Panasonic KX-TG7200E User manual

PQQW15742ZA DC0407DS0
Connections
Important:
LIf you use a telephone line cord which is not supplied, the unit may not work
properly.
To telephone line
USE ONLY the supplied cord.
USE ONLY the supplied AC adaptor.
Base unit
To AC mains outlet
(220–240 V, 50 Hz)
“Click”
Hook
Press plug firmly.
To AC mains outlet
(220–240 V, 50 Hz)
(KX-TG7202/KX-TG7203/KX-TG7222/KX-TG7223/KX-TG7224)
USE ONLY the supplied AC adaptor (smaller).
Charger
Press plug firmly.
Hooks
Digital Cordless Phone
Model No. KX-TG7200E/KX-TG7202E
KX-TG7203E
Digital Cordless Answering System
Model No. KX-TG7220E/KX-TG7222E
KX-TG7223E/KX-TG7224E
Quick Guide
TG7200_7220E(e)_QG.fm Page 1 Tuesday, May 15, 2007 9:42 AM

– 2 –
Battery installation/Battery charge
Initial charge: 7 hours
Note:
LUSE ONLY rechargeable Ni-MH batteries.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Operating tips
Using the navigator key
Press {^}, {V}, {<}, or {>}to navigate
through menus and to select items shown
on the display.
Adjusting the receiver or speaker
volume (?)
Press {^} or {V} while on a call.
Date and time
1{j/OK}
2Press {^} or {V} to select “Handset Setup”. i{>}
3Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203
Press {^} or {V} to select “Set Date & Time”. i{>}
NKX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224
Press {^} or {V} to select “Time Settings”. i{>}iPress {^} or {V} to
select “Set Date & Time”. i{>}
4Enter the current date, month, and year.
5Enter the current hour and minute.
6{j/OK}i{ih}
Base unit
*1
Charger
*2
*1 The pictured model is KX-TG7200.
*2 KX-TG7202/KX-TG7203/KX-TG7222/
KX-TG7223/KX-TG7224
Rechargeable
Ni-MH ONLY
“Charging”will
be displayed.
{V}
{^}
{<}{>}
TG7200_7220E(e)_QG.fm Page 2 Tuesday, May 15, 2007 9:42 AM

– 3 –
Basic operations
CMaking/Answering calls (Handset)
Making calls Dial the phone number. i{C}/{s}
Answering calls {C}/{s}
Hanging up {ih}
Receiver/speaker volume Press {^} or {V} while on a call.
Making a call using the redial
list
{R} i{^}/{V}: Select the desired number. i
{C}
Handset ringer volume 1{j/OK}
2{^}/{V}: “Handset Setup”i{>}
3{^}/{V}: “Ringer Setup”i{>}
4{^}/{V}: “Ringer Volume”i{>}
5{^}/{V}: Select the desired volume. i{>}i
{ih}
kPhonebook (Handset)
Adding entries (names and
phone numbers)
1{k} i{j/OK}
2{^}/{V}: “New Entry”i{>}
3Enter the party’s name (16 characters max.). i
{j/OK}
4Enter the party’s phone number (24 digits max.).
i{j/OK}
5{^}/{V}: “Save”i{>}i{ih}
LTo enter a name, see the character table in the
operating instructions.
Making calls 1{k}
2{^}/{V}: Select the desired entry. i{C}
IAnswering system (Base unit):
KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224
Answering on/off Press {s}to turn on/off the answering system.
Listening to messages {6}
TG7200_7220E(e)_QG.fm Page 3 Tuesday, May 15, 2007 9:42 AM

– 4 –
Frequently asked questions
Question Cause & solution
Why is wflashing? LThe handset is too far from the base unit. Move
closer.
LThe base unit AC adaptor is not connected.
Check the connections.
LYou are using the handset or base unit in an area
with high electrical interference. Place the
handset and base unit away from interference
sources, such as antennas and mobile phones.
LThe handset is not registered to the base unit.
Register it (page 6).
What should I do when the
handset does not turn on?
LMake sure that the batteries are installed
correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
How long is the battery
operating time?
LWhen you are using fully-charged Ni-MH batteries
(supplied batteries);
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.
LIt is normal for batteries not to reach full capacity
at the initial charge. Maximum battery
performance is reached after a few complete
cycles of charge/discharge (use).
LActual battery performance depends on a
combination of how often the handset is in use
and how often it is not in use (standby).
Can I keep the handset on
the base unit or charger
when I am not using it?
LEven after the handset is fully charged, the
handset can be left on the base unit or charger
without any ill effect on the batteries.
When should I replace the
batteries?
LIf the batteries are fully charged until 5 is
displayed, but
7 is displayed after a few calls,
replace the batteries with new ones.
What is a PIN? LThe PIN is a 4-digit number that must be entered
in order to change certain base unit settings. The
default PIN is “0000”.
What do I need to do to
display caller information?
LYou need to subscribe to Caller ID service.
Consult your service provider/telephone company
for details.
LThe message “You must first subscribe
to Caller ID.” will be displayed until you
receive caller information after subscribing to
Caller ID service.
TG7200_7220E(e)_QG.fm Page 4 Tuesday, May 15, 2007 9:42 AM

– 5 –
What should I do when:
– I hear static or sound cuts
in and out?
– there is interference from
other electrical units?
LPlace the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with
DSL service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
What should I do when the
operating time seems to be
short even after I fully
charged the batteries?
LWipe the battery ends (S, T) and the unit
contacts with a dry cloth.
What do I need to do to
erase the missed call
number (for example,
“3 Calls”) from the
display?
LThere are unviewed missed calls remaining. View
them using the following method.
1{j/OK}
2{^}/{V}: “Caller List”i{>}
3Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
Frequently asked questions
TG7200_7220E(e)_QG.fm Page 5 Tuesday, May 15, 2007 9:42 AM

– 6 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1{j/OK}
2{^}/{V}: “Handset Setup”i{>}
3{^}/{V}: “Registration”i{>}
4{^}/{V}: “Register H.set”i{>}
5Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203
Press and hold {x} on the base unit for
about 5 seconds. (No registration tone)
NKX-TG7220/KX-TG7222/KX-TG7223/
KX-TG7224
Press and hold {x} on the base unit for
about 5 seconds, until the registration tone
sounds.
6Wait until “Enter Base PIN”is displayed.
iEnter the base unit PIN (default: “0000”).
i{j/OK}
{j/OK}
{x}
{x}
{j/OK}
TG7200_7220E(e)_QG.fm Page 6 Tuesday, May 15, 2007 9:42 AM

– 7 –
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
– display caller information
Sales and support information
Customer Care Helpline Tel. No.: U.K. 0844 844 3898 / R.O.I. 01289 8333
012345
Customer Care Centre
LFor customers within the UK: 0844 844 3898
LFor customers within the Republic of Ireland: 01289 8333
LVisit our website for product information: www.panasonic.co.uk
LE-mail: [email protected]
Direct Sales at Panasonic UK
LOrder accessory and consumable items for your product with ease and
confidence by phoning our Customer Care Centre Monday - Thursday 9:00am -
5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).
LOr go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
LMost major credit and debit cards accepted.
LAll enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
LIt couldn’t be simpler!
LAlso available through our Internet is direct shopping for a wide range of finished
products, take a browse on our website for further details.
TG7200_7220E(e)_QG.fm Page 7 Tuesday, May 15, 2007 9:42 AM

IMPORTANT
If you have problems setting up
or operating this product please
call the Panasonic DECT Helpline
0844 844 3898 (UK)
01289 8333 (Repl of Ireland)
TG7200_7220E(e)_QG.fm Page 8 Tuesday, May 15, 2007 9:42 AM