Panasonic VE-GD68DL User manual

Quick Reference Guide
Cordless Phone
Thank you for purchasing a Panasonic product.
●This guide explains some basic features and operations, but not all of them. For further details,
see the Japanese operating instructions.
●This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
●Any details given in this guide are subject to change without notice.
Table of Contents
Parts Descriptions .....................................................................................................................2
Basic Operations .......................................................................................................................3
●VE-GD68DL includes 1 cordless handset and 1 base unit.
●VE-GD68DW includes 2 cordless handsets and 1 base unit.
Base unit
(VE-GD68)
Cordless handset
(KX-FKD556)
Model No. VE-GD68DL
VE-GD68DW

2
1Handset
2Block button
3Nuisance Call Prevention/Nuisance
Call Helpline button
4Liquid crystal display
5Antenna & Call/Talk indicator
6Caller ID button & indicator
( )
Redial button ( )
Volume control button ( )
7Auto Answer button & indicator
8Playback button
9Function/Set button
10
Call Record button
11
Clear/Flash button
12
Stop/Hold/Intercom button
13
Monitor button
14
Numeral/Character buttons
15
Tone button (to switch to tone dialing)
16
One-touch Dial buttons
17
Phonebook/Edit/Character entry mode
button
18
Secure button
19
Speaker (Base unit)
Base unit
Parts Descriptions
34
6
7
8
11
12
10
13
1516
19
14
17
18
9
21 5
22
23
24
25
26
27
28
29
30
31
32
33
34
36
35
Backside View
21
20
Cordless handset
20
Incoming Call Indicator
21
Earpiece
22
Liquid crystal display
23
Multi-operation/One-touch Dial buttons
24
Hold/Intercom button
25
Caller ID button ( )
Redial button ( )
Volume control button ( )
26
Off button
27
Numeral/Character buttons
28
Speakerphone button
29
Microphone
30
Flash button
留守 : Auto Answer button
31
Tone button (to switch to tone dialing)
32
Function/Set button
33
Talk button
34
Phonebook button
35
Speaker
36
Battery cover

3
■To hear recorded messages while away from
home (Remote control)
Preparation before you leave home
Store a remote control number.
With the handset placed on the base unit, press
（機能 /
決定）
（機能 /
決定）
.
Enter the desired 4-digit number. Press
（機能 /
決定）
, then press .
When you leave home, press to turn on the
indicator.
To hear messages
Dial your home phone number. While the
outgoing message is played back, enter your
remote control number. Announcement.
Press 4. You will hear recorded messages if
any.
NOTE
●This operation can be made only from a
touch-tone phone.
Cordless handset
■To make a call
Lift the cordless handset from the charger and
press (
33
). Dial the phone number (
27
).
Talk. To end the call, place the cordless
handset on the charger or press (
26
).
■To receive a call
When the phone rings, lift the cordless handset
from the charger and press . Talk. To
end the call, place the cordless handset on the
charger or press .
■To make a call using the speakerphone
(Hands-free talk)
Press (
28
). Dial the phone number.
Talk to the microphone (
29
). To end the call,
place the cordless handset on the charger or
press .
●Speak clearly about 50 cm away from the
microphone.
●Speak alternately with the other party. The
sound may cut in and out if you both speak at
the same time.
■To receive a call with the speakerphone
(Hands-free talk)
When the phone rings, press . Talk to
the microphone. To end the call, place the
cordless handset on the charger or press .
●The number after the button shows the location
of the button described in the previous page.
Base unit
■To make a call
Lift the handset. Dial the phone number (
14
).
Talk.
■To receive a call
When the phone rings, lift the handset. Talk.
■To place the current call on hold
Press (
12
) during a call. (You can place the
handset on the base unit.)
■To retrieve the held call
●If you have returned the handset on the base
unit, lift the handset.
●If you have not returned the handset on the
base unit, press .
■To transfer the held call to the cordless
handset
Press during a call. ( When you
use multiple cordless handsets, press -
(Intercom No.).) Place the handset on the
base unit when the other party answers.
■To use TAM (Telephone Answering Machine)
When you leave home, press ( 7) to turn
on the indicator. (To deactivate, press
again to turn off the indicator.)
When receiving a call while TAM is activated,
it answers the call automatically in Japanese,
and records the incoming messages. Then, the
indicator starts flashing.
When you return home, press to play
back the messages. The indicator turns off
and the answering mode is deactivated.
After playing back the messages, press (
15
)
twice to erase the messages or press to
keep the messages.
To play back all messages while TAM is
deactivated, press ( 8)
(
6
) to
select “
すべて再生
”
（機能 /
決定）
( 9).
After playing back the messages, press
twice to erase the messages or press to
keep the messages.
*Up to 99 messages can be recorded for approx.
120 minutes in total.
Basic Operations

PNQP1728ZA F0921TU0
Panasonic Corporation 2021
C
■To place the current call on hold
Press (
24
) during a call.
■To retrieve the held call
Press .
■To transfer the held call to the base unit
Press during a call. ( When you
use multiple cordless handsets, press .)
Press when the other party answers.
■To transfer the held call to another cordless
handset
Press during a call. Press
- (Intercom No.). Press when
the other party answers.