Panasonic AG-HPX500 User manual

Panasonic Broadcast
AG-HPX500
Menu Information

107
Viewfinder and LCD Menus
Chapter 7 Menu Operations
Chapter7Menu Operations
Viewfinder and LCD Menus
Using the menus
Use the setup menus to change the settings to suit the
scenes you are shooting or what you are recording.
• If the thumbnail menu is displayed, press the
THUMBNAIL button to release the display.
• The menu items indicated in the blue characters
cannot be used.
1 JOG dial button
2 MENU button
3 CURSOR buttons
4 SET button
1When the unit is in other than playback
or recording mode, press the MENU
button.
• The function screen appears in the viewfinder
and on the LCD screen.
PUSH MENU TO RETURN
2.CAMERA SETUP
3.SW MODE
4.RECORDING SETUP
5.AUDIO SETUP
6.OUTPUT SEL
7.DISPLAY SETUP
8.BATTERY SETUP
CAMERA MENU
1.SCENE FILE
2Use the JOG dial button (or the Up and
Down cursor buttons) to highlight the
function you want to change.
PUSH MENU TO RETURN
2.CAMERA SETUP
3.SW MODE
4.RECORDING SETUP
5.AUDIO SETUP
6.OUTPUT SEL
7.DISPLAY SETUP
8.BATTERY SETUP
CAMERA MENU
1.SCENE FILE
3Press the JOG dial button (or the SET
button) to display the items.
HIGH GAIN
W.BAL.PRESET
USER MAIN SPOTLIGHT
USER1
USER2
MID GAIN
SLOTSEL
6dB
12dB
3.2K
GAIN
PUSH MENU TO RETURN
SW MODE
1
2
4
2
3

108 Viewfinder and LCD Menus
Chapter 7 Menu Operations
4Use the JOG dial button (or the Up and
Down cursor buttons) to highlight the
item you want to change.
HIGH GAIN
W.BAL.PRESET
USER MAIN SPOTLIGHT
USER1
USER2
MID GAIN
SLOTSEL
6dB
12dB
3.2K
GAIN
PUSH MENU TO RETURN
SW MODE
5Use the JOG dial button (or the SET
button) to change the setting value.
HIGH GAIN
W.BAL.PRESET
USER MAIN
USER1
USER2
MID GAIN
SLOTSEL
6dB
12dB
3.2K
GAIN
PUSH MENU TO RETURN
SW MODE
5.6K
6To change other settings, repeat steps
4 and 5.
• When you finish, press the MENU button to
return to the function screen.
7To change other functions, repeat steps
2 to 5.
• To exit the function screen and return to the
normal screen, press the MENU button again.
Initializing the menu
settings
The menu settings contain both the user file settings
and the scene file settings. You can initialize them
separately.
To initialize the user file (i.e. all the
settings other than the scene file
settings)
Select INITIAL in USER FILE of the OTHER
FUNCTIONS screen. The current menu settings of
user file will return to the factory settings.
To initialize the scene file
From the 6 scene files, select the one you want to
initialize with the scene dial. Then in the SCENE FILE
screen, LOAD/SAVE/INIT, select INITIAL.
The settings for only the selected scene file are
returned to the factory settings.
• This does not effect the other scene files.

109
Setup menu structure
Chapter 7 Menu Operations
Setup menu structure
Camera (CAM) mode menu
CAMERA MENU
NAME EDIT
TC MODE
V DETAIL FREQ
PREREC MODE
SETUP
SYNCRO SCAN
DETAIL LEVEL
HIGH GAIN DETAIL CORING
W.BAL.PRESET CHROMA LEVEL
USER MAIN CHROMA PHASE
USER2 COLOR TEMP Bch
MASTER PED
480i (576i) REC MODE NEWS GAMMA
REC FUNCTION GAMMA
INTERVAL TIME
MATRIX
START DELAY SKIN TONE DTL
OPERATION TYPE
KNEE
ONE SHOT TIME
USER1 COLOR TEMP Ach
V DETAIL LEVEL
MID GAIN
SW MODE
FRAME RATE
ASPECT CONV
CAMERA SETUP
A.IRIS LEVEL
REC FORMAT
RECORDING SETUP
MARKER LIMITER CH3
SAFETY ZONE LIMITER CH4
DATE/TIME AUTO LEVEL CH3
LEVEL METER AUTO LEVEL CH4
ZOOM 25M REC CH SEL
FRONT VR CH2
LIMITER CH1
CARD/BATT TEST TONE
P2CARD REMAIN F.MIC POWER1
OTHER DISPLAY F.MIC POWER2
LCD BACKLIGHT R.MIC POWER
LCD SET F.MIC CH1 LEVEL
SELF SHOOT F.MIC CH2 LEVEL
DOWNCON MODE R.MIC CH1 LEVEL
DISPLAY ASPECT R.MIC CH2 LEVEL
MENU BACK HEADROOM
MONITOR MODE
MIC LOWCUT CH2
SDI METADATA
MIC LOWCUT CH3
SDI EDH
MIC LOWCUT CH4
TC VIDEO SYNCRO
MIC LOWCUT CH1CMPN/SDI SEL
OUTPUT SEL
LOAD/SAVE/INIT
SCENE FILE
LIMITER CH2
ZEBRA DETECT
DISPLAY SETUP
FRONT VR CH1
AUDIO SETUP
TC IN UB REGEN
UB MODE

110 Setup menu structure
Chapter 7 Menu Operations
ENDURA-D NEAR
BATTERY SELECT
HYTRON50 NEAR
EXT DC IN SEL
BATTERY SETUP
PROPAC14 NEAR
USER FILE
TRIMPAC14 NEAR
SD CARD FORMAT
BATTERY MODE
SCENE FILE
CARD FUNCTIONS
DIONIC90 NEAR
SHADING (USER)
DIONIC140 NEAR
CAC PROPERTY
NP-L7 NEAR
CAC DATA READ
ENDURA7 NEAR
CAC DATA DELETE
CAC DATA INIT ENDURA10 NEAR
IRIS ADJ
HYTRON140 NEAR
SHADING SELECT
LENS MODE
BP-GL65/95 NEAR
1394 CONTROL NICD14 NEAR
1394 CMD SEL
TYPE A FULL
ACCESS LED TYPE A NEAR
ALARM
TYPE B NEAR
TIME ZONE
NICD14 END
PC MODE
TYPE B END
LANGUAGE NEAR END CANCEL
GL SELECT
TYPE B FULL
CLOCK SET
TYPE A END
SAVE LED
PAG L95 NEAR
USER FILE
OTHER FUNCTIONS
FILTER
EXTENDER
WHITE
SHUTTER
GAIN
VF ! LED
GL PHASE
H PHASE
SYSTEM FREQ
MCR mode menu
RECORDING SETUP MCR FORMAT
480i (576i) MCR MODE
1394 UB REGEN
UB MODE
1394 TC REGEN
TC MODE
OTHER FUNCTIONS USER FILE
CLOCK SET
ACCESS LED
SAVE LED
TIME ZONE
SYSTEM FREQ
LANGUAGE
OUTPUT SEL CMPNT/SDI SEL
SDI METADATA
SDI EDH
DISPLAY SETUP
LEVEL METER
DATE/TIME
CARD/BATT
OTHER DISPLAY
LCD BACKLIGHT
LCD SET
DOWNCON MODE
DISPLAY ASPECT
MENU BACK
P2CARD REMAIN
PC MODE
ENDURA-D NEAR
BATTERY SELECT
HYTRON50 NEAR
EXT DC IN SEL
BATTERY SETUP
PROPAC14 NEAR
TRIMPAC14 NEAR
BATTERY MODE
DIONIC90 NEAR
DIONIC140 NEAR
NP-L7 NEAR
ENDURA7 NEAR
ENDURA10 NEAR
HYTRON140 NEAR
BP-GL65/95 NEAR
NICD14 NEAR
TYPE A FULL
TYPE A NEAR
TYPE B NEAR
NICD14 END
TYPE B END
NEAR END CANCEL
TYPE B FULL
TYPE A END
PAG L95 NEAR
MCR MENU