphone jack
5
USB type C (data only)
6
�Power button
1Mini HDMI 7
USB port
DC charger port
8
9
Micro SD card slot
10
Stereo speakers
11

14
13
Pogo pins
14
Touchpad
13
Bottom of the tablet

Getting started
POWER ON: Press and hold the POWER button until the
tablet turns on.
LOCK: Briey press the POWER button to lock the tablet.
POWER OFF: Press and hold the POWER button until the
tablet turns o.
Tablet (SIDE)
Wall outlet
Charger
Charging
pin
�Power button

Click to seeall the pre-installed apps.
In tablet mode, you can bring up the virtual
keyboard by tapping the icon on the
lower right-hand corner of your screen.
After completing the Windowssetup, the home screen
will be displayed.

• To dock the tablet to the keyboard, align the tablet and the
keyboard, then slide the tablet into the dock as shown below.
• To undock the tablet from the keyboard, firmly hold the keyboard
as shown below, then gently pull the tablet upwards.
Note:
1. The tablet will automatically recognize the keyboard when
docked properly.
2. If the tablet is wrongly docked then it may damage the keyboard
or tablet.
Keyboard
Tablet
Keyboard dock

Using the touchpad
Right
Click
The touchpad provides the functionality of a mouse. It has a
touch-sensitive surface that senses the motion and position of
your finger(s).
The touchpad does not have a mechanical click. Tap to select.
Tap the touchpad
to select
Correct
Don’t push down
on the touchpad
Incorrect
IMPORTANT

Scroll:
Place two ngers on the touchpad and
slide them to scroll in any direction on
the page or program
Zoom:
Place two ngers on the touchpad and
then move them apart or closer to
zoom-in or zoom-out.
Switch program:
Place two ngers on the touchpad and
swipe toeither side to switch between
openwindows and programs.

Function/Shortcut keys
To access the shortcuts of the Function keys, F1 through F12,
press& holdthe Fn button and select the desired
Function key.