PALI Volterra Forever User manual

This crib has been designed for your child's comfort
and your convenience. Quality material and
workmanship have gone into this crib which will provide
a sound and comfortable bed for your baby if properly
assembled and maintained. For the security of your
child and your own peace of mind be sure to follow the
assembly instructions exactly. Adult assembly is
required. A periodic check should be made of all bolts
and screws, which should be tightened if needed.
Moisture and heat are harmful to the finish; for this
reason use extreme caution when vaporizer is in use.
The vapor steam should always be aimed away from
the crib as well as away from other wood furniture.
Some types of soft plastic toys could damage the finish
when placed against it.
Hardware Parts List
Allen Wrench
Pali Design, Inc. Assembly
Instruction
1525 Hymus Boul.
Dorval, QC
H9P-1J5 Canada
Phone: [phone]
[email protected] Volterra Forever Crib
www.pali-design.com
Adult assembly is required.
IMPORTANT: In order to properly assemble the crib,
carry out the operations in the order specified. Failure to
assemble the crib in the manner recommended could
make the crib hazardous. Carefully remove and lay out
all parts. Familiarize yourself with all diagrams to
facilitate the assembly of your crib. Check parts
enclosed in hardware bag with the HARDWARE PARTS
LIST to be sure all are included and quantities are correct.
INSTRUCTION LEAFLET
Important, keep for future
reference. Read carefully.
D
Crib Parts List:
Round Allenhead Bolt Washer
KD Nut
4x 4x
1x4x
A
E
F
8x
Round Allenhead Bolt
B
4x
Round Allenhead Bolt
C
Tools Needed for
Assembly:
Stabilizer Bar Mattress Support
GHJKL
2x
End Panel
1x1x1x
Footboard
1x
Headboard
J1
J2
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 1 of 7

CRIB
CRIB Step Attaching the Sides (End Panels)
1
CRIB Step
2Attaching the Stabilizer Bar
Assembling Crib
• As soon as baby starts to sit up you must use the lowest mattress support position.
• To assemble the crib with the high mattress support position see Step 1.
• When using the crib as a toddler bed, remove the Footboard and the lower mattress
support position must be used.
• This crib has three mattress support positions for use in your baby's first months.
B
B
Hi
Lo
Mid
Top
Bottom
Right End Panel
Left End Panel
Top
Bottom
G
J1
J2
Right End Panel
Left End Panel
K
B
B
B
B
B
B
A
A
A
A
A x 2
A x 2
E x 2
E x 2
E
E
E
E
K
K
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 2 of 7

Crib
CRIB Step Attaching the Footboard
3
CRIB Step Attaching the Mattress Support
4
C
C
C
Top
Bottom
Right End Panel
Left End Panel
Top
Bottom
Right End Panel
Left
End
Panel
Front
Back
Front
Back
C
H
D
D
D
D
D
D
D
D
D
D
D
D
C + D
C + D
C + D
C + D
L
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 3 of 7

Step
2
Toddler
Bed
Step
3
Toddler
Bed
Step
1
Toddler
Bed
Toddler Bed
& Child's Day
Bed
Transforming Crib into a Toddler Bed and a Child's Day Bed
(1215 Volterra Toddler Rail Kit sold separately)
Right End Panel
Left End Panel
Front
Back
Front
Back
Top
Bottom
Right End Panel
Left End Panel
Top
Bottom
Top
Bottom
Right End Panel
Left End Panel
Top
Bottom
Post
Post
Note: Bolts used to
attachtoddler bed posts
are the same bolts that
wereremoved when
detaching the footboard.
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 4 of 7

Toddler Bed
Toddler
Bed
Step
4
Toddler
Bed
Step
5
Top
Bottom
Right
End
Panel
Top
Bottom
Left
End
Panel
Right End Panel
Left
End
Panel
Front
Back
Front
Back
Note: Bolts in this step are from
the 1215 Volterra Toddler Rail
hardwarepack.
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 5 of 7

•
•
•
•
•
•
•
•
•
Child's Day Bed
WARNING STATEMENTS
Read all instructions before assembling crib. Keep instructions for future use.
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
Never use plastic shipping bags or other plastic film as mattress covers because
they can cause suffocation.
DO NOT place crib near window where cords from blinds or drapes may strangle
a child.
Infants can suffocate in gaps between crib sides and a mattress that is too small.
Infants can suffocate on soft bedding. Never add a pillow, comforter or padding.
To reduce the risk of SIDS, pediatricians recommend healthy infants to be placed
on their backs to sleep, unless otherwise advised by your physician.
Strings can cause strangulation! Do not place items with a string around a child’s
neck, such as hood strings or pacifier cords. Do not suspend strings over a crib
or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the
body or clothing on loose fasteners.
Child's
Day Bed
Step
1Top
Bottom
Top
Bottom
Right End Panel
Left
End
Panel
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 6 of 7

•
•
•
•
•
•
•
•
•
•
•
•
•
•
TODDLER BED WARNING STATEMENTS
Failure to follow these warnings and assembly instructions could result in serious
injury or death from entrapment or strangulation.
When child is able to pull to a standing position, set mattress to lowest position
and remove bumper pads, large toys and other objects that could serve as steps
for climbing out.
When child is able to climb out or reaches the height of35 in. (90 cm), the crib
shall no longer be used.
Check this product for damaged hardware, loose joints, missing parts or sharp
edges before and after assembly and frequently during use. DO NOT use crib if
any parts are missing, damaged or broken. Contact Pali for replacement parts
and instructional literature if needed. DO NOT substitute parts.
DO NOT use a water mattress.
CARE AND MAINTENANCE
When cleaning your crib, please use a non-toxic, non-abrasive cleaner. Mix a
solution of water with a small amount of mild dishwashing liquid. Apply to crib
surface with a soft, damp cloth lightly dampened in solution. After cleaning, dry
completely with a soft, dry cloth.
When storing crib use caution as extreme changes in temperature or humidity
can compromise the crib making it extremely dangerous to your child.
DO NOT place bed near window where cords from blinds or drapes may strangle
a child.
The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51 5/8 in. (1310mm) in length, 27 1/4 in. (690mm) in
width and 4 in. (100mm) in thickness.
Strings can cause strangulation! Do not place items with a string, cord or ribbon
around a child's neck, such as hood strings or pacifier cords. Do not suspend
strings over a toddler bed for any reason or attach strings to toys.
The minimum age of the intended user shall not be less than15 months and the
maximum weight shall not be greater than50 lbs. (22.7kg).
The guardrail provided must be used to avoid the formation of a gap between the
mattress and the bed that could cause an entrapment.
If refinishing, use a non-toxic finish specified for children's products.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST
27 1/4 IN. (69 CM) BY 51 5/8 IN. (131 CM) WITH A THICKNESS NOT
EXCEEDING 6 IN. (15 CM)
Pali Design, Inc. 1200_aimPA_20100317_1700 Page 7 of 7