Panasonic CQ-DF701W User manual

≥Please read these instructions carefully before using this product and save this manual for future use.
CD Player/Receiver with Dot Matrix LCD and CD Changer Control
Operating Instructions
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
SET/AUTO
• P
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
CQ-DF701W

9
E
N
G
L
I
S
H
CQ-DF701W
8
❐Use this Product Safely
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-
uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, manufactured with carefully selected components and assembled by people who take pride in
their work. Once you discover the quality, reliability, and value we have built into this product, you too will
be proud to be a member of our family.
When Driving
Keep the volume level low enough to be aware of
road and traffic conditions.
When Car Washing
Do not expose the product, including the speakers
and CDs, to water or excessive moisture. This
could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high
temperatures inside your car. Give the interior a
chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC,
negative ground battery system.
Disc Mechanism
Do not insert coins or any small objects. Keep
screwdrivers and other metallic objects away from
the disc mechanism and disc.
Use Authorized Servicenters
Do not attempt to disassemble or adjust this preci-
sion product. Please refer to the Servicenter list in-
cluding with this product for service assistance.
For Installation
This product should be installed in a horizontal po-
sition with the front end up at a convenient angle,
but not more than 30x.
≥Operating instructions .................................... 1
≥Installation hardware................1 set (➡page 28)
≥Power connector ............................................ 1
≥Remote control unit ........................................ 1
≥Lithium battery (CR2025)................................ 1
❐Components
このページは
繁体中国語のため
本社で作成しております。

E
N
G
L
I
S
H
2
CQ-DF701W 11
Remote Control Unit Preparation
E
N
G
L
I
S
H
1
CQ-DF701W
10
Features
Full-dot expressiveness <3D dot matrix display>
You can select an operation quickly because operation items are shown on the display. You can also enjoy vari-
ety of actions and direction.
Audio control functions
≥S•HDB (Super High Definition Bass) (➡page 14)
≥CD changer control (➡page 20)
Anti-theft removable face
You can remove the face plate when you leave your car. (➡page 33)
You can operate this unit by pressing buttons on the main unit and the remote control.
∫These instructions describe buttons that are concerned with operations as follows.
Example: Press [P. SET "]or [P. SET #]/["]or [#].
∫Some operations can be activated by pressing buttons only on main unit or remote control.
Those cases are described in the instructions.
Example: Press [D•M] on the main unit to select the preset station.
Battery Installation
Remove the battery holder.
Pull the holder by the position B while pushing posi-
tion A in the direction indicated by the arrow.
Install the battery on the battery holder.
Set a new battery properly with its (i) side facing up
as shown in the figure.
Insert the battery holder.
Push in the battery holder back into its original posi-
tion.
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
≥Battery type: Panasonic lithium battery (CR2025) (included)
≥Battery life: Approximately 6 months with normal use (at room temperature)
Back side
Lithium battery
(included)
Battery holder Position A
Position B
≥Do not disassemble or short the battery. Do not throw a battery into a fire.
≥Keep batteries away from children to avoid the risk of accidents.
≥Be careful to the local disposal rules when you dispose of batteries.
Caution:
≥Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
Before Reading these Instructions
[buttons on the main unit]/[remote control]
1
2
3
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
SET/AUTO•P
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
Point the remote control unit at
the main unit’s sensor (REMOTE).

E
N
G
L
I
S
H
4
CQ-DF701W 13
E
N
G
L
I
S
H
3
CQ-DF701W
12
General
Mute/Attenuator
ON: Press [MUTE].
OFF: Press again.
Decreasing volume range depends on setting.
(➡page 26)
Note:
≥When the power is switched on for the first time,
a demonstration message appears on the display.
To cancel this display, press [DISP].
Volume
["VOL]: Up
[#VOL]: Down
Setting range: 0 to 40
ACCON
Open/Close the Front Panel
OPEN: Press [OPEN] on the front panel.
CLOSE: Raise the panel by hand.
: No sound.
Cautions:
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not pinch your finger or hand in the front panel.
≥Do not insert foreign matter into the disc slot.
VOL
MENU
TUNE
SOURCE
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
D
• M
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
HDB
S•HDB
; / 1
PWR
CQ-DF701W
SET/AUTO•P
Radio
CD player
CD changer control
(When a CD is inserted.)
(When a CD changer is connected and
magazine is in the changer.)
Source
AUX-IN setting (When AUX-IN setting is activated.)
( page 26)
[MUTE]
[SOURCE]
(POWER)
[VOL "]
[VOL #]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
Power
Turn the key in the ignition until the accessory
indicator lights.
ON: Press [SOURCE] (PWR).
OFF: Press [SOURCE] (PWR) again for more
than 1 second.
≥After turning off the ignition key, a security
message is displayed, and the panel remov-
able alarm that reminds you to take the panel
is activated.
(When S-LED is set to ON ➡page 26)
1
Source
Press [SOURCE] (PWR) to change the source.
2
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
SET/AUTO•P
<
Note:
≥The sound level for each source is stored in
memory.
(For radio, one volume setting for AM, one
volume setting for all FMs)
: Decrease the volume to 1/10 .
Close

E
N
G
L
I
S
H
6
CQ-DF701W 15
E
N
G
L
I
S
H
5
CQ-DF701W
14
General (Continued)
Display Change
When Power is ON
Press [DISP].
Notes:
≥Set the spectrum analyzer pattern in a separate procedure. (➡page 24)
≥: Displays before adjusting the clock. (➡page 24)
Press and hold [DISP] for more than 2 seconds.
≥The audio indicator is displayed for 15 seconds and returns to the pre-
vious display.
≥When the indicator lights, the audio function (S•HDB/SUB•W) is now
activated.
Press [DISP] again to cancel.
Display and light off (when it is turned on.)
If you press a button, the light is turned on, the mode display
appears for 5 seconds, and the light is turned off again.
When Power is OFF
Press [DISP].
Mode display
Mode and spectrum analyzer display
Mode and clock display
Clock display
Display and light off
S•HDB
(Super High Definition Bass)
Especially for rock music, the bass-sound will be more
powerful.
Press [S•HDB] on the main unit to change the Super
High Definition Bass on.
Dimmer
(Display Brightness Setting Range)
Press [DIM] on the main unit to change the dimmer level.
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
SET/AUTO•P
[DISP]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
: Default
: The bass sounds of the speakers are
strongly emphasized.
: The bass sounds of the speakers are
moderately emphasized.
(The sounds of the subwoofer can
be heard clearly.)
: Bright
Default
: Medium
: Dark
Spectrum analyzer display
If you press a button, the mode and spectrum analyzer display
appear for 5 seconds.
Note:
≥When S•HDB is on, the indicator (S•HDB BOOM or TIGHT)
is shown on the audio indicator display. (➡page 15)

E
N
G
L
I
S
H
8
CQ-DF701W 17
E
N
G
L
I
S
H
7
CQ-DF701W
16
Radio
Band
Press [BAND] to change the band.
2
Radio Mode
Press [SOURCE] to change to the radio mode.
1
Tuning
[TUNE $]/[$]: Up
[TUNE %]/[%]: Down
Press and hold [TUNE $]or [TUNE %]/[$]or
[%] for more than 0.5 seconds, then release.
Seeking will start.
One-Touch Selection of a Preset Station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a sta-
tion in the preset
memory
Entering Numbers Directly from the Remote Control
Select a band and frequency (step 1, 2and 3on the previous page).
Press and hold [1] to [6] on the remote control for more than 2 sec-
onds to memorize.
1
2
3
Auto Preset
Memory
(AUTO•P)
Automatically save
strong stations in the
preset memory
Select a band (steps 1and 2 on the
previous page).
Press and hold [BAND] (AUTO•P) for
more than 2 seconds.
Note:
≥New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
Select a band (steps 1and 2on the previous page).
Press [P. SET "]or [P. SET #]/["]or [#]to select the preset
number for tuning in the preset station.
Entering Numbers Directly from the Remote Control
Press [1] to [6] on the remote control.
VOL
SET/AUTO•P
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
[SOURCE]
[%] [$]
(TUNE)
[1] to [6]
Preset button
[BAND]
["] [#]
(PRESET
MEMORY)
(SELECT)
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
FM1
FM2
FM3
Source
AM
Note:
≥Frequency setting can be performed even after selecting a preset num-
ber.
Select a band and frequency (steps 1, 2and 3on the previous
page).
Press and hold [P. SET "]or [P. SET #]/["]or [#]for more than
2 seconds until the preset number blinks.
Press [P. SET "]or [P. SET #]/["]or [#]to select a preset num-
ber.
Press and hold [P. SET "]or [P. SET #]/["]or [#]for more than
2 seconds to memorize.
Direct Memory
Your favorite radio station can be memorized in
[D•M] on the main unit.
Default: FM 87.50 MHz
Memorize
Recalling the Direct Memory
Select a band and frequency (steps 1, 2and
3).
Press and hold [D•M] for more than 2 seconds.
Frequency blinks once and is saved in the mem-
ory.
Press [D•M].
1
2
Scanning:
Radio mode display
Press [D•M] again to cancel and return to the previ-
ous source.
Note:
≥You can recall the direct memory when the power
is off.
FM stereo indicator
1
2
≥The display blinks once, and a re-
ceiving station is saved in the
memory. Preset number
≥The 6 strongest available stations will be automatically saved in the
memory under preset number 1to 6.
≥Once set, the preset stations are sequentially scanned for 5 seconds
each.
≥Press [P. SET "]or [P. SET #]/["]or [#]for the broadcast you
want to listen to.
(Press [1] to [6] on the remote control.)
1
2
1
2
4
Note:
≥The new station is overwritten on existing saved
stations after following this procedure.
3

: Repeat the current track.
: Cancel
E
N
G
L
I
S
H
10
CQ-DF701W 19
E
N
G
L
I
S
H
9
CQ-DF701W
18
CD Player
Notes:
≥Do not insert a disc when this indicator
lights.
≥Loading a CD when the power is off allows the
power to be turned on.
≥Ejecting the CD when the unit is in the CD player
mode allows the power to be turned off.
Track Selection
[TRACK 5]/[$]: Next track.
[TRACK 6]/[%]: Beginning of the current track.
Previous track (Press twice.)
CD Player Mode
Press [SOURCE] to change to CD player mode and
playback starts.
Open the front panel.
Press [OPEN] on the front panel.
1
Insert the disc.
Close the front panel manually.
Playback will start automatically.
2
Pause
Press [BAND] ([ [ /1) during CD playing.
Press [BAND] ([ [ /1) again to cancel.
Cautions:
≥Only 12 cm CD is available for this unit.
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not use irregularly shaped CDs (heart-shaped, octagon, etc.).
≥Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the disc slot.
Menu Setting on CD Player Mode
Press [MENU]/[SEL] (MENU) during CD playing.
Press [P. SET "]or [P. SET #]/["]or [#]to select a submenu.
Press [BAND] (SET) to change the setting.
1
2
3
Notes:
≥Operations except setting should be performed after returning to the mode display.
≥The display returns to the previous one with no operation for 15 seconds after changing to the menu display.
≥Press [DISP] to return to the regular mode.
Play Setting
Random Play Select
RAND
: All the available tracks plays in a random se-
quence.
: Cancel
Scan Play Select
SCAN
: The first 10 seconds of each track plays in
sequence.
: Cancel
Repeat Play Select
REP
Direct setting on the remote control when the menu is not displayed:
ON
OFF
ON
OFF
SOURCE
D • M
Q-DF701W
OPEN
DISP
MOSFET 50W X 4
PWR
[DISP]
SET/AUTO•P
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
[5] (SCAN)
[%] [$] (TRACK)
[4] (RAND)
[BAND]
["] [#]
(MENU SELECT)
[6] (REP)
[SEL] (MENU)
[DISP]
[SOURCE]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
Listening to a CD
Disc Insert and Playback
Stop and Disc Eject
Press [<] (EJECT) to stop CD play and eject the disc.
Random Play Press [4] (RAND). Press again to cancel.
Scan Play Press [5] (SCAN). Press again to cancel.
Repeat Play Press [6] (REP). Press again to cancel.
ON
OFF
<
(EJECT)
<
Label side
Close
CD player mode display
CD player menu display
≥Lights when the disc is loaded.
≥Blinks when the disc is played.
Play setting
Track Search
Press and hold.
[TRACK 5]/[$]: Fast forward
[TRACK 6]/[%]: Fast backward
Release to resume the regular play.
When CD is in the player
Press [SOURCE] to change to CD player mode.

E
N
G
L
I
S
H
12
CQ-DF701W 21
E
N
G
L
I
S
H
11
CQ-DF701W
20
CD Changer
Caution:
≥Do not use irregularly shaped CDs (heart-
shaped, octagon, etc.).
CD changer functions are designed for optional Panasonic CD changer unit.
Preparation:
≥Connect the CD changer, and load a magazine (disc).
Notes:
≥Loading a magazine when the power is off allows the power to be turned on.
≥Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off.
≥Pausing does not function in the CD changer mode.
Track Selection
[TRACK 5]/[$]: Next track.
[TRACK 6]/[%]: Beginning of the current track.
Previous track (Press twice.)
Track Search
Press and hold.
[TRACK 5]/[$]: Fast forward
[TRACK 6]/[%]: Fast backward
Release to resume the regular play.
CD Changer Mode
Press [SOURCE] to change to CD changer mode
and playback starts.
Note:
≥: Load a magazine
with CDs.
1
Disc Selection
[DISC "]/["]: Next disc.
[DISC #]/[#]: Previous disc.
Menu Setting on CD Changer Mode
Press [MENU]/[SEL] (MENU) during CD changer playing.
Press [P. SET "]or [P. SET #]/["]or [#]to select a submenu.
Press [BAND] (SET) to change the setting.
1
2
3
Notes:
≥Operations except setting should be performed after returning to the mode display.
≥The display returns to the previous one with no operation for 15 seconds after changing to the menu display.
≥Press [DISP] to return to the regular mode.
Play Setting
Random Play
Select
RAND
: All the available tracks on all discs in the maga-
zine plays in a random sequence.
: Cancel
Select
D•RAND
: All the available tracks on the current disc plays
in a random sequence.
: Cancel
Scan Play
Select
SCAN
: The first 10 seconds of each track on the discs
plays in sequence.
: Cancel
Select
D•SCAN
: The first 10 seconds of the first track of all the
discs in the magazine plays in sequence.
: Cancel
Repeat Play
Select
REP
: Repeat the current track.
: Cancel
Select
D•REP
: Repeat the current disc.
: Cancel
Direct setting on the remote control when the menu is not displayed:
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Change the CD Changer Unit
Press [BAND] (CH•C !@) to select the CD chang-
er 1 or 2 mode.
CD-CH1: CD changer 1 mode
CD-CH2: CD changer 2 mode
[DISP]
SET/AUTO•P
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH • C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
[5] (SCAN)
[%] [$] (TRACK)
[4] (RAND)
[BAND]
["] [#]
(DISC/MENU
SELECT)
[6] (REP)
[SEL] (MENU)
[DISP]
[SOURCE]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
Random Play Press [4] (RAND). Press again to cancel.
Disc Random Play Press and hold [4] (RAND). Press and hold again to cancel.
Scan Play Press [5] (SCAN). Press again to cancel.
Disc Scan Play Press and hold [5] (SCAN). Press and hold again to cancel.
Repeat Play Press [6] (REP). Press again to cancel.
Disc Repeat Play Press and hold [6] (REP). Press and hold again to cancel.
ON
OFF
CD changer menu display
CD changer mode display
2
Play setting
≥Lights when the changer (maga-
zine) is connected.
≥Blinks when the disc is played.

E
N
G
L
I
S
H
14
CQ-DF701W 23
E
N
G
L
I
S
H
13
CQ-DF701W
22
Audio Settings
Bass and Treble
You can adjust the bass and treble
sound.
Default: BAS (Bass) 0 dB
TRE (Treble) 0 dB
Setting range: j12 dB to i12 dB
by 3 dB step
Subwoofer Level
When the subwoofer is activated, you
can change the subwoofer volume level.
Default: 4
Setting range: 0 (MUTE) to 8
Cut-off Frequency Control
The maximum lower frequency level can
be adjusted to match your subwoofer and
the acoustics inside your car.
Default: 120 Hz
Setting range: 120 Hz/80 Hz
Press [MENU]/
[SEL] (MENU) to select
“AUDIO”on the menu
display.
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
BAS/TRE
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
BAL/FAD
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
SUB WOOFER
Notes:
≥Operations except setting should be performed after
returning to the mode display.
≥The display returns to the previous one with no op-
eration for 15 seconds after changing to the menu
display.
≥Press [DISP] to return to the regular mode.
BAS (Bass) TRE (Treble)
[P. SET "]/["]: Increase the bass.
[P. SET #]/[#]: Decreases the bass.
[P. SET "]/["]: Increases the treble.
[P. SET #]/[#]: Decreases the treble.
BAL (Balance) FAD (Fader)
[TUNE $]/[$]: Right enhanced.
[TUNE %]/[%]: Left enhanced.
[P. SET "]/["]: Front enhanced.
[P. SET #]/[#]: Rear enhanced.
Press [BAND] (SET) to set.
Press [BAND] (SET) to set.
SET/AUTO•P
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH•C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
[BAND] (SET)
[TUNE %] [TUNE $]
(BAS/TRE/BAL/FAD/
LEVEL/LPF)
[P.SET "] [P.SET #]
(MENU SELECT)
[MENU] [DISP]
[%] [$]
(BAS/TRE/BAL/
FAD/LEVEL/LPF)
[BAND] (SET)
["] [#]
(MENU
SELECT)
[SEL] (MENU)
[DISP]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
Balance and Fader
You can adjust the sound balance among
the front, rear, right and left speakers.
Default: BAL (Balance) Center
FAD (Fader) Center
Setting range: 15 levels each
Press [TUNE $]or [TUNE %]/[$]or [%]to select BAS or TRE.
LEVEL
LPF
[TUNE $]/[$]: Increase the level.
[TUNE %]/[%]: Decrease the level.
Press [TUNE $]or [TUNE %]/[$]or [%]to select
120 Hz or 80 Hz.
Press [BAND] (SET) to set.
Press [BAND] (SET) to set.
Press [P. SET "]or [P. SET #]/["]or [#]to select LEVEL or LPF.
12 3
Audio menu display
Menu Submenu Setting
Regular mode
display
AUDIO
PICTURE
FUNCTION
Note:
≥When subwoofer level is set 0, the indicator
(SUB•W) is not shown on the audio indicator
display. (➡page 15)

Press [P. SET "]or
[P. SET #]/["]or [#]
to select
CLOCK-ON
E
N
G
L
I
S
H
16
CQ-DF701W 25
E
N
G
L
I
S
H
15
CQ-DF701W
24
Picture (Display) Settings
Spectrum Analyzer (S•A)
Display Pattern
Default: Pattern A
Variety: 6 types
Contrast
Allows you to adjust the display contrasts
for better viewing.
Default: Level 3
Setting range: Level 1 to level 5
Clock on the Mode Display
Default: ON
(“--:--”will appear before adjust-
ing the clock.)
Clock Adjustment
(12 hour system)
Default: Not adjusted.
Press [MENU]/
[SEL] (MENU) to select
“PICTURE”on the
menu display.
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
S•A PATTERN
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
CONTRAST
Press [P. SET "]or
[P. SET #]/["]or [#]
to select
Press [BAND] (SET) to
set.
CLOCK ADJ
Press [TUNE $]or [TUNE %]/[$]or [%]to select the pattern.
[TUNE $]/[$]: level up
[TUNE %]/[%]: level down
A
B
: Display showing a cube that continues to
change
: Display showing a globe that continues
to change
: Display showing a flower or doll pattern
Press [BAND] (SET) to set.
Note:
≥Change the display to show the spectrum analyzer display. (➡page 15)
C
D: Display showing a bird flapping its wings
: Display showing the image of a circuit
: Standard spectrum analyzer display
(9 bands)
ON
OFF
: Clock display ON
: Clock display OFF
Hour/Minute Switch Hour/Minute Adjustment
[TUNE %]/[%]: The hour display high lights.
[TUNE $]/[$]: The minutes display high lights.
Press [BAND] (SET) to set.
[P. SET "]/["]: Put forward hour/minute.
[P. SET #]/[#]: Put back hour/minute.
Notes:
≥Operations except setting should be performed after
returning to the mode display.
≥The display returns to the previous one with no op-
eration for 15 seconds after changing to the menu
display.
≥Press [DISP] to return to the regular mode.
VOL
MENU
TUNE
SOURCE
D • M
CQ-DF701W
CD RECEIVER WIITH FULL DOT MATRIX DISPLAY
DIM
OPEN
TRACK
DISC
P • SET
BAND
REMOTE
MUTE
DISP
CH•C
!@
MOSFET 50W X 4
S•HDB
HDB
; / 1
PWR
[BAND] (SET)
[TUNE %] [TUNE $]
(S A PATTERN/
CONTRAST/CLOCK ADJ)
[P.SET "] [P.SET #]
(MENU SELECT/CLOCK ADJ)
[MENU] [DISP]
•
SET/AUTO•P
[%] [$]
[BAND] (SET)
[SEL] (MENU)
[DISP]
SEL
Car Audio
SOURCE
POWER
VOL
MENU
DISPMUTE
2
4
6
RAND
REP
1
3
5
SCAN
BAND
(S A PATTERN/
CONTRAST/
CLOCK ADJ)
•
["] [#]
(MENU
SELECT/
CLOCK ADJ)
Press [BAND] (SET) to set.
Display menu display
E
STD
CLOCK-OFF
Clock display
1Menu 2Submenu 3Setting
Regular mode
display
AUDIO
PICTURE
FUNCTION
Press [BAND] (SET)
to select