PALECEK CALEB 780679C User manual

T. 800.274.7730 | F. 510.234.7234 | PALECEK.COM
Assembly Instructions
CALEB COFFEE TABLE
780679C / 780179C
PROFESSIONAL INSTALLATION REQUIRED
Important Safety Instructions:
• These instructions are provided for your safety. It is important that they are read carefully before use to ensure safe
operation of the product.
• For your safety, it is strongly recommended that two people assemble the table considering the weight of the table.
Parts List:
A) Table Top
B) Table Base
C) Large washer ( 6 pcs each base)
D) Pan Head Bolt ( 6 pcs each base)
Tools Needed: Phillips Head Screw Driver
Pan Head Bolt
Large washer

T. 800.274.7730 | F. 510.234.7234 | PALECEK.COM
Pre-Assembly:
• Remove all parts and hardware from the box along with any plastic protective packaging. Do not discard contents until
after assembly is complete to avoid accidentally discarding small parts or hardware.
• For your safety and convenience, assembly by two people is recommended
• Lay the marble top out on the floor with its top facing the floor and surface with holes facing up. If there is no carpet, cover
the floor with a soft cloth so as not to scratch the finish of the marble and the wooden bases.
Installation Instructions:
1. After placing the top on the floor upside down, align the holes in each leg with the threaded inserts on the top panel.
Leg 1
Leg 2

T. 800.274.7730 | F. 510.234.7234 | PALECEK.COM
2. Use screw driver to tighten the screws and large washers into each hole in the base to connect to the top panel.
3. After attaching the bases by tightening all the screws, use at least two people to carefully flip the table over to its upright
usuable position.
Care Instructions:
• Clean Surfaces with a dry or damp soft cloth.
• Do not use abrasive cleaners.
• Do not use furniture wax or polish.
• Do not leave spills unattended.
• Periodically check and tighten hardware as necessary.
• Protect from heat and liquids.