Panasonic KX-TGB110UE User manual

Operating Instructions
Digital Cordless Phone
Model No. KX-TGB110UE
KX-TGB112UE
Model shown is KX-TGB110.
Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them
for future reference.
KX-TGB112UE.indd 1 12/01/2017 11:54

Table of Contents
2
Introduction
Accessory information ..................... 3
Important Information
For your safety................................. 4
Important safety instructions............ 5
For best performance ...................... 6
Other information............................. 7
Specications .................................. 7
Gettting Started
Setting up ........................................ 9
Note when setting up..................... 10
Navigating the menus.....................11
Date and time .................................11
Other settings .................................11
Controls ......................................... 12
Display icons ................................. 13
Menu Map...................................... 14
Making/Answering Calls
Making calls................................... 15
Answering calls.............................. 15
Useful features during a call.......... 15
Intercom, transferring calls and
conference calls ............................ 16
Redial ............................................ 16
Lock/unlock the keypad................. 17
Handset locator ............................. 17
Phonebook
Phonebook .................................... 18
Caller ID and Calls list
Caller ID and Calls list ................... 20
Programming
Clock and Alarm ............................ 22
Personal settings........................... 22
Base settings................................. 23
Useful Information
Voicemail ....................................... 27
Troubleshooting............................. 27
Index
Index.............................................. 29
KX-TGB112UE.indd 2 12/01/2017 11:54

3
Introduction
Accessory information
Supplied accessories
No. Accessory item/Part number
Quantity
KX-TGB110 KX-TGB112
AC adaptor/S003AIB0600040 1 2
Telephone line cord 1 1
Rechargeable batteries*1 2 4
Handset cover*2 1 2
Charger - 1
*1 See below for replacement battery information.
*2 The handset cover comes attached to the handset.
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item Model number
Rechargeable
batteries*1
Battery type:
– Minimum amperage of 300 mAh
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
– 1.2 V
*1 Replacement batteries may have a different capacity from that of the
supplied batteries. We recommend using Panasonic rechargeable batteries.
Other information
● Design and specications are subject to change without notice.
●The illustrations in these instructions may vary slightly from the actual
product.
1
2
3
4
5
12345
KX-TGB112UE.indd 3 12/01/2017 11:54

4
Important Information
●Never touch the plug with wet
hands. Danger of electric shock
exists.
Installation
● To prevent the risk of re or
electrical shock, do not expose
the product to rain or any type of
moisture.
●Do not place or use this product
near automatically controlled
devices such as automatic doors
and re alarms. Radio waves
emitted from this product may
cause such devices to malfunction
resulting in an accident.
●Do not allow the AC adaptor
or telephone line cord to be
excessively pulled, bent or placed
under heavy objects.
Operating safeguards
●Unplug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
●Do not disassemble the product.
●Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to
become wet at all. This may cause
a re. If the telephone line cord
plug becomes wet, immediately
pull it from the telephone wall jack,
and do not use.
Medical
●Consult the manufacturer of any
personal medical devices, such
as pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
For your safety
To prevent severe injury and loss
of life/property, read this section
carefully before using the product to
ensure proper and safe operation of
your product.
WARNING
Power connection
●Use only the power source marked
on the product.
●Do not overload power outlets and
extension cords. This can result in
the risk of re or electric shock.
●Completely insert the AC adaptor/
power plug into the power outlet.
Failure to do so may cause electric
shock and/or excessive heat
resulting in a re.
●Regularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power outlet,
then wiping with a dry cloth.
Accumulated dust may cause an
insulation defect from moisture,
etc. resulting in a re.
●Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions
can cause re or electric shock.
Conrm that smoke has stopped
emitting and contact an authorized
service centre.
●Unplug from power outlets and
never touch the inside of the
product if its casing has been
broken open.
KX-TGB112UE.indd 4 12/01/2017 11:54

5
Important Information
Battery
●We recommend using the
batteries noted on page 3.
USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
●Do not mix old and new batteries.
●Do not open or mutilate the
batteries. Released electrolyte
from the batteries is corrosive
and may cause burns or injury to
the eyes or skin. The electrolyte
is toxic and may be harmful if
swallowed.
●Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets,
or keys to touch the batteries,
otherwise a short circuit may
cause the batteries and/or the
conductive material to overheat
and cause burns.
●Charge the batteries provided
with or identied for use with this
product only, in accordance with
the instructions and limitations
specied in this manual.
●Only use a compatible base
unit (or charger) to charge the
batteries. Do not tamper with the
base unit (or charger). Failure
to follow these instructions may
cause the batteries to swell or
explode.
Important safety
instructions
When using your product, basic
safety precautions should always
frequency) energy. (The product
operates in the frequency range
of 1.88 GHz to 1.90 GHz, and the
RF transmission power is 250 mW
(max.).)
●Do not use the product in health
care facilities if any regulations
posted in the area instruct you not
to do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Installation and location
●Never install telephone wiring
during an electrical storm.
● Never install telephone line jacks
in wet locations unless the jack
is specically designed for wet
locations.
●Never touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the network
interface.
●Use caution when installing or
modifying telephone lines.
●The AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.
●This product is unable to make
calls when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
KX-TGB112UE.indd 5 12/01/2017 11:54

6
Important Information
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio
frequency transmitters, such as
external antennas of mobile phone
cell stations. (Avoid putting the
base unit on a bay window or near
a window.)
●Coverage and voice quality
depends on the local
environmental conditions.
●If the reception for a base unit
location is not satisfactory, move
the base unit to another location
for better reception.
Environment
●Keep the product away from
electrical noise generating
devices, such as uorescent
lamps and motors.
●The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
●The product should not be
exposed to direct sunlight.
● Do not place heavy objects on top
of the product.
●When you leave the product
unused for a long period of time,
unplug the product from the power
outlet.
●The product should be kept
away from heat sources such
as radiators, cookers, etc. It
should not be placed in rooms
where the temperature is less
be followed to reduce the risk of re,
electric shock, and injury to persons,
including the following:
1. Do not use this product near
water for example, near a
bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement
or near a swimming pool.
2. Avoid using a telephone (other
than a cordless type) during an
electrical storm. There may be a
remote risk of electric shock from
lightning.
3. Do not use the telephone to
report a gas leak in the vicinity of
the leak.
4. Use only the power cord and
batteries indicated in this manual.
Do not dispose of batteries in a
re. They may explode. Check
with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding
noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
●For maximum coverage and
noise-free communications, place
your base unit:
– at a convenient, high,
and central location with no
obstructions between the handset
and base unit in an indoor
environment.
KX-TGB112UE.indd 6 12/01/2017 11:54

7
Important Information
Information on Disposal in
other Countries outside the
European Union
These symbols are only valid in
the European Union. If you wish to
discard these items, please contact
your local authorities or dealer and
ask for the correct method of disposal.
Note for the battery removal
procedure
Refer to “Battery installation” on page
9.
Specications
●Standard:
DECT (Digital Enhanced Cordless
Telecommunications)
●Frequency range:
1.88 GHz to 1.90 GHz
●RF transmission power:
Approx. 10 mW (average power
per channel)
●Power source:
100-240 V AC, 50/60 Hz
●Power consumption:
Base unit:
Standby: Approx. 0.75 W
Maximum: Approx. 1.15 W
Charger:
Standby: Approx. 0.25 W
Maximum: Approx. 0.85 W
●Operating conditions:
0 oC to 40 oC 20 % – 80 % relative
air humidity (dry)
than 0 °C or greater than 40 °C.
Damp basements should also be
avoided.
●The maximum calling distance
may be shortened when the
product is used in the following
places: Near obstacles such as
hills, tunnels, underground, near
metal objects such as wire fences,
etc.
●Operating the product near
electrical appliances may cause
interference. Move away from the
electrical appliances.
Routine care
●Wipe the outer surface of the
product with a soft moist cloth.
●Do not use benzine, thinner, or
any abrasive powder.
Other information
●CAUTION: Risk of explosion if
battery is replaced by an incorrect
type. Dispose of used batteries
according to the instructions.
Notice for product disposal,
transfer, or return
●This product can store your
private/condential information. To
protect your privacy/condentiality,
we recommend that you erase
information such as phonebook or
caller list entries from the memory
before you dispose of, transfer, or
return the product.
KX-TGB112UE.indd 7 12/01/2017 11:54

8
Important Information
Note:
●The range of the handset under
maximum conditions is 50 metres
indoors and 300 metres outdoors.
Please note it will probably be
shortened when near concrete
barriers, etc.
KX-TGB112UE.indd 8 12/01/2017 11:54

9
Getting Started
Note:
●Use only the supplied Panasonic
AC adaptor S003AIB0600040.
Battery installation
●USE ONLY rechargeable Ni-MH
batteries AAA (R03) size( A).
●Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
● Conrm correct polarities.
Setting up
Connections
■Base unit
Connect the AC adaptor plug to
the unit until you hear a click.
Connect the AC adaptor to the
power outlet.
Connect the telephone line
cord to the unit, then to the
telephone line jack until you
hear a click.
A DSL/ADSL lter (not supplied)
is required if you have a DSL/
ADSL service.
Note:
●Use only the supplied Panasonic
AC adaptor S003AIB0600040.
●Use only the supplied telephone
line cord.
■Charger
Connect the AC adaptor plug to
the unit until you hear a click.
Connect the AC adaptor to the
power outlet.
Press
down
1
Slide
2
A
LINE
KX-TGB112UE.indd 9 12/01/2017 11:54

10
Getting Started
should be made for access to
emergency services. We recommend
connecting a corded-type telephone
(without AC adaptor) to the same
telephone line or to the same
telephone line jack using a T-adaptor.
Note for battery installation
●Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on
page 3 and 5.
Note for battery charging
●It is normal for the handset to feel
warm during charging.
●Clean the charge contacts of the
handset, base unit and charger
with a soft and dry cloth once a
month. Before cleaning the unit,
disconnect from power outlets and
any telephone line cords. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Battery is fully charged
Battery is partially charged
Battery is running low
Flashes when battery is
almost fully discharged
Battery charging
Charge for at least 7 hours.
When the handset needs charging,
the display shows “LOW BATTERY”
and there is a warning beep every 2
minutes during a call, recharge the
handset before using it again. When
charging, icon will scroll on the
display.
Note when setting up
Note for connections
●The AC adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use.)
●The AC adaptor should be
connected to a vertically oriented
or oor-mounted AC outlet. Do
not connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it
to become disconnected.
During a power failure
The unit will not work during a power
failure. Alternative arrangements
KX-TGB112UE.indd 10 12/01/2017 11:54

11
Getting Started
Date and time
1 LmR, LdR“CLOCK/
ALARM”, press LmR.
2 “DATE & TIME”.
3 LmRto select.
4 Enter the date using the keypad
(e.g. 12--08--15 for 12th of August
2015), press LmR to conrm.
5 Enter the time using the keypad
(e.g. 14--30 for 2:30pm), press
LmR to conrm.
Other settings
Dial mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “TONE”,
to change this setting, see page 24.
“TONE”: For tone dial service.
“PULSE”: For rotary/pulse dial
service.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous use 10 hours max.*1
Not in use (standby) 200 hours max.*1
*1 If eco mode is off.
Note:
●Actual battery performance
depends on usage and ambient
environment.
Navigating the menus
The phone has an easy to use menu
system. Each menu has a list of
options, which can be seen on the
menu map on page 14.
When the handset is switched on and
in standby:
1 LmRto open the main menu.
2 LsR: available options.
3 LmRto select an option.
4 To return to the previous menu
level, press LpR.
5 To exit the menu and return to
standby, press LeR.
Note:
If no buttons are pressed for 30
seconds, the handset returns to
standby automatically.
KX-TGB112UE.indd 11 12/01/2017 11:54

12
Getting Started
1 Speaker
2 Up
During a call, press to increase
earpiece volume, page 15.
When the phone is ringing, press
to increase the handset ringer
volume, page 15.
Press to scroll through the menu
options, redial list, calls list and
phonebook entries.
3 Menu/OK/Mute
Press to open the Menu.
Press to select menu options
and to conrm a displayed op-
tion.
During a call, press to turn mute
on/off, page 15.
4 Talk
Press to make and receive calls.
5 Dial keypad
6/Pulse to Tone dialling/
Keylock
Dial a star.
During a call, press to switch
from pulse dialling to tone
dialling.
Press and hold to lock/unlock
the keypad.
7 Recall/Flash
Use with switchboard/PBX
services and some network
services.
8 Microphone
9 Receiver
10 Display
See page 13 for an overview
of the display icons.
Controls
Handset
1
2
3
4
5
6
11
12
17
9
10
7
8
14
13
16
15
KX-TGB112UE.indd 12 12/01/2017 11:54

13
Getting Started
Base unit
1Locator button
Use to locate a misplaced
handset or when registering
additional handsets.
2Charge contacts
Display icons
11 Phonebook/Delete/Back
In standby mode, press to open
the phonebook list.
In editing mode, press to delete
characters and digits.
Go back to the previous menu
level.
12 End Call/Exit/Handset on/off
Press to end a call.
When viewing the redial / calls
list / phonebook or when in the
menu, press to exit and return
to standby.
Press and hold for about 2
seconds to switch the handset on.
Press and hold for about 5
seconds to switch the handset off.
13 Down/Calls list
During a call, press to decrease
earpiece volume, page 15.
When the phone is ringing, press
to decrease the handset ringer
volume, page 15.
Press to scroll through the menu
options, redial list, calls list and
phonebook entries.
In standby mode, press to open
the calls list.
14 #/Pause
Dial a #.
Press and hold to enter a pause
(P) when pre-dialling or storing
numbers.
15 Intercom
Used to make internal calls and
transfer calls to other handsets
registered to the base, page 16.
This feature is not available for
single handset model.
16 Redial
Press to open the redial list,
page 16.
17 Charge contacts
1
2
Handset name or Time
In standby mode, press and hold
LmRto switch handset idle screen
between handset name or time.
KX-TGB112UE.indd 13 12/01/2017 11:54

14
Getting Started
Menu Map
PHONEBOOK - VIEW
- ADD NEW
- EDIT
- DELETE*
- DELETE ALL*
CLOCK/ALARM - DATE & TIME
- SET ALARM
PERSONAL SET - HANDSET TONE
-RING VOLUME
-RING MELODY
-KEY TONE
- HANDSET NAME
- AUTO ANSWER
- LANGUAGE
ADVANCED SET - ECO MODE
- ZERO EMIT
- AUTO PREFIX
- RECALL TIME
- DIAL MODE
- CHANGE PIN
- REGISTER
- UNREGISTER
- RESET
*Only available if a phonebook entry
is stored.
Note:
For some countries “DIAL MODE”
menu will not show in the menu and
is preset to tone dialling.
Signal icon
Steady when registered
and in range. Flashes when
out of range of the base or
searching for the base.*
Eco mode is ON
Zero Emit is ON
Handset ringer is off
Indicates a missed call
Steady when making an
outgoing call
Flashes to indicate an
incoming or internal call
Indicates an answered call
when viewing the calls list
Indicates an outgoing call
when viewing the redial list
Menu is open
Keypad is locked
Alarm is set
Indicates new voicemail
messages received
Phonebook is opened
More text after
# was pressed while dialling
*If you are on a call when you move
out of range you will hear a warning
beep and the line will hang up.
Move closer to the base and the
handset will automatically reconnect.
KX-TGB112UE.indd 14 12/01/2017 11:54

15
Making calls
1 LtR.
2 When there is a dial tone, dial the
phone number.
3 When you nish talking, press
LeRor place the handset on the
base unit or charger.
OR
1 Lift the handset and dial the
phone number.
●To correct a digit, press LpR.
2 LtR.
3 When you nish talking, press
LeRor place the handset on the
base unit or charger.
Note:
●When “BUSY” is displayed,
another handset is in use. Wait
and try again later.
Adjusting the receiver volume
LsRrepeatedly while talking.
Pause (for PBX/long distance
service users)
A pause is sometimes required
when making calls using a PBX or
long distance service. When storing
a calling card access number and/
or PIN in the phonebook, a pause is
also needed.
Example: If you need to dial the line
access number “0” when making
outside calls with a PBX:
1 Press and hold LhR“P” (Pause)
will be displayed.
2 Dial the phone number. LtR.
Note:
●A 3 second pause is inserted each
time you press and hold LhR
(Pause) on the handset.
Answering calls
When an external call is received, the
phone rings and icon ashes on
the display.
1 Lift the handset, press LtRwhen
the unit rings.
2 When you nish talking, press
LeRor place the handset on the
base unit or charger.
Auto answer: You can answer calls
simply by lifting the handset (page
23).
Adjusting the handset ringer
volume
LsRrepeatedly to select the desired
volume while ringing.
Useful features during
a call
Mute
1 LmRduring a call.“ MUTE ON”
2 To return to the call, press LmR.
Recall
LfRallows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
●To change the recall time, see
page 24.
Making/Answering Calls
KX-TGB112UE.indd 15 12/01/2017 11:54

16
Making/Answering Calls
1 LtRto answer the call.
Transferring calls
Outside calls can be transferred or a
conference call with an outside party
can be made between 2 handsets.
During an outside call:
1 Press LIRand the other handset
rings automatically.
2 When the other handset answers,
press LeRto complete the
transfer.
Note:
If there is no answer from the other
handset press LIRto return to
the external caller. The external
call resumes automatically after 60
seconds if there is no answer.
3-way conference call
To hold a 3-way conference call
between 2 internal callers and 1
external caller.
During a call with an outside caller:
1 Press LIRand the other handset
rings automatically.
2 Once the second handset
answers, press and hold LmRto
join all 3 callers.
3 Press LeRto end the call.
Redial
Making a call using the redial
list
The last 10 phone numbers dialled
are stored in the redial list (each 24
digits max.).
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting
Caller ID, you must rst subscribe
with your service provider/telephone
company.
This feature allows you to receive
calls while you are already talking on
the phone. If you receive a call while
on the phone, you will hear a call
waiting tone.
If you subscribe to both Caller ID
and Call Waiting with Caller ID
services, the 2nd caller’s information
is displayed on the handset that is
in use after you hear the call waiting
tone.
LfRto answer the 2nd call.
Intercom, transferring
calls and conference
calls
Available for: KX-TGB112
Making an internal call
If 2 or more handsets are registered
to the base, internal calls can be
made between two handsets. icon
ashes and the display shows the
handset number you are calling.
1 Press LIRand the other handset
rings automatically.
Receiving an internal call
When an internal call is received,
icon ashes and the handset number
that is calling is displayed.
KX-TGB112UE.indd 16 12/01/2017 11:54

17
Making/Answering Calls
Lock/unlock the keypad
The keypad can be locked so that
it cannot be operated accidentally
while carrying it around.
Note:
When the keypad is locked an
incoming call can still be answered
and the handset will operate as
normal. When the call ends, the
keypad lock comes on again.
1 Press and hold L*R, “KEYS
LOCKED” and icon is
displayed.
2 Press and hold L*Ragain to
unlock the keypad.
Handset locator
The handset locator can be used to
alert a handset user that they are
wanted or locate a missing handset.
Locator calls cannot be answered by
a handset.
1 LpRon the rear of the base. All
handsets registered to the base
will ring.
2 To stop the ringing, LpRor press
any button except LfR, LrR, and
LIRon the handset.
1 LrR.
2 LsR: Select the desired phone
number.
3 LtR.
Note:
If you have Caller ID and the caller’s
number exactly matches an entry
stored in the phonebook, the name is
displayed.
Erasing a number or the entire
redial list
1 LrR.
2 LsR: Select the desired phone
number.
3 LmR, LdR“ DELETE” or
“ DELETE ALL”.
4 LmR.
5 LmR to conrm or LpRto cancel.
Copy a Redial list number to the
phonebook
1 LrR.
2 LsR: Select the desired phone
number.
3 LmR. “SAVE NUMBER".
4 LmR. “ENTER NAME”.
5 Enter the name, press LmR. The
number is displayed.
6 Edit the number if necessary,
then press LmR. The number is
stored.
Note:
See ‘Entering names and writing tips’
on page 18.
KX-TGB112UE.indd 17 12/01/2017 11:54

18
Phonebook
View or dial an entry
1 LpR. icon is displayed.
2 LsR: Select the required entry.
OR
Enter the rst letter of the name
to search alphabetically. The rst
name that starts with this letter or
the nearest letter in the alphabet
will be displayed.
LsR: Select the required entry.
3 LtRto dial or LeRto return to
standby.
Note:
When the name is displayed, to
switch the number, press LmR. To
return to the name, press LpR.
Edit a name and number
1 LmR. “PHONEBOOK”.
2 LmR, LdR“EDIT”, press
LmR.
3 LsR: To select the entry that
needs to be edited, or search
alphabetically, press LmR.
4 LpRto delete the name if
required, then enter the new
name, press LmR. The existing
number is displayed.
5 LpRto delete the number if
required, then enter the new
number, press LmR. The entry
is saved.
6 LeRto return to standby.
Delete an entry
1 LmR. “PHONEBOOK”.
2 LmR, LdR“DELETE”, press
LmR.
Phonebook
The phonebook can store up to 50
names and numbers. Names can
be up to 12 characters long and
numbers up to 24 digits.
Store a name and number
When subscribed to Caller ID,
to display the name of the caller
instead of the number, save the full
telephone number including the area
code to the phonebook.
Multiple entries can be stored with
the same name. However, to prevent
unnecessary duplicated entries, the
number can be stored only once.
1 LmR. “PHONEBOOK”.
2 LmR, LdR“ADD NEW”.
3 LmR. “ENTER NAME”.
4 Enter the name, press LmR.
“ENTER NUMBER” is displayed.
5 Enter the number, press LmR.
The entry is saved.
6 LeRto return to standby.
Entering names and writing tips
Use the keypad letters to enter
names, e.g. to store TOM:
L R once to enter T.
L R three times to enter O.
L R once to enter M.
LpRto delete the last character or
digit.
LsR: Move between characters/digits.
L R to insert a space.
L R twice to insert a dash.
KX-TGB112UE.indd 18 12/01/2017 11:54

19
Phonebook
3 LsR: To select the entry that
needs to be deleted, or search
alphabetically, press LmR.
4 LmR to conrm or LpRto cancel.
Delete all entries
1 LmR. “PHONEBOOK”.
2 LmR, LdR“DELETE ALL”,
press LmR.
3 LmR to conrm or LpRto cancel.
Store a quickdial number
Your phone can store 2 quickdial
numbers for key 1 and 2.
The quickdial name can be up to 10
characters.
1 LmR. “PHONEBOOK”.
2 LmR, LdR“EDIT”, press
LmR.
3 LsR: To select the key you want to
store the number, press LmR.
4 Enter the name, press LmR.
5 Enter the number, press LmR.
NOTE
An entry stored in the phonebook can
not be stored as a quickdial number.
To dial a quickdial number, press
and hold the relevant key until the
number is displayed and dialled.
KX-TGB112UE.indd 19 12/01/2017 11:54

20
Caller ID and Calls list
View the Calls list
1 LdRto open the Calls list. If there
are no calls in the list, the display
shows “LIST EMPTY”.
2 LsR: To the required entry.
3 LmR, “VIEW”, press LmR.
4 The display shows the date and
time of the call.
Note:
disappears after viewing all
missed call.
Dial a number in the Calls list
1 LdRto open the Calls list.
2 LsR: To the required entry.
3 LtRto dial the displayed entry.
Copy a Calls list number to the
phonebook
1 LdRto open the Calls list.
2 LsR: To the required entry.
3 LmR, LdR“SAVE
NUMBER”.
If the name is already entered, go
to step 5.
4 LmR. “ENTER NAME”.
5 Enter the name, press LmR. The
number is displayed.
6 Edit the number if necessary,
then press LmR to conrm.
Note:
See ‘Entering names and writing tips’
on page 18.
Caller ID and Calls list
IMPORTANT
To use Caller ID, rst subscribe to the
service from the network provider. A
subscription fee may be payable.
To ensure that the caller’s name
is displayed, make sure the full
telephone number, including the area
code is stored in the phonebook.
If the caller’s number is stored in the
phonebook, the name assigned to it
will be displayed.
If the number is unavailable,
“UNKNOWN” will be displayed.
Caller Display
If subscribed to Caller ID, the caller’s
number will be displayed (provided
it is not withheld) prior to answering
the call. The display can show the 12
digits or characters of the names and
phone numbers.
To switch the screen between name
or phone number, press LmR.
If the caller’s name and number
are stored in the phonebook and a
number match is found, the caller’s
name will be displayed instead.
Calls list
The Calls list stores details of the
last 20 received calls, including the
phone number and date and time of
the call.
The caller’s details are stored in the
Calls list whether or not the call has
been answered. When the list is full,
and a new call is received, the oldest
entry will be deleted automatically.
KX-TGB112UE.indd 20 12/01/2017 11:54