PALADIN CASEWORKS AFW125720 User manual

Paladin Caseworks Inc
www.paladincaseworks.com
[e-mail] Rev.: 3.15.16
Order #:
QTY:
1
AFW125720 and AFW125724
End of Range Shelving Units
Order #: 0
Image for reference only
May not be for the height ordered.

Paladin Caseworks Inc
www.paladincaseworks.com
[e-mail] Rev.: 3.15.16
AFW125720 and AFW125724
End of Range Shelving Units
No. of No. of Total No.
Key Description Parts Units of Parts
*** Please read and review all instructions prior to starting assembly *** ASoffit 111
No. of No. of Total No.
Key Description Parts Units of Parts
1Rafix cam 8 1 8 B End Panel 212
Factory Installed 1 Left
hand and
2Shelf Pin 16 116 1 Right
hand.
3Adj Panel Glide 4 1 4
CToe Kick 111
4Rafix Post 8 1 8
5Minifix Cam 10 110 DShelves 414
6Minifix Post 10 110 EBack 111
Hardware Packed By:
Date Packed: Wood Parts Packed By:
Date Packed:
Order #: 0

Paladin Caseworks Inc
www.paladincaseworks.com
[e-mail] Rev.: 3.15.16
AFW125720 and AFW125724
End of Range Shelving Units
*** Please read and review all instructions prior to starting assembly ***
Step 1 Screw minifix posts (6) into each end panel (B).
Step 2 Screw rafix posts (4) at top and bottom of each end panel
Step 3 Lay back panel (E) horizontally with holes facing up.
Position the minifix cams (5) in holes along edge of
back panel with arrow in cams facing outward.
Step 4 Insert minifix posts in one side panel into holes in edge of
back panel. Lock into place by turning minifix cam
clockwise with phillips screwdriver
Step 5 Repeat step 4 with remaining end panel
Step 6 Position Soffit (A) over the rafix posts and lock
into place by rotating the internal screw head
in the rafix cam (1) clockwise.
Step 7 Position toe kick ( C) over the rafix bolts and lock
into place by rotating the internal
screw head clockwise.
Step 8 Hammer the adjustable glides (3) into the holes in the bottoms of the side panels.
Rotate to level assembled unit.
Step 9 Set shelf pins (2) and the fixed shelf (D) in the location to close off the
base of the unit.Set shelf pins where needed
or the adjustable shelves (D).
AFW125720 and AFW125724
A
B
C
D
E
D
B
D
D

Paladin Caseworks Inc
www.paladincaseworks.com
[e-mail] Rev.: 3.15.16
End of Range Shelving Units
Furniture Care Recommendations
from the nation’s leading furniture manufacturers
1.) Dust frequently.
2.) Use a quality furniture polish approximately once a month to lessen your chance of expensive refinishing jobs.
3.) Clean up spills immediately. Use a blotting action rather than a wiping action.
4.) For cleaning use a soft, lint-free absorbent cloth.
5.) Avoid placing furniture in direct sun light.
6.) Avoid extremes in room humidity. Too high or too low humidity can cause wood to warp or glue lines to fail.
7.) Avoid extreme changes in temperature. Arrange furniture away from radiators, registers and air-conditioning units.
8.) Rotate accessories on furniture so they do not sit in the same place all the time.
9.) Do not place plastic or rubber objects on a wood finish-their ingredients react with those of the finish.
10.) Use pads, cloth or felt to protect the furniture surface from plastic, rubber, hot dishes, beverages, bookends, flowerpots and vases.
11.) Lift objects-do not drag them across the furniture surface.
12.) Never use silicone or petroleum distillate polishes.