Panasonic DMP-DSB100 User manual

VQT4M33
Owner’s Manual
(Detailed Information)
Blu-ray DiscTM Player
Model No. DMP-DSB100
Thank you for purchasing this product.
For optimum performance and safety, please carefully read this manual, “Quick Start Guide”, and
“Owner’s Manual (Essential Information)”.
P

2VQT4M33
Table of contents
Getting started
Unit and media care. . . . . . . . . . . . . . . . . . . . 3
Playable media . . . . . . . . . . . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . . . . . . . . 6
Connections & Settings
STEP 1 : Connecting to a TV. . . . . . . . . . . . . 7
STEP 2 : Connecting to an
amplifier/receiver . . . . . . . . . . . . . . 7
STEP 3 : Connecting to the network . . . . . . . 8
STEP 4 : Connecting to an
AC power source . . . . . . . . . . . . . . 9
STEP 5 : Settings. . . . . . . . . . . . . . . . . . . . . 10
Playback
Inserting or removing media . . . . . . . . . . . . 13
HOME menu . . . . . . . . . . . . . . . . . . . . . . . . 13
Multi User Mode. . . . . . . . . . . . . . . . . . . . . . 14
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Network Service
(Enjoying NETFLIX, etc.). . . . . . . . . . . . . . 17
Home Network feature. . . . . . . . . . . . . . . . .18
“HDMI CEC”. . . . . . . . . . . . . . . . . . . . . . . . . 19
Settings
Option menu . . . . . . . . . . . . . . . . . . . . . . . .20
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . . 26
Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Supplemental information . . . . . . . . . . . . . . 30
Specifications. . . . . . . . . . . . . . . . . . . . . . . . 31
≥About Firmware updates (>12)

Getting startedConnections & SettingsPlaybackSettingsReference
3
VQT4M33
Getting started
Unit and media care
∫Clean this unit with a soft, dry
cloth
≥Never use alcohol, paint thinner or benzine to
clean this unit.
≥Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
∫Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc handling precautions
≥Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal
or transfer, then follow the procedure to return all
the settings to the factory presets to delete the
user settings. (>26, “To return all settings to the
factory preset.”)
≥The operation history may be recorded in the
memory of this unit.
DO DO NOT

4VQT4M33
Playable media
≥See pages 5 and 31 for more information on the types of content that can be played.
Type Logo examples Type detail Playable contents
BD-Video Video
BD-RE Video, JPEG
BD-R Video, MKV
DVD-Video Video
DVD-R
Video, AVCHD
MKV, JPEG, FLAC,
MP3, WAV
DVD-R DL
DVD-RW
Video, AVCHD
— +R/+RW/+R DL
Music CD Music [CD-DA]
—CD-R
CD-RW
MKV, JPEG,
FLAC, MP3,
Music [CD-DA], WAV
—USB devices
(up to 2 TB)
MP4, MPEG, MKV,
JPEG, FLAC,
MP3, WAV
BD
DVD
CD
USB

Getting started
5
VQT4M33
∫Discs that cannot be played in
this unit
Any other disc that is not specifically
supported or previously described.
≥DVD-RAM
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥WMA discs
≥All types of DivX discs
≥PAL discs
≥HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder, etc. needs to be finalized
by the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫BD-Video
≥This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby®TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
≥If “Dolby D/Dolby D +/Dolby TrueHD” is set to
“PCM”, the maximum possible number of Dolby
sound is 2ch PCM. (>22)
∫Music CD
≥Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
≥The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
∫USB device
≥This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device charging.
≥FAT12, FAT16, FAT32 and NTFS file systems
are supported.
≥This unit supports USB2.0 High Speed.
≥This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized the
power to the HDD may not be supplied. Supply
power from an external source.

≥It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method and how the files were
created.
≥The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
Example:
24
1
ALL
1
Example:

6VQT4M33
Control reference guide
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV through
the unit’s remote control (Depending on the
TV these buttons may not work.).
[ Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Select audio (>15)
6 Basic playback control buttons (>15)
7 Show status messages (>16)
8 Show Pop-up menu/Top menu (>16)
9 Show Option menu (>20)
10 Colored buttons
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray (>13)
13 Show NETFLIX screen (>17)
14 Switch on/off Secondary Video
(Picture-in-picture) (>21)
15 Show Setup menu (>22)
16 Exit the menu screen
17 Show the selection screen of network
features (>17)
18 Show HOME menu (>13)
19 [3,4,2,1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (>15)
20 Return to previous screen
1Standby/on switch (Í/I) (>10)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Disc tray (>13)
3 USB port (>8,13)
4 Display (>30)
5 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20eup and down, 30eleft and
right
6 Stop (>15)
7 Start play (>15)
8 Open or close the disc tray (>13)
Rear panel terminals (>7–9)
1
2
3
6
4
5
7
8
19
10
920
18
16
15
17
14
13
12
11
1 8
2 3 4 6 75

7
VQT4M33
Getting startedConnections & Settings
Connections & Settings
STEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
≥Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥Do not connect video signals through a video recorder. Due to copy guard protection the picture may
not be displayed properly.
≥Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥Connect terminals of the same color.
STEP 2 : Connecting to an amplifier/receiver
≥Set “Digital Audio Output” (>22).
≥When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
HDMI AV OUT (High quality)
VIDEO OUT (Standard quality)
HDMI IN
HDMI cable
VIDEO IN
AUDIO IN
L
R
Audio/Video cable
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable HDMI cable

8VQT4M33
STEP 3 : Connecting to the network
The following services can be used when this unit is connected to broadband.
≥Firmware can be updated (>12)
≥You can enjoy BD-Live (>16)
≥You can enjoy Network Service (>17)
≥You can access other devices (Home Network) (>18)
For details about connection method, refer to the instructions supplied with the connected equipment.
For wireless capability, connect the Wireless LAN Adaptor DY-WL5 (optional). Only
DY-WL5 can be
used. Read the operating instructions for DY-WL
5 thoroughly when using it.
≥For up-to-date compatibility information on your wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support
≥The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Wireless LAN connection
LAN cable connection
Wireless router, etc. Internet
LAN Cable
Internet
Broadband router, etc.

Connections & Settings
9
VQT4M33
STEP 4 : Connecting to an AC power source
≥This unit consumes a small amount of AC power (>31) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
To a household AC outlet

10 VQT4M33
STEP 5 : Settings
After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1Press [Í].
Setup screen appears.
2Follow the on-screen instructions and
apply the settings.

≥You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. (>24)
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Select “Wired” and press [OK].
Follow the on-screen instructions to apply your
connection settings.
Preparation
≥Obtain your network name (>11, SSID).
≥If your wireless connection is encrypted,
please be sure that you know your
encryption key (password).
≥ If “Wireless LAN Adaptor is not connected.” is
displayed, check that the Wireless LAN Adaptor is
fully inserted. Alternatively, disconnect and reconnect
it. If there is still no change in the display, consult
your dealer for advice.
1Select “Wireless” and press [OK].
2Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions and apply the settings.
∫“WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected SetupTM), you can easily
perform the settings.
Easy Setting
Easy Network Setting
Wired connection
Wireless connection
Easy Network Setting
Wired
Wireless
Select a connection mode.
Current setting Wired
OK
RETURN
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)