Panasonic DMR-HWT250 User manual

SQT0993
Operating Instructions
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Model number suffix “EB” denotes UK model.
HDD Recorder
Model No. DMR-HWT250
DMR-HWT150
Software (Firmware) Update
To support the latest features, it’s very important you install the latest updates to
maintain proper operation of your unit.
For details, refer to “Software (Firmware) Update” (>66) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
until
2015/09/26
EB
DMR-HWT250_150EB_eng.book 1 ページ ２０１５年９月１４日 月曜日 午後１時５０分

SQT0993
2
Unit
• Do not place sources of naked flames, such as
lighted candles, on this unit.
• This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
• This unit is intended for use in moderate
climates.
Safety precautions
WARNING
Unit
• To reduce the risk of fire, electric shock or
product damage,
- Do not expose this unit to rain, moisture,
dripping or splashing.
- Do not place objects filled with liquids, such as
vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
AC mains lead
• To reduce the risk of fire, electric shock or
product damage,
- Ensure that the power supply voltage
corresponds to the voltage printed on this unit.
- Insert the mains plug fully into the socket
outlet.
- Do not pull, bend, or place heavy items on the
lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when
disconnecting the plug.
- Do not use a damaged mains plug or socket
outlet.
• The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
CAUTION
Placement
• Place this unit on an even surface.
• To reduce the risk of fire, electric shock or
product damage,
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
Batteries
• Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
• Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
- Do not mix old and new batteries or different
types at the same time.
- Do not heat or expose to flame.
- Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time with
doors and windows closed.
- Do not take apart or short circuit.
- Do not recharge alkaline or manganese
batteries.
- Do not use batteries if the covering has been
peeled off.
- Remove batteries if you do not intend to use
the remote control for a long period of time.
Store in a cool, dark place.
• When disposing of the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
DMR-HWT250_150EB_eng.book 2 ページ ２０１５年９月１４日 月曜日 午後１時５０分

SQT0993 3
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating of
5-ampere and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì
on the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the
type of AC mains plug (figures A and B). Confirm
the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse
cover.
Please check and identify the supplied
accessories.
(Product numbers are correct as of August 2015.
These may be subject to change.)
• Do not use AC mains lead with other equipment.
Insert batteries
Insert so the poles (i and j) match those in the
remote control.
Caution for AC Mains
Lead
Fuse cover
Figure A Figure B
Figure A Figure B Fuse
(5 ampere)
Fuse
(5 ampere)
Supplied accessories
Remote control (N2QAYB001058):1pc.
Batteries for remote control: 2 pcs.
AC mains lead (K2CT2YY00098):1pc.
RF coaxial cable (K2KYYYY00247):1pc.
HDMI cable (K1HY19YY0011):1pc.
About descriptions in these operating
instructions
• These operating instructions are applicable to models
DMR-HWT250 and DMR-HWT150. The illustrations in
these Operating Instructions show images of DMR-
HWT250 unless otherwise indicated.
•[HWT250] :
indicates features applicable to DMR-HWT250 only.
•[HWT150] :
indicates features applicable to DMR-HWT150 only.
• Pages to be referred to are indicated as “>±±”.
• Images are for illustration purpose, contents may change
without notice.
R6/LR6, AA
(Alkaline or manganese batteries)
DMR-HWT250_150EB_eng.book 3 ページ ２０１５年９月１４日 月曜日 午後１時５０分

SQT0993
4
Table of contents
Safety precautions . . . . . . . . . . . . . . . . . . . . 2
Caution for AC Mains Lead. . . . . . . . . . . . . 3
Supplied accessories . . . . . . . . . . . . . . . . . . 3
Getting started
HDD and media information . . . . . . . . . . . . 6
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control reference guide. . . . . . . . . . . . . . . 10
Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 12
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FUNCTION MENU screen . . . . . . . . . . . . 18
Watching broadcasts
Watching broadcasts . . . . . . . . . . . . . . . . . 19
Freeview Play . . . . . . . . . . . . . . . . . . . . . . . 22
Recording
Recording TV programmes. . . . . . . . . . . . 24
Timer recording. . . . . . . . . . . . . . . . . . . . . . 26
Playing back video
Playing titles on the HDD . . . . . . . . . . . . . 31
Playing titles on the media . . . . . . . . . . . . 33
Operation during play. . . . . . . . . . . . . . . . . 34
Editing video
Deleting/Editing titles . . . . . . . . . . . . . . . . . 37
Copying video
Copying titles. . . . . . . . . . . . . . . . . . . . . . . . 40
Photo and Music
Playing photos. . . . . . . . . . . . . . . . . . . . . . . 41
Editing photos . . . . . . . . . . . . . . . . . . . . . . . 43
Copying photos . . . . . . . . . . . . . . . . . . . . . . 44
Playing music . . . . . . . . . . . . . . . . . . . . . . . 45
Copying/Deleting music. . . . . . . . . . . . . . . 46
Network
Smart Home Networking (DLNA). . . . . . . 47
TV Anywhere. . . . . . . . . . . . . . . . . . . . . . . . 51
Enjoying Network Service . . . . . . . . . . . . . 51
With Other Equipment
Copying the HD Video (AVCHD) . . . . . . . 52
Registering
the external HDD (USB HDD) . . . . . . . . . 53
Convenient functions
VIERA Link functions . . . . . . . . . . . . . . . . . 54
Playback menu . . . . . . . . . . . . . . . . . . . . . . 55
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . 57
4K Networking. . . . . . . . . . . . . . . . . . . . . . . 66
Software (Firmware) Update . . . . . . . . . . 66
Other operations. . . . . . . . . . . . . . . . . . . . . 67
Troubleshooting
Troubleshooting guide. . . . . . . . . . . . . . . . 68
Reference
Specifications . . . . . . . . . . . . . . . . . . . . . . . 73
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
DMR-HWT250_150EB_eng.book 4 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
Watching broadcasts
Recording
Playing back video
Editing video
Copying video
Photo and Music
Network
With Other Equipment
Convenient functions
Troubleshooting
Reference
SQT0993 5
DMR-HWT250_150EB_eng.book 5 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
6
HDD and media information
Getting started
For more details, refer also to the specifications. (>73)
(–: Impossible)
• With certain recording states and folder structures, the play order may differ or playback may not be possible.
• It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the
recording method, and how the files were created.
Recordable/playable contents
Media type Standard symbol Playable contents Recordable contents
Built-in hard disk drive
(HDD) [HDD]
•Video
• AVCHD/AVCHD 3D
•MKV
•MP4
• MPEG2
• Xvid
•JPEG
• MPO (3D photo)
• AAC
•FLAC
•MP3
•WAV
•WMA
External hard disk drive
(USB HDD)
(>8)
[USB_HDD]
•Video
§1
• AVCHD/AVCHD 3D§2, 3
–
•MKV
•MP4
• MPEG2
• Xvid
• JPEG
•MPO
(3D photo)
• AAC
•FLAC
•MP3
•WAV
•WMA
USB memory [USB]
• AVCHD/AVCHD 3D§2, 3
–
•MKV
•MP4
• MPEG2
• Xvid
• JPEG
•MPO
(3D photo)
• AAC
•FLAC
•MP3
•WAV
•WMA
§1It cannot be recorded directly. (Only compatible with copying from the built-in HDD)
§2Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be
able to play back, add, or edit depending on the device.
§3It cannot be played back directly from the USB HDD or USB memory. Playback is possible by
copying to the built-in HDD. (>52)
The recording and playback of content on this or any other device may require permission from the
owner of the copyright or other such rights in that content. Panasonic has no authority to and does
not grant you that permission and explicitly disclaims any right, ability or intention to obtain such
permission on your behalf. It is your responsibility to ensure that your use of this or any other device
complies with applicable copyright legislation in your country. Please refer to that legislation for
more information on the relevant laws and regulations involved or contact the owner of the rights in
the content you wish to record or playback.
Indemnity concerning recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type of
problems that result in loss of recording or edited content (data), and does not guarantee any
content if recording or editing does not work properly. Likewise, the above also applies in a case
where any type of repair is made to the unit (including any other non-HDD related component).
DMR-HWT250_150EB_eng.book 6 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 7
∫Broadcast Recordings
Numbers of titles that can be recorded:
• Maximum numbers of titles are including recordings of
HD CAMCORDER.
∫HD CAMCORDER Recordings
MPEG-4 AVC/H.264 (based on AVCHD)
Numbers of titles that can be recorded:
• Maximum numbers of titles are including recordings of
Broadcast.
∫Photo files
Compatible pixels:
Between 34k34 and 8192k8192 pixels
Sub sampling: 4:2:2, 4:2:0
(Motion JPEG is not supported.)
Maximum numbers of contents:
∫Video files/Audio files
Numbers of contents that can be copied to
internal HDD:
USB device:
• Each folder can store up to 1000 files.
• We recommend that you limit the depth of
folder trees to about five levels.
• Bit rate up to 100 Mbps/resolution up to
3840k2160 25p/30p, 4096k2160 24p. (MP4
only)
• The video file and subtitle text files are inside the same folder, and the file names are the same except for the file extensions.
• Some files may not be played back even if they have these extensions.
Information about contents
Media Maximum
titles
HDD 3000
Media Maximum
titles
HDD 3000
Media Folders Files
HDD – 20000
USB device 500 10000
Contents Maximum numbers of
folders and files
Video 20000
Audio 20000
About extension of files
MKV: “.mkv”
Subtitle text files: “.srt” “.sub” “.txt”
MP4: “.mp4” “.mov”
MPEG2: “.mpg” “.mpeg” “.m2ts” “.mts” “.ts”
Xvid: “.avi”
Subtitle text files: “.srt” “.sub” “.txt”
JPEG: “.jpg”
MPO: “.mpo”
AAC: “.m4a”
FLAC: “.flac”
MP3: “.mp3”
WAV: “.wav”
WMA: “.wma”
DMR-HWT250_150EB_eng.book 7 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
8
HDD and media information
§1The SD quality programme cannot be converted to HD quality.
§2You cannot select during play whether it activates or deactivates.
§3You cannot select during play whether it appears or disappears.
Approximate recording times
Refer to “Recording modes and approximate recording times”. (>73)
You can use an external HDD (USB HDD) in the
following two ways (A single HDD cannot handle
those two ways simultaneously), and a USB
memory for data files.
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (>53)
• The USB HDD over 3 TB is not usable.
• For data files
Playing back MP4, JPEG, MP3, etc. in a
USB device with this unit.
• The USB device must be formatted in FAT12,
FAT16, FAT32 or NTFS file system.
• The USB device over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices.
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit supports USB mass storage device class.
• This unit does not guarantee connection with all USB
devices.
Recording mode
Recording Mode DR HG/HX/HE/HL/HM XP/SP/LP/EP
Feature Programmes can be
recorded in a nearly
perfect broadcasted state.
Recording can be done
with reduced recording
volume in High definition
(HD) quality§1.
Recording can be done
with reduced recording
volume in Standard
definition (SD) quality.
Multiple audio Record all multiple audio Record only one audio§2
Audio
Description
Can be recorded Can be recorded§2
Subtitles Can be recorded Can be recorded (only one subtitle)§3
Surround audio Surround audio as the
broadcast
Stereo audio
Notes
Notes for the USB device
DMR-HWT250_150EB_eng.book 8 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 9
Unit care
• If the HDD or USB HDD is damaged, the
recorded content cannot be recovered.
• The unit may breakdown if cigarette smoke
or bug spray/vapour, etc. gets inside the
unit.
1Switch the unit to standby mode.
((Í/I) will flash. Wait until it goes off.)
2Remove the AC mains lead from the
household mains socket.
3Move only after the unit has come to a
complete stop (approx. 3 minutes) in order to
avoid subjecting to vibration and shock. (Even
after the unit is switched to standby mode, the
HDD continues operating for a short time.)
The registration of the USB HDD may be
cancelled in the process of repairing this unit.
You can use the USB HDD again by
re-registering, but all recorded content already on
the USB HDD will be lost. In such cases, the
recorded content (data) cannot be recovered.
This unit may contain private information. Before
disposing of or transferring this unit, perform the
following to delete the data, including personal or
secret information:
- Format HDD (>59)
- Perform “Shipping Condition” (>65)
HDD/USB HDD handling care
• The HDD is a high precision recording
instrument and is easily susceptible to damage.
Therefore, be careful of the following points
while the unit is turned on, especially during
operation, otherwise the HDD and the recorded
content may be damaged:
- Do not subject the unit to any vibration and
shock.
- Do not remove the AC mains lead from the
household mains socket.
• The HDD is a temporary storage device
This unit cannot save (backup) the HDD titles to
media. You have to be very careful when
handling the unit and editing the title.
Setup precautions
• Do not place on anything that generates heat
like a Set Top Box, etc.
• Place in an area where condensation does
not occur. Conditions where condensation
may occur
- When there is an extreme change in
temperature.
In the above situation, without turning the unit
on, let the unit adjust to the room temperature
and wait 2–3 hours until condensation is gone.
When moving the unit
Cleaning
• Wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to
clean this unit.
• Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
When requesting this unit for repair
To dispose or transfer this unit
DMR-HWT250_150EB_eng.book 9 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
10
Control reference guide
Instructions for operations are generally described using the remote control.
1Transmit the remote control signal
• Point it at remote control signal sensor on
this unit. (>11)
2Switch the unit from on to standby mode or
vice versa
3Select drive (HDD or USB)
4Select channels and title numbers, etc./Enter
numbers or characters
5
Switch to the previously watched channel ( > 19)
6Basic operations for recording and play,
REWIND LIVE TV/PAUSE LIVE TV (>21)
7Show Information (>19, 32, 34)
8Selection/OK, Frame-by-frame (>34)
9Show Video Menu (>31)
:Show OPTION menu (>37, 43, 55)
;Colour buttons (red, green, yellow, blue)
(Use in accordance with instruction on the
screen.)
<Start recording (>24)
=
Select a recording mode/conversion mode (>24)
>Show the Timer Recording screen (>28)
?Create chapter (>35)
@Listen to Audio Description (>20, 35)
ASkip the specified time (>35)
BTV operation buttons (>14)
CChannel select (>19)/Change pages in the
Video Menu screen etc.
DShow the Freeview Play Catch Up Service
screen (>23)
EShow NETFLIX screen (>51)
FShow the Network Service screen (>51)
GExit the menu screen
HShow the TV Guide screen (>22)
IShow the FUNCTION MENU screen (>18)
JReturn to previous screen
KShow subtitles (>19, 35)
LShow Digital Teletext (>20)
MSwitching to the radio channel list (>19)
NTo delete unwanted recorded titles, timer
programmes, video, photo or music (>37)
OSkip approx. 1 minute forward (>34)
PSkip approx. 10 seconds backward (>34)
Remote control
STATUS
F
U
N
C
T
I
O
N
M
E
N
U
G
U
I
D
E
PLAY/x1.3
PAUSE
PAUSE LIVE TV
STOP
SLOW/SEARCH
SKIP
CH
PAGE
NET
CH
AV
INPUT

TV
DRIVE
SELECT

EXIT
OK
OPTION
VOL
0
2
abc
5
jkl
8
tuv
1
4
ghi
7
qrs
p
3
def
6
mno
9
xyz
w
DELETE
PROG/CHECK
TIME SLIP
RADIO/TV
-10s +60s
REC MODE
AD
REC TEXT STTL
CHAPTER
MANUAL SKIP
REWIND LIVE TV
LAST VIEW
BACK/
RETURN































SLOW/SEARCH
REWIND LIVE TV
LAST VIEW
DMR-HWT250_150EB_eng.book 10 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 11
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
3USB port
4Information LED1
• Flashes when a USB memory is inserted.
• Displays the various states of this unit.
(>72)
5Information LED2
• Flashes for approx. 20 seconds when DLNA
compatible equipment is connected to this
unit over the network (when this unit is used
as a server). (>47)
• Lights up during firmware update. (>66)
• Displays the various states of this unit.
(>72)
6Recording LED
• Lights up while recording.
• Flashes while recording is paused and
before recording starts.
7POWER LED/Remote control signal indicator
• Flashes when the power is turned on/off.
Wait for the LED to turn solid green before
using this unit.
• Flashes when this unit receives remote
control signals.
INFO REC





USB memory
DMR-HWT250_150EB_eng.book 11 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
12
Connection
3D programmes or 4K images can be played back when this unit is connected to 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Keep the RF coaxial cables as far away as possible from other cables.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
The HDMI-compliant cable is supplied with this unit.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (>73)
Basic connections
HDMI VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
(supplied)
To the aerial
Aerial cable
RF coaxial cable
(supplied)
Cooling fan
DMR-HWT250_150EB_eng.book 12 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 13
• When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (>61).
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
Network Service, TV Anywhere, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(>16, Easy Network Setting)
• Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
About wireless LAN connection (>16, Easy
Network Setting)
• For up-to-date compatibility information on your Wireless
router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• The unit is not compatible with public wireless LAN
services.
Amplifier/receiver connections
HDMI terminal
• You will not be able to view 3D programmes or 4K images
with this connection if your amplifier/receiver is not 3D or
4K compatible.
[HWT250]
DIGITAL AUDIO OUT terminal
HDMI cable
HDMI cable
(supplied)
Amplifier/
receiver
Amplifier/receiver
Coaxial cable
Network connection
LAN cable connection
Wireless LAN connection
Broadband
router, etc.
Internet
LAN (ethernet) cable
DMR-HWT250_150EB_eng.book 13 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
14
Settings
The TV can be operated from the TV operation
buttons of the remote control.
• Perform the setting if you cannot operate the TV
with the TV operation buttons.
While pressing [TV Í], enter the code with
the number buttons.
Manufacturer and Code No.
• If your TV brand has more than one code listed, select the
one that allows correct operation.
• If the brand of your TV is not listed or the code number is
invalid for your TV, this remote control is not compatible
with your TV.
1Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
Auto Setup starts.
(This operation may take some time.)
e.g.,
• If the region selection screen appears,
select repeatedly until you reach the
available region.
4Enter the PIN.
This PIN will be used only for the Owner
ID-Data Entry screen.
1 Press the number buttons to enter 4-digit
PIN.
2 Repeat step 1 to confirm.
• Make a note of PIN in case you forget it.
The PIN number cannot be reset.
• Steps 4 – 6 will be skipped in the Easy
Setting after “Shipping Condition”
(>65) is performed. (>go to step 7 on
page 15)
TV operation buttons
Manufacturer Code Manufacturer Code
AIWA 35
BENQ 58/59
BRANDT 10/15
CENTREX 66
CURTIS 05
DESMET 05
ELEMIS 05
FINLUX 61
Panasonic 01/02/03/04
AKAI 27/30
BEKO 05/71/72/73/74
BUSH 05
DAEWOO 64/65
DUAL 05
FERGUSON 10/34
FISHER 21
MITSUBISHI 05/19/20/47
METZ 05/28/79
MIVAR 24
NEC 36
NOKIA 25/26/27/60/61
OLEVIA 45
ORION 05
PHILCO 41/48/64
PHONOLA 05
PROVIEW 52
RADIOLA 05
NOBLEX 33
NORDMENDE 10
ONWA 30/39/70
PEONY 49/69
PHILIPS 05/06/46
PIONEER 37/38
PYE 05
SABA 10
FUJITSU 53
ITT
LG
GOLDSTAR 05/50/51
GRADIENTE 36
25
JVC 17/30/39/70
KOLIN 45
05/50/51
MAG 52
FUNAI 63/67
GOODMANS 05
GRUNDIG 09
IRRADIO 30
KDS 52
KONKA 62
HITACHI 05/22/23/40/41
SALORA 26
SANSUI 05
32/42/43/65/68SAMSUNG
SCHNEIDER 05/29/30
SELECO 05/25
SIEMENS 09
SONY 08
TELEFUNKEN 10/11/12/13/14
TOSHIBA 16/57
YAMAHA 18/41
05
WHITE
WESTINGHOUSE
SANYO 21/54/55/56
05/69/75/76/77/78 SEG
SINUDYNE 05
31/33/66/67/69TCL
TEVION 52
THOMSON 10/15/44
SHARP 18
Easy Setting
3Clock will be set automatically.
If the clock setting screen appears, set the
time manually (>65, Clock).
Progress
DVB Auto Setup
CH 21 60
CH
Free TV: 2 Pay TV: 0 Data: 0Radio: 0
Searching
Actual number of channels may differ due to channel duplication.
Quality
Type
Channel Name
RETURN
This will take about 3 minutes.
35 10
10
35
Free TV
Free TV
Owner ID
Please enter new PIN
PIN
0PIN entry 9
You now have the opportunity to enter your
details and help the police to crack crime.
See Instruction Book.
* * * *
RETURN
DMR-HWT250_150EB_eng.book 14 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 15
5Set the Owner ID-Data Entry (“NAME”,
“HOUSE NO” and “POSTCODE”).
e.g.,
1 Select the item, then press [OK].
2 Select the character, then press [OK].
Repeat this step.
3 Press [BACK/RETURN ].
4 Repeat steps 1-3 to enter all data.
5 Press [BACK/RETURN ] to exit from
the Owner ID-Data Entry screen.
6Enter the new PIN for parental control.
• The default PIN is “0000”.
1 Enter the new 4-digit PIN with the number
buttons.
• Make a note of the PIN you have
decided on in case you forget it.
2 Press [OK].
7Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
For details, refer to “Quick Start”. (>64)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
- Select “Yes” to set network settings.
- Select “No” to finish the Easy Setting.
To stop partway
Press [BACK/RETURN ].
To restart setup (>57, Auto Setup)
To display the Owner ID information on TV
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more than
5 seconds.
- The "INFO1" indicator on the unit will flash.
2Press [1] repeatedly until the "REC" indicator
on this unit lights up.
3 Press [OK] on the remote control.
The PIN is not displayed.
To change PIN for parental control
Refer to “PIN Entry”. (>65)
To change the region for Channel Sorting
Refer to “Channel Sorting by Region”. (>58)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Owner ID-Data Entry
NAME
HOUSE NO
POSTCODE
PIN 0000
RETURN
Change PIN
Select
0
Number 9
-
PIN Entry
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to “0000” by pressing “RETURN” when there is no
number input.
---
RETURN
DMR-HWT250_150EB_eng.book 15 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
16
Settings
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
Select “Wired” or “Wireless”, then press [OK].
“Wired” connection
Follow the on-screen instructions to apply your
connection settings.
“Wireless” connection
Before beginning wireless connection setup
• Obtain your network name (SSID§1).
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
Select “Search for wireless network” or “WPS
(PUSH button)” and press [OK], then follow the
on-screen instructions and apply the settings.
• If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
§1SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
§2The wireless router compatible with Wi-Fi Protected
SetupTM may have the mark.
Easy Network Setting
OK
RETURN
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Select “Wireless”.
Current setting : Wired
Wired
Wireless
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
- If your Network name is not displayed, search
again by pressing the red button on the remote
control.
- Stealth SSID will not be displayed. Enter
manually by using “Wireless Settings”. (>62)
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
of Wireless router.
2Press [OK].
※2
e.g.,
DMR-HWT250_150EB_eng.book 16 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993 17
To restart Easy Network Setting
1 Press [FUNCTION MENU]. (>18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Easy Network Setting” in “Network”,
then press [OK].
To redo settings individually
If “Easy Network Setting” did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [FUNCTION MENU]. (>18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Network Settings” in “Network”, then
press [OK].
4 Refer to “Network Settings”. (>62)
Check security before using Home Network
function
If you set “Home Network function” to “On”, all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorised access.
• Refer to the operating instructions of the hub or router.
• If you set “Home Network function” or “TV Anywhere” to
“On”, the setting for “Quick Start” is fixed to “On”.
• Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
• After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
• Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
DMR-HWT250_150EB_eng.book 17 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Getting started
SQT0993
18
FUNCTION MENU screen
You can easily access the desired functions, such
as playback, timer recording, the unit’s settings
etc. via the FUNCTION MENU.
1Press [FUNCTION MENU].
2Select the item, then press [OK].
• Freeview Play Catch Up (>23)
•TV Guide (>22)
• Timer Recording (>28)
• Network Service (>51)
• Contents on HDD
- Recorded Programmes (>31)
- Video ( AVCHD ) (>31)
- Video ( MP4 / Xvid / MKV ) (>32)
-Photo (>41)
-Music (>45)
• Home Network
- Miracast (>50)
- DLNA Client (>48)
- Media Renderer (>49)
- Wi-Fi Direct (>50)
•Setup
- Basic Settings (>57)
• You can change the unit’s settings of Tuning,
Sound, Display, Connection, Network etc.
- TV Anywhere (>51)
- Wallpaper
Personalize a background of the FUNCTION
MENU.
• To select from among “Photo”, register photo
in advance. (>42)
•Media
- USB device
- USB HDD
• Copy Video (>40)
RETURN
FUNCTION MENU
OK
TV Guide
Freeview Play
Catch Up
Home Network
Setup
Timer Recording
Contents on HDDNetwork Service
Media Copy Video
FUNCTION MENU list
DMR-HWT250_150EB_eng.book 18 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Watching broadcasts
SQT0993 19
Watching broadcasts
Watc hi ng
broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
If you have locked channels (>58, Child Lock
List), you may be asked to enter the PIN. In that
case, enter the 4-digit PIN with the number
buttons by following the on-screen instructions.
• PIN can be changed via “PIN Entry”. (>65)
While watching a programme
Press [STATUS ].
Channel information appears.
1Set timer (>29)
2Current Category
3Guidance information for parental control
(>58, Child Lock)
4HD simulcast programmes
5Audio Description
6Subtitle
7Digital teletext
8Multiple audio
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2,1].
To switch to another channel
Press [3,4], then press [OK].
When “STTL” appears in channel information
(
> left)
Press [STTL ].
• Press again to hide subtitle.
When “Multi Audio” appears in channel
information (
> left)
1Press [OPTION].
2Select “Multi Audio” in “Digital TV Menu”, then
press [OK].
3Select the desired audio.
• Press [EXIT ] to exit from the screen.
Press [CH WX] to select the channel.
• You can also select the channel by the
following operations.
- Using number buttons
- Using “TV Guide” (>22)
- Using channel information (>below)
If this unit requests a PIN
Using channel information
10:30
1
Now
ADMPEG
Change category
All DVB Channels
9:00 - 11:00
Set timer



SD>HD

STTL TEXT Multi Audio
G
e.g.,
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (>57)
To show subtitle
Switching audio
DMR-HWT250_150EB_eng.book 19 ページ ２０１５年９月１４日 月曜日 午後１時５０分

Watching broadcasts
SQT0993
20
Watching broadcasts
To use Hybrid Broadcast Broadband TV
application, perform network connection and
settings. (>13, 16)
• Set “HbbTV Setting” to “On”. (>58)
• Operations may vary depending on the broadcaster.
• On-screen instructions may not correspond to the remote
control buttons.
• It may take some time to show the data service.
• Some functions of the data service may be deactivated
during recording.
Audio Description adds an additional soundtrack
to describe events on screen (narration) and aids
understanding and enjoyment, particularly for
visually-impaired viewers.
When “AD” appears in channel information
(>19)
1Press [AD].
2 Select “Audio Description” and set to “Automatic”.
3Select “Volume”, then adjust the volume with
[2,1].
• Audio Description may not be available depending on the
type of audio format.
• When “Dolby Digital / Dolby Digital Plus”, “MPEG” or
“HE-AAC” is set to “Bitstream”, the Audio Description may
not work. Set them to “PCM” (>60, Digital Audio Output).
• You can also set “Audio Description” active in the Setup
menu. (>58)
When “TEXT” appears in channel information ( > 19)
1Press [TEXT ].
2Use [3,4,2,1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• Some functions of Digital teletext are deactivated during
recording.
• “Player PIN Control” applies access control for some MHEG
services. If you have locked viewing of Digital teletext (MHEG)
(
> 58, Player PIN Control), PIN is required to start viewing.
You can switch the aspect ratio of the screen. ( > 67)
To use data service (Hybrid Broadcast
Broadband TV)
To listen to the Audio Description
To show Digital teletext (MHEG)
Aspect
DMR-HWT250_150EB_eng.book 20 ページ ２０１５年９月１４日 月曜日 午後１時５０分