Palsonic MODEL 5110PF User manual

PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:[phone]
FAX:[phone]
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5110PF
OWNER'S MANUAL
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PURE FLAT AV STEREO TELEVISION

Congratulations on your purchase of this Palsonic colour television receiver.
We recommend that you thoroughly read this manual before use to fully enjoy the many functions
and excellent effects of this receiver.
Retain this manual in an easily accessible location for future reference.
* Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Front view ...............................................4
Back view ................................................4
Remote controller ..................................5
Antenna connection ................................3
Battery installation .................................3
Cautions for safety .................................2
Features ...................................................1
INTRODUCTION
NOTES FOR OPERATION
INSTALLATION
APPEARANCE
Contents
Channel selection .....................................11
Convenient Picture Controls ..................12
Convenient Sound Controls ....................13
Other functions ........................................14
OPERATION
Turning the Power On/Off .................6
Tuning in ..............................................7
To preset channels (Auto search) ..........7
To preset channels (Manual search) ......8
To skip unnecessary position numbers .9
MFT (Manual Fine Tuning) ..................9
The setting of colour system & sound system.10
Sleep timer and to select the
language for OSD ................................14
CONNECTING OTHER EQUIPMENT
External Equipment Connections .......15
To connect AV input terminals ..........15
To connect MONITOR
output terminals ..................................16
OTHERS
Troubleshooting ......................................17
Specifications ...........................................17

INTRODUCTION
Features
Hyperband
English/Chinese on-screen menu display
100 preset channels
Auto-search, manual search
Intellectualized I C-bus control
Sleep timer, Auto Power-Off & blue background display
Four picture mode setting
AUDIO/VIDEO input & output terminals
S-VIDEO terminal
Advanced picture improvement circuit
1. Built-in digital comb filter (NTSC system)
To attain the complete separation of brightness and colour signals, to reduce colour
interface, blurry and dotted interruptions, to make the picture clearer.
Black level stretching circuit
To extend the dynamic scope of the picture, to make the picture’s level clearer
2.
1
51cm pure flat picture tube
Full function remote control
2
.
.
.
.
.
.
.
.
.
.
.
.

NOTES FOR OPERATION
Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please
turn off the power supply and remove the power plug. When it is to be left unattended for
a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to
avoid thunder strike.
Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted
on the TV set.
Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power
supply of the other type.
When an unusual situation
occurs, turn off the power
switch at once and remove the
plug from the wall outlet.
Contact a qualified service
department in your local area.
Do not expose the TV set to
rain or excessive moisture, to
prevent tire disaster or
electric shock. Avoid using
the set in very warm or damp
places. Never use it in a
bathroom.
There exists High Voltage in
this TV set. Do not remove
the cover to avoid danger.
The TV set should be placed
on an adequate place without
exposing it to direct sunlight
and other sources of heat to
prevent the deformation of the
cabinet or damage to components.
When the TV set is to be left
unattended, please turn off the
power switch and remove the
plug from the wall outlet.
In order to wipe dust off the
picture tube or off the cabinet,
you should remove the power
plug from the wall outlet first.
You can wipe lightly with a
piece of dry, clean, soft cloth.
Do not cover the Ventilating
holes in the cabinet. Keep a
space of more than 5cm from
the walls to the TV set, to
guarantee the good ventilation.
When the power cord or the
plug is damaged, please
contact a qualified service
department to get service.
Cautions for safety
2
*
*

Effective range of the remote
control operation
Antenna Connection
(1) Remove the back battery cover.
Installation
To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If
the signals are strong enough, you may use an indoor aerial.
Note: In case of using the
Twin-lead aerial feeder (300 )
for UHF/VHF aerial, use a 300-75
ohm adaptor (not supplied)
When using the coaxial cable (not
supplied) (75 ) for UHF/VHF
aerial, connect the plug into the
75 ohm aerial socket directly.
Note:
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the
power switch on the TV while connecting the antenna lead.
In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning
strike.
(2) Insert two size AAA batteries according to
the polarity indication inside the remote
controller.
3
Notes:
When the remote controller is not used for
an extended period of time or the batteries
are worn out, please remove the batteries in
time to avoid battery leakage.
Avoid moisture and mechanical shock to
the remote controller.
Do not drop, dampen or disassemble the
remote controller.
Battery installation
1.
2.
3.

Front view
Back View
Appearance
Note: Functions of MENU, TV/AV, VOL , CH are also provided to the
remote controller.
4
POWER SWITCH
TV/AV
MENU
VOLUME DOWN
CHANNEL UP
CHANNEL DOWN
VOLUME UP
(2) Video 2 input terminals
{VIDEO, AUDIO L/MONO, R}
Antenna input
MONITOR output terminals
{VIDEO, AUDIO L/MONO, R}
S-VIDEO
(1) Video input terminals
{VIDEO, AUDIO L/MONO, R}

Remote Controller
Appearance
5

If no picture appears on the screen, press the button or any one of 0~9 number buttons on
the remote controller to turn the set on.
Without using the remote controller, you can directly press VOL or CH or
TV/AV button on the set to turn on the TV.
To turn the power on/off
1. Press the POWER switch, the red power indicator lights up.
.
Turning the Power On/Off
OPERATION
If you want to turn off the TV temporarily, press the button on the remote controller to
switch the set to standby mode.
The following describes how to turn the TV on/off using the TV's main switch and the remote
controller.
3. Press the POWER switch to turn off the set completely.
Special indication:
Auto-Power-Off function: there are two kinds of Auto-Power-Off function:
If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically
turn off after about 15 minutes.
Sleep-timer function. However, if the Sleep-timer is operating, it takes precedence, that is,
the function of Auto-Power-Off, if no signals received will be ineffective.
6
*Note:
2.
If there are no input signals to the TV when the TV set is on, a blue background will
appear on the screen (when B.B (blue back) is set ON.)
After 15 minutes if there are still no signals to the TV, it will enter into standby mode
automatically
4.
1.
2.

.
OPERATION
Tuning in
There are two ways to preset channels: to preset channels automatically and to preset channels
manually. Below we will describe how to preset the channels by making use of the menu.
Use the AUTO SEARCH function to preset all the active channels in your local area
automatically.
To enter into menu
Press the MENU button repeatedly to call up the POS. MEMORY
menu on the screen.
Note: The MENU button refers to the MENU button on the remote
controller or on the TV set, the or button refers to the or
button on the remote controller or CH button on the TV set, the
or button refers to the or button on the remote
controller or the VOL button on the TV set.
AUTO SEARCH
1. Press the or button to select and highlight
AUTO MEMORY.
Press the button to start the AUTO SEARCH. All active
channels will be preset and stored into the memory
automatically. After presetting, the TV will return to the first
channel program.
During the process of AUTO SEARCH, pressing the
button on the remote controller will stop the process and the
TV will return to the first channel program.
To preset channels (Auto search)
7
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
AUTO MEMORY 5 VHFH
!!!!!!......
STOP
0
3.
2.

.
.
OPERATION
Tuning in (continued)
Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO-
SEARCH or if you would like to preset channels to specific position numbers one by one.
It is convenient to set the channel numbers to the same position numbers using MANUAL
SEARCH and SKIP functions.
Manual search
If AUTO SEARCH can not preset the desired channels, or you want to preset the desired
channels one by one with the preferred channel numbers, please make use of Manual search.
Enter into POS.MEMORY menu, press the or button to
select and highlight POSITION. Press the or button to
select a desired position number (from 00~99).
Note: press the or button to select a channel number
within 0.7 second. Press and hold the or button for over
0.7 second to select a decimal number.
Press the or button to select and highlight SEARCH. Press
the button to search channels from current channel to higher
channel. Press the button to search channels from current
channel to lower channel. When a channel is located, the
searching stops, this channel is then memorised with the preset
channel number.
you can also make use of BAND selection to quicken the
searching process in your desired band. Pressing the or
button moves the band to the next step in the sequence below.
VHFH UHF
3. When you want to store another channel with another position, repeat steps 1 & 2 above.
8
To preset channels (Manual search)
VHFL
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
1.
2.
Note:

OPERATION
To skip a position number
After presetting the channels, you can skip unnecessary position numbers so that only the channels
you want to watch are selected.
1. Enter into the POS. MEMORY menu, select and highlight
POSITION, then select the unwanted program number with the
or button.
2. Press the or button to move the cursor to "SKIP". Press the
After completion of channel preset, the position number will then
be skipped when you select channels with the CH button.
If you want to skip other unwanted channels, repeat step 1 above to
change the channel number.
or button to select "SKIP ON"
To restore a skipped position number
Select the position number you want to restore. Press the or button to move the cursor to
"SKIP". Press the or button to select "SKIP OFF".
MFT (Manual Fine Tuning)
When sound and picture’s effect of a channel is poor (for example: one or two CATV channel’s
sound and picture are not standard), you can correct them by making use of Manual Fine Tuning).
1. Enter into POS.MEMORY menu, select the channel you want to
manually fine tune.
2. Press the or button to select and highlight MFT, then press
the or button, the channel begins fine tuning until the
optimum picture and sound is achieved.
Note: if some channel’s colour is abnormal, it may be that the setting of
the colour system is wrong, please do adjustment according to The
setting of colour (on page 10) to set the colour system.
3. To exit the menu, press the MENU button repeatedly.
9
Tuning in (continued)
To skip unnecessary position numbers and MFT (Manual Fine Tuning)
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......

358NTSC
The setting of colour and sound system
Tuning in (continued)
Press the SYS button, the colour and sound system
will be displayed on the screen.
If the colour is abnormal, press the or
button to select COLOR, then press the or
button to select the proper colour system. Every
time you press the or button, the colour
system will change in the sequence below.
AUTO
3. If the sound is abnormal, press the or button to select SOUND,
then press the or button to select the proper sound system.
The sound system will change in the sequence below.
M BG
NOTE: You can also make use of OTHER menu to set the colour and
sound system.
Press the MENU button repeatedly to call up the OTHER menu on the
screen.
Press the or button to move the cursor to SYSTEM. Press the
or button to enter into the menu of SYSTEM.
Set the colour and sound system according to the above step 2 & 3.
Now you can watch the broadcasting TV program on the preset channels.
10
OPERATION
1.
PAL 443NTSC
2.
LANGUAGE
SYSTEM
OTHER
SELECT ADJUST
COLOR AUTO
SOUND BG
SELECT ADJUST
COLOR AUTO
SOUND BG
SELECT ADJUST
COLOR AUTO
SOUND BG
SELECT ADJUST
COLOR AUTO
SOUND BG
SELECT ADJUST

OPERATION
Channel selection
l You can watch TV programmes being broadcast on the preset channels.
You can select your desired TV program by one of the following methods.
Using the direct select buttons
To select a one-digit position number, press the -/-- button to display
"-" and 0~9 to select a number (0~9).
To select a two-digit position number, press -/-- to display "-" and
press 0~9 to select number (10~99).
Using the CH buttons
Press CH to select lower position numbers; CH to select higher ones.
Using the PREVIOUS channel button ( )
When there are no menus on the screen, pressing the button on the
remote controller (below the MENU button) can swap the current
viewed channel with the previous one. For example, the channel you
previously watched is 2, the present channel is 8, press the button,
it will return to channel 2, press the button again it will return to
channel 8.
11
1
30
2
8
To watch a TV programme
.
.

PICTURE
COLOR 50
BRIGHT 50
CONT 100
SHARP 50
BB ON
SELECT ADJUST
sharpersofter
*TINT
Selectable picture
OPERATION
Convenient Picture Controls
Item
To select the picture mode
You can select the picture quality instantly among three preset
modes and one user-set mode.
Press the P.S button to select the desired picture quality.
MEMORY1 MEMORY2 MEMORY3
Pressing (MEMORY 4)
COLOR
BRIGHTNESS
MEMORY1, MEMORY2, MEMORY3 and MEMORY 4 (user-set)
can be selected cyclically.
paler deeper 50 50 50
darker lighter 50 50 50
MEMORY 2
To set the desired picture quality to the MEMORY position
1. Press the MENU button to enter into the PICTURE menu. Or
CONTRAST
SHARPNESS
press the P.M button, the picture control menu appears.
weaker stronger 100 50 30
50 50 50
B.B
(blue back)
2. Press the or button to select the desired adjusting item,
purplish greenish
ON or OFF
and press the or button to adjust the level.
* TINT is for NTSC system only.
The adjusted level is stored in the MEMORY position.
12
PICTURE
COLOR 50
BRIGHT 70
CONT 100
SHARP 50
BB ON
SELECT ADJUST
MEMORY 3
MEMORY 1
MEMORY 4
With the blue background function ON, the TV will
Automatically turn blue when no signal is being received.
Press the or button to move the cursor to B.B.
Press the or button to change the blue background
setting ON or OFF
Blue background
PICTURE
COLOR 50
BRIGHT 70
CONT 100
SHARP 50
BB ON
SELECT ADJUST

!!!!!!!.....
Adjusting the volume and muting the sound
OPERATION
Convenient Sound Controls
To adjust the sound volume
Adjust the sound volume with the VOL buttons.
Press the VOL button to decrease the sound.
Press the VOL button to increase the sound.
To mute the sound
The muting function is convenient when you need to pay attention to surrounding sounds, answer
a phone call, receive a visitor, etc.
1. Press the MUTE button to mute the sound.
2. To restore the sound, press the MUTE button again or VOL buttons.
13
MUTE
VOLUME 50

1. Press the MENU button repeatedly until the OTHER
SLEEP:30MIN.
Sleep timer and to select the language for the OSD
OPERATION
Other functions
Making use of the Sleep timer function allows you to have the set
automatically turned off after a preset time.
Press the SLP button every time, the time displaying on the screen will
change in the sequence below:
SLEEP timer
To select the language for the OSD
Making use of this function can switch the language for the OSD to either English or Chinese.
ENGLISH
menu appears on the screen.
ENGLISH
Press the or button to move the cursor to LANGUAGE.
Press the or button to enter into the menu of
LANGUAGE.
3. Press the MENU button repeatedly to exit the menu.
14
LANGUAGE
OFF 120MIN 110MIN.......... 10MIN
Press the or button to select the desired language. The
selected language is displayed in red and the screen menu is
automatically displayed in that language.
2.
3.
LANGUAGE
SYSTEM
OTHER
SELECT ADJUST

To connect AV input terminal
CONNECTING OTHER EQUIPMENT
External Equipment Connections
The following describes how to use and connect the TV with other AV equipment. Refer to
the owner’s manual of the equipment to be connected as well.
You can connect video equipments such as a VTR and video camera to this TV and enjoy the
high quality picture and sound.
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input
terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (photo
type).
15
.
To video
output

To connect MONITOR output terminal
To connect AV input terminal (continued)
CONNECTING OTHER EQUIPMENT
To select the video input, press TV/AV the button on the TV set or AV button on the remote
controller repeatedly until you see the corresponding input indication on the screen. To return to
aerial input, press the AV button until it displays program number, or press channel select button
or the CH button.
If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS
button until the COLOR AUTO is displayed on the screen. If the picture is still abnormal,
press the or button until normal colour appears.
NOTE on the S-VIDEO terminal
The S-VIDEO input terminal has priority over Video 1 VIDEO terminal. If S-VIDEO input
terminal is used, the screen will display "S-VIDEO1" Note that S-VIDEO input terminal and
the Video 1 VIDEO terminal can not be used at the same time, otherwise it will cause disorder
picture.
You can connect a stereo system to the MONITOR output terminals (photo type) on the set to
enjoy a high-quality sound from the stereo system. The MONITOR output terminals output the
video and audio signals being displayed on the screen.
16
TV VIDEO 1 VIDEO 2
(S-VIDEO)

.
.
.
.
.
.
.
.
.
.
.
.
OTHERS
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the
trouble you are experiencing.
Spots appear on the screen
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
The remote controller does not work
TV cabinet creaks
Specifications
Power supply:
Power consumption:
Dimensions (mm):
Weight (kg):
CRT
TV system & channel range
System
PAL-B/G
NTSC-M US
VHF
2-12
2-13
UHF
21-69
14-79
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly
adjusted
Possible interferences of automobiles,
motorcycle, trolley bus, neon lamps, etc.
Possible interference of electronic
interference from another TV set, a
computer, an electronics game machine, a
broadcast station, etc.
This may be caused by reflections from
nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial “lead-in” is
damaged or comes off.
Check the antenna direction
The batteries may be worn out.
The batteries may be installed with their
polarity reversed.
Even if the picture or the sound is normal,
changes in the room temperature
sometimes make the TV cabinet expand or
contract, making a noise. This does not
indicate a malfunction.
AC 240V, 50Hz
80W
600 (W) x 466 (H) x 500 (D)
26
51cm pure flat picture tube
CATV
X~Z+2, S1~S41
A-6~A-1,A~W,AA~FF
Colour system:
Sound output:
Accessory:
* Note: Design and specifications are subject to change without notice.
PAL/ 4.43NTSC/3.58NTSC
3W + 3W (main sound channel)
one remote controller
Poor colour, poor tint
No power, red indicator is not lit up
Symptoms Check the following items
17

PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:[phone]
FAX:[phone]
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-21F83-00