Panasonic KX-TG9371 User manual

PNQW1009ZA DM1207PN0
Setting up
*1 KX-TG9372
CHARGE FOR
ABOUT 7 HOURS
Handset
Charger
*1
(120 V AC, 60 Hz)
Confirm
“Charging”is
displayed.
LUse only the supplied
Panasonic AC adaptor
PQLV209.
Base unit
LUse only the supplied Panasonic AC
adaptor PQLV207.
LUse only the supplied telephone line cord.
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter
(For DSL/ADSL
service users)
“Click”
Hook
Press plug
firmly.
Rechargeable Ni-MH ONLY
LUSE ONLY Ni-MH batteries AAA (R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
LEnsure correct polarities (S, T) when
installing the batteries.
Model No. KX-TG9371
KX-TG9372
Quick Guide
TG9361_QG(e).fm Page 1 Wednesday, December 26, 2007 7:26 PM

– 2 –
Operating tips
Using the navigator key
The handset navigator key can be used to
navigate through menus and to select items
shown on the display by pressing {^}, {V},
{<}, or {>}.
To adjust the receiver or speaker volume,
press {^} to increase the volume, or press {V}
to decrease the volume repeatedly while
talking.
Soft keys
The handset features 2 soft keys. By pressing
a soft key, you can select the feature shown
directly above it on the display.
{Select}, {Save}, {OK}, and additional other
functions are assigned to soft keys. Pay
attention to soft keys to find functions you
need during handset operation.
Date and time (Handset)
1{MENU}i{#}{1}{0}{1}
2Enter the current month, date, and year.
3Enter the current hour and minute (12-hour clock format).
4{AM/PM}: Select “AM”or “PM”. i{Save}i{OFF}
For further information, visit http://www.panasonic.com/help or refer to operating
instructions.
{V}
{^}
{<}{>}
Volume down
Volume up
View Phone
K CID book L
TG9361_QG(e).fm Page 2 Wednesday, December 26, 2007 7:26 PM

– 3 –
Basic operations
Making/Answering calls (Handset)
Making calls Dial the phone number. i{C}/{s}
Answering calls {C}/{s}
To hang up {OFF}
To adjust the receiver or
speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial
list
{REDIAL}i{V}/{^}: Select the desired phone
number. i{C}
To adjust the handset ringer
volume
1{MENU}i{#}{1}{6}{0}
2{V}/{^}: Select the desired volume. i{Save}
Shared phonebook (Handset)
Adding entries 1{Phonebook}i{Add}
2Enter the party’s name (16 characters max.). i
{Next}
3Enter the party’s phone number (32 digits max.).
i{Next}i{Save}i{OFF}
LTo enter a name, see the character table in the
operating instructions.
Making calls {Phonebook}i{Search}i{V}/{^}: Select
the desired entry. i{C}
Answering system (Base unit)
Answering on/off Press {ANSWER ON}to turn on/off the answering
system.
Listening to messages {6}
For further information, visit http://www.panasonic.com/help or refer to operating
instructions.
TG9361_QG(e).fm Page 3 Wednesday, December 26, 2007 7:26 PM

– 4 –
Frequently asked questions
Question Cause/solution
How can I increase the
handset volume level?
LPress navigator key {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
LTry to relocate the base unit so that distance from
location to use the handset will be minimized.
LIf the same problem occurs even if the handset is next
to the base unit, send your unit for service.
Can I add another
accessory handset to my
base unit?
LYes, you can add up to 6 handsets (including the
handset(s) sold with your own base unit) to a single
base unit.
LTo purchase accessory handset (KX-TGA630/
KX-TGA930/KX-TGA935), please visit
http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
Can I keep batteries
charging all the time?
LYou can leave the handset on the base unit or charger
anytime. This will not harm the batteries.
How can I answer a call
waiting call (2nd call)?
LPress {CALL WAIT}when you hear call waiting tone.
For further information, visit http://www.panasonic.com/help or refer to operating
instructions.
TG9361_QG(e).fm Page 4 Wednesday, December 26, 2007 7:26 PM

– 5 –
Quick troubleshooting
Place the handset on the base unit, then
check if “Charging”is displayed.
“Charging”is not displayed. “Charging”is
displayed.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
Unplug the AC adaptor of the base unit and remove the
batteries from the handset, then plug in the AC adaptor and
insert the batteries into the handset again. Try to re-register
the handset (page 7).
Lift the handset, then try again.
If handset still shows the same
message, try to re-register the
handset (page 7).
“Charging”is still not
displayed.
Re-registration failed.
Re-registration failed.
“Charging”is
displayed, now.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to base. Reconnect AC adaptor.”
1Handset shows:
TG9361_QG(e).fm Page 5 Wednesday, December 26, 2007 7:26 PM

– 6 –
Quick troubleshooting
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
Check if the telephone
cord is properly
connected to both the
base unit and
telephone line jack
on the wall.
Try to connect your
telephone into a
different line.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone Dial tone is
heard.
2No dial tone is heard from handset.
Try remedy for
1on previous
page.
See if “Check tel line”is shown on the handset display.
Your telephone
may need service
when only back
speaker provides
a dial tone.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to
base. Reconnect
AC adaptor.”
is displayed.
“Talk”is
displayed.
Displayed Not displayed
Still displayed
Still displayed
5
No link to base.
Reconnect AC
adaptor.
5
Talk
K Mute Ph.book L
{C}
{s}
TG9361_QG(e).fm Page 6 Wednesday, December 26, 2007 7:26 PM

– 7 –
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, register the handset.
{MENU}i{#}{1}{3}{0}
Press and hold {LOCATOR}for 4
seconds until the registration tone
sounds.
LThe next step should be completed
within 90 seconds.
LWhile registering, “Base
registering”is displayed on all
registered handsets.
Press {OK}, then press {OFF}after a
long beep sounds.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
{MENU}
5
Press LOCATOR
on base for 4sec
Then press OK L
Base unit
{LOCATOR}
Handset
5
Press LOCATOR
on base for 4sec
Then press OK
L
{OK}
TG9361_QG(e).fm Page 7 Wednesday, December 26, 2007 7:26 PM

1Read this Quick Guide or Operating
Instructions
LIf you lost the Operating Instructions, you can
download a copy at
http://www.panasonic.com/help
2Visit our website:
http://www.panasonic.com/help
LFAQs and troubleshooting hints are available.
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at:
1-800-211-PANA (1-800-211-7262)
LMonday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TG9361_QG(e).fm Page 8 Wednesday, December 26, 2007 7:26 PM