Panasonic HDCSDX1 - HD SD CAMCORDER User manual

Operating Instructions
High Definition Video Camera
Model No. HDC-SDX1
Before use, please read these instructions completely.
VQT2W75
until
2010/7/2
HDC-SDX1GC-VQT2W75_mst.book 1 ページ ２０１０年６月２１日 月曜日 午後３時１２分

2
VQT2W75
Information for Your Safety
Use only the recommended accessories.
≥Do not use any other AV multi cables and
USB cables except the supplied one.
≥Keep the Memory Card out of reach of
children to prevent swallowing.
∫Product identification marking
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE,
≥DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
≥USE ONLY THE RECOMMENDED
ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR
BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION!
≥DO NOT INSTALL OR PLACE THIS
UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.
≥DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF
NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY
MANNER.
The socket outlet shall be installed near the
equipment and easily accessible.
The mains plug of the power supply cord
shall remain readily operable.
To completely disconnect this apparatus
from the AC Mains, disconnect the power
supply cord plug from AC receptacle.
Warning
Risk of fire, explosion and burns. Do not
disassemble, heat above 60 oC or
incinerate.
Product Location
High Definition
Video Camera Battery holder
AC adaptor Bottom
HDC-SDX1GC-VQT2W75_mst.book 2 ページ ２０１０年６月２１日 月曜日 午後３時１２分

3
VQT2W75
-If you see this symbol-
∫About the recording format for
recording motion pictures
You can select from either AVCHD or MP4
recording formats to record motion pictures
using this unit. (l50)
AVCHD: You can record high definition
quality images with this format. It is suitable
for viewing on a large format TV or for
saving to disc.
MP4: This is a recording format suitable for
playing back or editing on a PC. It can be
processed faster than AVCHD when it is
imported to a PC.
∫Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit.
How to replace the fuse
The location of the fuse differ according
to the type of AC mains plug (figures A
and B).
Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC
mains plug.
1) Open the fuse cover with a
screwdriver.
2) Replace the fuse and close or attach
the fuse cover.
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid
in the European Union.
If you wish to discard
this product, please
contact your local
authorities or dealer and
ask for the correct
method of disposal.
HDC-SDX1GC-VQT2W75_mst.book 3 ページ ２０１０年６月２１日 月曜日 午後３時１２分

4
VQT2W75
∫Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
≥4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
≥Refer to page 15 for more details on SD
cards.
∫For the purposes of these
operating instructions
≥SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
≥Functions that can be used for motion
picture recording/motion picture playback
are indicated by in these
operating instructions.
≥Functions that can be used for still picture
recording (including the still picture
recording in motion picture recording
mode)/still picture playback are indicated
by in these operating
instructions.
≥Pages for reference are indicated by an
arrow, for example: l00
HDC-SDX1GC-VQT2W75_mst.book 4 ページ ２０１０年６月２１日 月曜日 午後３時１２分

5
VQT2W75
PreparationBasicAdvancedCopy/DubbingWith a PCOthers
Information for Your Safety.................... 2
Accessories............................................. 7
Preparation
Before using
[1] Parts identification and
handling ........................................ 8
Setup
[1] Power supply.............................. 11
Inserting/removing the battery ..... 12
Charging the battery .................... 13
Charging and recording time........ 14
[2] Recording to a card ................... 15
Cards that you can use with
this unit......................................... 15
Inserting/removing an SD card .... 16
[3] Turning the unit on/off ............... 17
Turning the unit on and off with the
power button ................................ 17
Turning the unit on and off with the
LCD monitor................................. 17
[4] Selecting a mode ....................... 18
[5] Adjusting LCD monitor.............. 19
How to use the touch screen ....... 19
Recording Yourself....................... 19
[6] Setting date and time................. 20
Basic
Recording/Playback
[1] Before recording ........................ 21
[2] Recording motion pictures ....... 22
[3] Recording still pictures ............. 24
Recording still pictures in motion
picture recording mode ................ 25
[4] Intelligent auto mode ................. 26
[5] Motion picture/Still picture
playback.......................................28
Setup
[1] Using the menu screen ............. 32
[2] Using the Setup Menu ............... 33
Advanced
Recording (Advanced)
[1] Zoom in/out function ................. 39
Extra optical zoom ....................... 39
[2] Image stabilizer function........... 40
Optical image stabilizer lock ........ 41
[3] AF/AE tracking ........................... 42
[4] Recording with the
video light................................... 43
[5] Recording functions of
operation icons ...........................44
Operation icons............................ 44
[6] Recording functions of
menus ..........................................49
[7] Manual recording....................... 63
White balance .............................. 64
Manual shutter speed/
iris adjustment.............................. 65
Manual focus adjustment............. 66
Playback (Advanced)
[1] Playback Operations ................. 67
Motion picture playback using
operation icon .............................. 67
Creating still picture from motion
picture .......................................... 68
Highlight&Time frame index......... 69
Repeat playback .......................... 69
Resuming the previous
playback....................................... 70
Zooming in on a still picture during
playback (Playback zoom)........... 70
[2] Various playback functions ...... 71
Playing back motion pictures/still
pictures by date ........................... 71
Face highlight playback/
Highlight playback/
Intelligent scene selection............ 72
Changing the playback setting and
playing back the slide show ......... 75
Contents
HDC-SDX1GC-VQT2W75_mst.book 5 ページ ２０１０年６月２１日 月曜日 午後３時１２分

6
VQT2W75
Editing
[1] Deleting scenes/still pictures ... 76
Dividing a scene to partially delete
(AVCHD) ...................................... 77
Dividing a scene to partially
delete (MP4) ................................ 78
Deleting personal information ...... 79
Protecting scenes/
still pictures .................................. 80
[2] DPOF setting .............................. 81
With a TV
[1] Watching Video/Pictures on
your TV.........................................82
Connecting with a HDMI
mini cable..................................... 85
Connecting with the AV
multi cable.................................... 85
[2] Playback using VIERA Link
(HDAVI Control™) ....................... 86
Copy/Dubbing
With this unit/other products
[1] Connecting a DVD burner to
copy to/play back a disc............ 88
Preparing for copying/
playing back ................................. 88
Copying to discs........................... 90
Playing back the copied disc........ 92
Managing the copied disc ............ 93
[2] Dubbing images onto other
video device ............................... 94
With a PC
Before using
[1] What you can do with a PC....... 95
End User License Agreement...... 97
[2] Operating environment ............. 98
Setup
[1] Installation ................................ 101
[2] Connecting to a PC.................. 103
About the PC display ................. 105
Using with a PC
[1] Starting HD Writer AE 2.6X..... 106
Reading the operating instructions
of the software applications ....... 106
[2] If using Mac .............................. 107
[3] To use as a camera for
Skype .........................................108
How to connect .......................... 109
Others
Indications
[1] Indications................................ 110
[2] Messages.................................. 113
About recovery........................... 114
Troubleshooting ................................. 115
Cautions for use ................................. 122
Optional accessories ......................... 128
About copyright.................................. 129
Recording modes/approximate
recordable time ................................... 130
Approximate number of recordable
pictures................................................ 131
HDC-SDX1GC-VQT2W75_mst.book 6 ページ ２０１０年６月２１日 月曜日 午後３時１２分

7
VQT2W75
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Jun. 2010. These may be subject to change.
Battery pack
VW-VBK180
AC adaptor
VSK0712
AC cable
AK2CT39A00002
BK2CQ29A00002
AHong Kong Special Administrative
Region of China and Saudi Arabia
BAreas Other than Hong Kong Special
Administrative Region of China, Saudi
Arabia
AV multi cable
K1HY12YY0004
USB cable
K1HY04YY0032
Stylus pen
VGQ0C14
CD-ROM
Software
CD-ROM
Operating Instructions
VFF0670
HDC-SDX1GC-VQT2W75_mst.book 7 ページ ２０１０年６月２１日 月曜日 午後３時１２分

8
VQT2W75
Preparation
Before using 1Parts identification and
handling
1 Power button [ ] (l17)
2 Delete/Video light button
[ /LIGHT] (l43, 76)
3 Intelligent auto/Manual button
[iA/MANUAL] (l26, 63)
4 Optical image stabilizer button
[ O.I.S.] (l40)
5 Recording start/stop button (l22)
6 Battery holder (l12)
7 HDMI mini connector [HDMI]
(l82, 86)
8 USB terminal [ ] (l89, 103, 109)
9 AV multi connector [AV MULTI]
(l82, 94)
≥Use the AV multi cable (only the supplied
cable).
10 Access lamp [ACCESS] (l16)
11 Card slot (l16)
12 SD card cover (l16)
13 Speaker
14 Lens cover opening/closing switch
When not using the unit, close the lens
cover to protect the lens.
≥Slide the opening/closing switch to
open/close the cover.
15 Lens cover
16 Built-in flash (l46)
17 Lens
18 Internal stereo microphones
19 Video light (l43, 62)
12 34
6
5
AV MULTI
12
7 8 9 10
11
13
17
16
19
15
14
18
HDC-SDX1GC-VQT2W75_mst.book 8 ページ ２０１０年６月２１日 月曜日 午後３時１２分

9
VQT2W75
20 LCD monitor (Touch screen) (l19)
≥It can open up to 90o.
≥It can rotate up to 180oAtowards the lens
or 90o B towards the opposite direction.
21 Menu button [MENU] (l32)
22 Adjust zoom buttons (l39)
23 Sub recording start/stop button
(l21)
≥This button functions in the same manner
as the recording start/stop button.
24 Tripod receptacle
25 Battery release lever [BATT] (l12)
20
22
21
23
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
24
25
HDC-SDX1GC-VQT2W75_mst.book 9 ページ ２０１０年６月２１日 月曜日 午後３時１２分

10
VQT2W75
26 Photoshot button [ ] (l24)
27 Zoom lever [W/T] (In motion picture
recording mode or still picture
recording mode) (l39)
Thumbnail display switch [ / ]/
Volume lever [sVOLr] (In playback
mode) (l30)
28 Mode switch (l18)
29 Status indicator (l17)
30 DC input terminal (l13)
≥Do not use any other AC adaptors except
the supplied one.
31 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1Flip the belt.
2Adjust the length.
3Replace the belt.
28
26
31
27
30
29
HDC-SDX1GC-VQT2W75_mst.book 10 ページ ２０１０年６月２１日 月曜日 午後３時１２分

11
VQT2W75
Preparation
Setup 1Power supply
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBK180/VW-VBK360.
≥The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only
batteries suitable for use with this unit are genuine Panasonic products and
batteries manufactured by other companies and certified by Panasonic. (Batteries
which do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
HDC-SDX1GC-VQT2W75_mst.book 11 ページ ２０１０年６月２１日 月曜日 午後３時１２分

12
VQT2W75
≥Press the power button to turn off the unit. (l17)
Install the battery by inserting it in the direction shown in the figure.
Inserting/removing the battery
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove
the battery while supporting the unit to
prevent it dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
ャモヵヵ
AInsert the battery until it clicks
and locks.

CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.
HDC-SDX1GC-VQT2W75_mst.book 12 ページ ２０１０年６月２１日 月曜日 午後３時１２分

13
VQT2W75
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥The battery can also be charged using a battery charger (VW-BC10E/EB; optional).
≥The battery will not be charged if the unit is turned on.
ADC input terminal
1Connect the AC adaptor to the DC input terminal.
2Connect the AC cable to the AC adaptor, then the AC outlet.
≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has
begun.
It will turn off when the charging is completed.
∫Connecting to the AC outlet
If you turn on the unit while charging with the AC adaptor, you can use the unit with power
supplied from the outlet.
≥If the status indicator flashes at a particularly fast or slow rate, refer to page 125.
≥We recommend using Panasonic batteries (l7, 14, 128).
≥If you use other batteries, we cannot guarantee the quality of this product.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit.

HDC-SDX1GC-VQT2W75_mst.book 13 ページ ２０１０年６月２１日 月曜日 午後３時１２分

14
VQT2W75
∫Charging/Recording time
≥Temperature: 25 oC/humidity: 60%RH
≥These times are approximations.
≥The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥The batteries heat up after use or charging. This is not a malfunction.
Charging and recording time
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
format
Recording
mode
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBK180
(optional)
[3.6 V/1790 mAh]
2h50min
AVCHD HA/HG/
HX/HE 1h55min 1h
MP4
1280 k720p 2h5min 1h5min
640k480p 2 h 10 min
960k540p 2h 1h
VW-VBK360
(optional)
[3.6 V/3580 mAh]
4h50min
AVCHD HA/HG/HX 3 h 55 min 2 h
HE 4h 2h5min
MP4
1280 k720p 4h15min 2h10min
640k480p 4 h 25 min 2 h 15 min
960k540p 4h10min 2h10min
Battery capacity indication
≥The display changes as the battery capacity reduces.
####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
≥The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
≥When using the AC adaptor or batteries made by other companies, the remaining battery
capacity will not be shown.
HDC-SDX1GC-VQT2W75_mst.book 14 ページ ２０１０年６月２１日 月曜日 午後３時１２分

15
VQT2W75
Preparation
Setup 2Recording to a card
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating*for
motion picture recording.
* The SD Speed Class Rating is the speed standard for successive writes.
≥Please confirm the latest information
about SD Memory Cards/SDHC Memory
Cards/SDXC Memory Cards that can be
used for motion picture recording on the
following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
≥When the write-protect
switch A on SD card is
locked, no recording,
deletion or editing will be
possible on the card.
≥Keep the Memory Card out of reach of
children to prevent swallowing.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC
memory card with other equipment, check the equipment is compatible with these memory
cards.
Cards that you can use with this unit
Card type Capacity Motion picture recording
Still
picture
recording
SD
Memory
Card
8 MB/16 MB Cannot be used.
Can be
used.
32 MB/64 MB/
128 MB/256 MB Cannot be guaranteed in operation.
512 MB/1 GB/
2GB
Can be used.
SDHC
Memory
Card
4GB/6GB/8GB/
12 GB/16 GB/
24 GB/32 GB
SDXC
Memory
Card
48 GB/64 GB
32
HDC-SDX1GC-VQT2W75_mst.book 15 ページ ２０１０年６月２１日 月曜日 午後３時１２分

16
VQT2W75
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
≥Face the label side Cin the direction
shown in the illustration and press it
straight in as far as it will go.
≥Press the centre of the SD card and then
pull it straight out.
3Securely close the SD card
cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the back of
the SD card.
≥Do not apply strong shocks, bend, or drop
the SD card.
≥Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
≥When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
≥Do not expose the terminals of the SD
card to water, garbage or dust.
≥Do not place SD cards in the following
areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or
electromagnetic waves occur
≥To protect SD cards, return them to their
cases when you are not using them.
≥About disposing of or giving away the SD
card. (l125)
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l37) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.



Access lamp [ACCESS] A
≥When this unit is accessing the SD
card, the access lamp lights up.
HDC-SDX1GC-VQT2W75_mst.book 16 ページ ２０１０年６月２１日 月曜日 午後３時１２分

17
VQT2W75
Preparation
Setup 3Turning the unit on/off
You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
Press the power button to turn on the unit.
AThe status indicator lights.
Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
∫To turn on the unit
AThe status indicator lights.
∫To turn off the unit
BThe status indicator goes off.
≥The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
≥In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
jWhen the unit is purchased
jWhen you have turned off the unit using the power button
Turning the unit on and off with the power button
Turning the unit on and off with the LCD monitor

To turn off the unit
Hold down the power button
until the status indicator
goes off.


HDC-SDX1GC-VQT2W75_mst.book 17 ページ ２０１０年６月２１日 月曜日 午後３時１２分

18
VQT2W75
Preparation
Setup 4Selecting a mode
Change the mode to recording or playback.
Operate the mode switch to change the mode to , or .
Motion picture recording mode (l22)
Still picture recording mode (l24)
Playback mode (l28, 67)
HDC-SDX1GC-VQT2W75_mst.book 18 ページ ２０１０年６月２１日 月曜日 午後３時１２分

19
VQT2W75
Preparation
Setup 5Adjusting LCD monitor
You can operate by directly touching the
LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied)
for detailed operation or if it is hard to
operate with your fingers.
∫Touch
Touch and release the touch screen to select
icon or picture.
≥Touch the centre of the icon.
≥Touching the touch screen will not operate
while you are touching another part of the
touch screen.
∫Drag
Move your finger while pressing on the touch
screen. Can be used during direct playback
and playback zoom.
∫About the operation icons
///:
These icons are used to switch the menu
and thumbnail display page, for item
selection and setting etc.
:
Touch to return to the previous screen
such as when setting menus
≥Do not touch the LCD monitor with hard
pointed tips, such as ball point pens.
≥Perform the touch screen calibration when
the touch is not recognised or wrong
location is recognised. (l37)
¬Change the mode to or .
Rotate the LCD monitor towards
the lens side.
≥ The image is horizontally flipped as if you
see a mirror image. (However the image
recorded is the same as a normal recording.)
≥Only some indications will appear on the
screen. When appears, return the
direction of the LCD monitor to normal
position and check the warning/alarm
indication. (l113)
How to use the touch
screen
Recording Yourself
HDC-SDX1GC-VQT2W75_mst.book 19 ページ ２０１０年６月２１日 月曜日 午後３時１２分

20
VQT2W75
Preparation
Setup 6Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to or .
1Select the menu.
2Touch the date or time to be
set, then set the desired value
using / .
ADisplaying the World time setting
(l33):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and
2039.
≥The 24-hour system is used to display the
time.
3Touch [ENTER].
≥The clock function starts at [00] seconds.
≥A message prompting for World time
setting may be displayed. Perform the
World time setting by touching the screen.
(l33)
≥Touch [EXIT] or press the MENU button to
complete the setting.
≥The date and time function is driven by a
built-in lithium battery.
≥When this unit is purchased, the clock is
set. If the time display becomes [- -], the
built-in lithium battery needs to be
charged. To recharge the built-in lithium
battery, connect the AC adaptor or attach
the battery to this unit. Leave the unit as it
is for approx. 24 hours and the battery will
maintain the date and time for approx.
6 months. (The battery is still being
recharged even if the unit is off.)
: [SETUP] #[CLOCK SET]
HDC-SDX1GC-VQT2W75_mst.book 20 ページ ２０１０年６月２１日 月曜日 午後３時１２分