Panasonic AK-UB300G User manual

Operating Instructions
Multi-Purpose Camera
ENGLISH
DVQP1279ZA
W1116HM0 -YI
Model No. AK-UB300G
Before operating this product, please read the instructions carefully and save this manual for future use.
Before using this product, be sure to read “Read this first!” (pages 3 to 6).

– 2 –
fMicrosoft®, Windows®, Windows®7, Windows®8, Windows®8.1, Windows®10, Internet Explorer®, ActiveX®, and DirectX®are registered trademarks or
trademarks of Microsoft Corporation in the United States, Japan, and/or other countries.
fApple, Mac, and OS X are trademarks of Apple Inc., registered in the United States and other countries.
fIntel®, Intel®, and CoreTM are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and/or other countries.
fAll other names, company names, product names, etc., contained in this instruction manual are trademarks or registered trademarks of their
respective owners.
fTransferring, copying, disassembling, decompiling, reverse engineering, and exporting in violation of export laws of any software included with this
product are strictly prohibited.
How to read this document
rIllustrations
fIllustrations of the camera, menu screens, and other items, may vary from the actual products.
fScreenshots are used according to guidelines provided by Microsoft Corporation.
rConventions used in this manual
fWords and phrases in [ ] brackets indicate content displayed in the viewnder or monitor.
fWords and phrases in < > brackets indicate design text used on this camera, such as button names.
rReference pages
fReference pages in this document are indicated by (page 00).
rTerminology
fMicrosoft®Windows®7 Professional SP1 32/64-bit is referred to as Windows 7.
fMicrosoft®Windows®8 Professional 32/64-bit is referred to as Windows 8.
fMicrosoft®Windows®8.1 Professional 32/64-bit is referred to as Windows 8.1.
fMicrosoft®Windows®10 Professional 32/64-bit is referred to as Windows 10.
fWindows®Internet Explorer®8.0, Windows®Internet Explorer®9.0, Windows®Internet Explorer®10.0, and Windows®Internet Explorer®11.0 are
referred to as Internet Explorer.
fThe format displayed in the 2160/** is referred to as the UHD mode.
fThe format displayed in the ***/** CROP is referred to as the UHD CROP mode.
fThe format displayed in the 1080/**, 720/** is referred to as the HD mode.

Read this rst!
– 3 –
Read this rst!
indicates safety information.
WARNING:
• To reduce the risk of fire or electric shock, do not
expose this equipment to rain or moisture.
• To reduce the risk of fire or electric shock, keep
this equipment away from all liquids. Use and
store only in locations which are not exposed
to the risk of dripping or splashing liquids, and
do not place any liquid containers on top of the
equipment.
WARNING:
Always keep the drop-prevention wire (optional
accessory) or accessories (flange nut, mounting
screw for wire) out of the reach of babies and
small children.
WARNING:
This equipment is compliant with Class A of
CISPR 32.
In a residential environment this equipment may
cause radio interference.
CAUTION:
To reduce the risk of fire or electric shock and
annoying interference, use the recommended
accessories only.
CAUTION:
Do not remove panel covers by unscrewing.
To reduce the risk of electric shock, do not remove
the covers. No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION:
In order to maintain adequate ventilation, do
not install or place this unit in a bookcase, built-
in cabinet or any other confined space. To
prevent risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
Check the installation at least once a year.
An improper installation could cause the unit to fall
off resulting in personal injury.
CAUTION:
Do not pick up and move the unit while the tripod
is attached.
The fitting may break under the weight of the
tripod, which may result in injury.
CAUTION:
Do not leave the unit in direct contact with the skin
for long periods of time when in use.
Low temperature burn injuries may be suffered if
the high temperature parts of this unit are in direct
contact with the skin for long periods of time.
When using the equipment for long periods of
time, make use of the tripod.
CAUTION:
Naked flame sources, such as lighted candles,
should not be placed on the apparatus.

Read this rst!
– 4 –
indicates safety information.
FCC NOTICE (USA)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION:
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions and the
user must use only shielded interface cables when connecting to host computer or peripheral devices.
Also, any unauthorized changes or modifications to this equipment could void the user’s authority to
operate this device.
NOTIFICATION (Canada)
CAN ICES-3(A)/NMB-3(A)

Read this rst!
– 5 –
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.

Read this rst!
– 6 –
The rating plate is on the underside of the unit.
For Turkey
AEEE Yönetmeliğine Uygundur.
AEEE Complies with Directive of Turkey.
Декларація про Відповідність
Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в
електричному та електронному обладнанні
(затвердженого Постановою №1057 Кабінету Міністрів України)
Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних
Речовин в електричному та електронному обладнанні (ТР ОВНР).
Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР, :
1.свинець(Pb) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон;
2.кадмій (Cd) – не перевищує 0,01 % ваги речовини або в концентрації до 100 частин на мільйон;
3.ртуть(Hg) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон;
4.шестивалентний хром (Cr6+) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин
на мільйон;
5.полібромбіфеноли (PBB) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на
мільйон;
6.полібромдефенілові ефіри (PBDE) – не перевищує 0,1 % ваги речовини або в концентрації до 1000
частин на мільйон.
Manufactured by: Panasonic Corporation, Osaka, Japan
Importer’s name and address of pursuant to EU rules:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

Contents
– 7 –
Contents
Read this rst! 3
Chapter 1 Overview 8
Before using the camera 9
Notes 10
Required environment for computer 10
Disclaimer 10
Notes regarding network 10
Using the camera in a system 11
Basic conguration devices 11
System block diagram 11
Accessories 13
Frame frequency setting 14
Chapter 2 Description of Parts 15
Front side 16
Left side 17
Right side 18
Rear side 19
Upper side 20
Bottom side 21
Chapter 3 Operation 22
On-screen displays of the monitor 23
Data 25
User le 25
Operation procedure 26
Adjustment for shooting 27
Lens ange back adjustment 27
Iris gain volume adjustment 27
White balance adjustment 27
Black balance adjustment 27
Genlock adjustment 28
Shutter mode 28
Shutter mode/speed setting 28
Synchro scan mode setting 28
Image quality adjustment 29
Detail function 29
Skin tone function 29
RB gain control function 30
Chroma setting function 30
Matrix function 30
Color correction function 31
Black control function 31
Gamma function 31
Knee function 32
High color function 32
White clip function 32
Intelligent function 33
Multi-formats 34
Output format list 34
Convenient shooting functions 36
Scan reverse shooting 36
Displaying the zebra pattern 36
Displaying the center marker 36
Displaying the safety zone marker 36
Displaying the frame marker 36
Dynamic range stretcher function 36
Color bar 37
Focus assist function 37
Flash band compensation (FBC) function 37
UHD crop function 38
Haze elimination function 39
Chapter 4 Menu Operations 40
Menu operations 41
Basic operations 41
Menu conguration 43
[MAIN MENU] 43
Menu list 44
[DISPLAY SETUP] 44
[SWITCH MODE] 45
[PAINT] 48
[SYSTEM MODE] 58
[IN/OUT SELECT] 58
[INTELLIGENT] 59
[NETWORK SETUP] 60
[FILE] 60
[MAINTENANCE] 61
[DIAGNOSTIC] 62
Chapter 5 Connecting to External Devices 64
Connecting the remote camera controller (AW-RP50N/
AW-RP50E/AW-RP120G) 65
Serial connection with the <I/F> terminal 65
IP connection with the <LAN> terminal 67
Chapter 6 Web Screen 68
Setting the network 69
Software 69
Conguring the camera using EASY IP Setup Software 69
Installing the plugin software for display 70
Displaying the web screen 71
Notes on the web screen 71
Web screen display on computer 71
Switching [Live]/[Setup] screens 72
[Live] screen (single display mode) 73
Names and functions of parts ([Live] screen) 74
[Live] screen (multi display mode) 77
[Multi-screen] button 77
[Setup] screen 78
Logging in to the [Setup] screen 78
Names and functions of parts ([Setup] screen) 78
[Basic] screen 79
[Image] screen 79
[Multi-screen setup] screen 83
[User mng.] screen 84
[Network] screen 85
[Maintenance] screen 87
Chapter 7 UB300 Setting Tool 90
Introduction 91
Function of the UB300 Setting Tool 91
Setup 92
Installation 92
Connection 93
Operation 94
Startup 94
Top screen 94
Connection setting screen 95
Firmware update function screen 95
Setting menu screen 96
Chapter 8 Maintenance 97
Troubleshooting 98
For operations 98
For IP images 99
Web screen 100
Checking the operating time 101
Warning displays 102
Camera warning displays 102
Other warning displays 102
Updating the camera rmware 103
Chapter 9 Specications 104
Specications 105
General 105
Camera unit 105
Video input/output 106
Other input/output 106
Details of the connector signals 107
Index 109

Before using the camera, read this chapter.
Chapter 1 Overview

– 9 –
Chapter 1 Overview — Before using the camera
Before using the camera
rUse appropriate lighting when shooting to capture images with clear color
fTo make the color of images clear, use appropriate lighting for shooting.
fColors may not be reproduced correctly under uorescent lighting. Select appropriate lighting as necessary.
fUse the ND lter in excessively bright locations.
rTurn off the power before connecting or disconnecting the cables
fTurn off the power of the devices before connecting or disconnecting the cables.
rHandling of the camera
fDo not drop or add strong impact or vibration to the camera. Doing so may lead to failure.
rDo not touch optical system parts
fThe optical system parts are the “life” of the camera. Do not touch the optical systems on occasions such as when the lens is removed. In the event
that dust has adhered, use a blower for cameras or lens cleaning paper to gently remove the dust.
rDo not shoot images toward sunlight or a laser beam
fShooting toward sunlight or a laser beam for a long period of time may result in damage of the MOS.
rWhen using the camera in rain or snow, or on a beach or shore
fPrevent water from splashing on or entering the camera.
rHumidity and dust
fThe internal parts of the camera are more easily damaged in humid and dusty locations. Avoid such locations.
rTemperature range for use
fUsing the camera under the following conditions may have negative effects on the image quality or internal parts of the camera.
Cold places where the temperature is −10 °C (14 °F) or below
Hot places where the temperature is 45 °C (113 °F) or above
fPreheating is required in a low-temperature environment. Conrm display is not lit before using the camera.
rCleaning
fTurn off the power and clean the camera with a dry cloth. If the dust cannot be removed with a dry cloth, try soaking the cloth with kitchen detergent to
gently wipe off the dust.
fUse lens cleaning paper (for use with glasses or cameras) when cleaning the lens.
rCooling fan
fThe camera has an internal cooling fan.
fThe cooling fan is a consumable supply. Replace it after approximately 60,000 hours of use. Be sure to contact your dealer for the replacement.
rPeripheral devices and software
fThe software of the peripheral device that is connected to the camera may require updating.
fFor details, contact your dealer.
rInformation on software used with this product
fThis product includes GNU General Public License (GPL) and GNU Lesser General Public License (LGPL) licensed software, and the customer is
entitled to obtain, modify, or redistribute the source code for the software.
This product includes MIT Licensed software.
This product includes BSD Licensed software.
For details on obtaining the source codes, visit the following website.
http://pro-av.panasonic.net/
However, do not contact Panasonic for questions regarding obtained source codes.

– 10 –
Chapter 1 Overview — Notes
Notes
Required environment for computer
Use a host computer that satises the following requirements.
rCPU
Intel®CoreTM 2 DUO 2.4 GHz or above recommended
rMemory
fWindows
1 GB or above
However, 2 GB or larger for Microsoft®Windows®10/Microsoft®Windows®8.1/Microsoft®Windows®8/Microsoft®Windows®7 64-bit
fMac
2 GB or above
rNetwork function
10BASE-T or 100BASE-TX
1 port
rImage display function
Resolution: 1024×768 pixels or above
Color: True Color 24-bit or above
rSupported OS and web browsers
fWindows
Microsoft®Windows®10 Professional 64-bit/32-bit*1
Microsoft®Windows®8.1 Professional 64-bit/32-bit*1
Windows®Internet Explorer®11.0*1*3
Microsoft®Windows®8 Professional 64-bit/32-bit*1
Windows®Internet Explorer®10.0*1*3
Microsoft®Windows®7 Professional SP1 64-bit/32-bit*2
Windows®Internet Explorer®11.0/10.0/9.0/8.0*3
*1 Use Internet Explorer for desktop. (Internet Explorer for Windows UI is not supported.)
*2 The Windows®XP compatibility mode cannot be used.
*3 Internet Explorer®64-bit cannot be used.
fMac
OS X 10.11 Safari 9.0
OS X 10.10 Safari 8.0.4
OS X 10.9 Safari 7.0.2
OS X 10.8 Safari 6.1.2
Disclaimer
In any case, Panasonic will not liable for any of the following:
fIncidental, special, or consequential damage or harm caused directly or indirectly in regard to the camera
fTrouble or malfunctions caused by the misuse or careless use of a user
fDisassembly, repair, or modication of the camera performed by a user
fInconvenience, damage, or harm arising from the inability to display images as a result of any reason or cause including failure or malfunction of the
camera
fMalfunctions arising from a system that has been combined with a third party device or any inconvenience, damage, or harm caused as a result
thereof
fInconvenience, damage, or harm caused by such as improper installation or any reason other than a defect of the camera
fAny loss of stored information due to any reason
fAny damage or claim regarding loss or leakage of image data or setting data saved in the camera, memory card, or computer
Notes regarding network
This camera is provided with functions which are used upon connecting to a network.
When the camera is used while connected to a network, there are the following potential risks.
fLeakage or disclosure of information via the camera
fManipulation of the camera by a malicious third party
fInterference or interruption of the camera caused by a malicious third party
To prevent such risks, users are responsible for implementing sufcient network security measures inclusive of the following.
fUse the camera over a network where safety is ensured with the installation of a rewall, etc.
fWhen the camera is used in a system to which a computer is connected, be sure to perform regular checks or detections for computer viruses and
malware.
In addition, be sure to observe the following precaution.
fDo not install the camera or cables in a place where they may easily be damaged.

– 11 –
Chapter 1 Overview — Using the camera in a system
Using the camera in a system
An example of a standard system congured with the Multi-Purpose Camera (AK-UB300G) and peripheral devices is as follows.
For details on the connected devices, refer to the Operating Instructions of each device.
Refer to the following website for the latest information other than the information described in the Operating Instructions.
http://pro-av.panasonic.net/
Basic conguration devices
The standard system conguration includes lens, Multi-Purpose Camera, and remote camera controller.
Part name Part No. Remark
Lens FUJINON/CANON —
Remote camera controller AW-RP50N/AW-RP50E/AW-RP120G This is a controller to control the Multi-Purpose
Camera, remote camera and the pan head.
System block diagram
This is the conguration to connect one AK-UB300G and one remote camera controller.
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PT ACTIVEAUTOIRIS
AUTO
HILOW
PTZ/FOCUS SPEED PAN/TILTFOCUS/PUSH OTAF
TELE
ZOOM
WIDE
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
1 2 3
AWB/ABB
4
SHUTTER
5
1 2 345
6 7 8 9 10
a
b
c
IRIS
e
ZOOM/FOCUS
d
f
g
(AK-UB300G)
a: Remote control lens
b: HD monitor (for HD main line)
c: HD monitor (for HD monitor)
d: External DC power supply
e: UHD/HD monitor (for UHD/HD main line)
f: AW-RP120G
g: AW-RP50N/AW-RP50E
fVideo output
For UHD mode
-For UHD main line: Use the output from the <UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals.
-For HD main line: Use the output from the <HD SDI OUT 1> terminal.
-For HD monitor: Use the output from the <HD SDI OUT 2> terminal
For UHD CROP mode/HD mode
-For HD main line: Use the output from the <HD SDI OUT 1> terminal, or the output from the <UHD/HD SDI OUT 1>/<UHD/HD SDI OUT 2> terminal
-For HD monitor: Use the output from the <HD SDI OUT 2> terminal
@@NOTE
tPressing the <MENU> button will display the menu in the output from the <HD SDI OUT 2> terminal.

– 12 –
Chapter 1 Overview — Using the camera in a system
fRemote camera controller
Connect AW-RP50N/AW-RP50E or AW-RP120G to the <I/F> terminal or the <LAN> terminal.

– 13 –
Chapter 1 Overview — Accessories
Accessories
Mount cap (already attached to the product)
Flange nut (x1)
Wire mounting screws (x 2)
@@NOTE
tProperly dispose of the packaging materials after unboxing the product.

– 14 –
Chapter 1 Overview — Frame frequency setting
Frame frequency setting
When the camera is shipped, the frame frequency is not set. Before using the camera for the rst time, follow the steps below to set the frame
frequency.
PLEASE SELECT FORMAT TYPE
FROM THE ITEM BELOW
SELECT FORMAT TYPE
59.94Hz
50Hz
SET FORMAT TYPE 59.94Hz?
NO
YES
Fig. 1 Fig. 2
1 Connect a monitor to the <HD SDI OUT 2> terminal (page 19).
2 Connect the DC power supply.
The [SELECT FORMAT TYPE] screen is displayed.
3 Turn the jog dial button to move the cursor (arrow) to the frequency to set. (Fig. 1)
4 Press the jog dial button.
The conrmation screen is displayed.
5 Move the cursor (arrow) to [YES] and press the jog dial button. (Fig. 2)
The menu screen is displayed, and the setting is completed.
This screen is not displayed again when the power is turned on next and subsequently once this is set.
6 Disconnect the DC power supply.
7 Turn on the DC power supply.

This chapter describes the names of the parts, functions, and operations of this camera.
Chapter 2 Description of Parts

– 16 –
Chapter 2 Description of Parts — Front side
Front side
2
1
3
1 Front tally lamp
Lights up when the tally signal is supplied.
Blinks in red while displaying warning, and blinks in green during the rmware update.
@@NOTE
tThe brightness can be set with [MAIN MENU] →[SWITCH MODE] →[TALLY] →[FRONT TALLY]. Blinks in green [LOW] regardless of setting
during the rmware update.
2 Lens mount (2/3 type bayonet)
This is where the lens is mounted.
3 Lens xing lever
Fix the lens by turning the lever clockwise after mounting the lens to the lens mount.

– 17 –
Chapter 2 Description of Parts — Left side
Left side
1
1 < > mark
Indicates the imaging plane inside the camera.

– 18 –
Chapter 2 Description of Parts — Right side
Right side
1
1 < > mark
Indicates the imaging plane inside the camera.

– 19 –
Chapter 2 Description of Parts — Rear side
Rear side
1
2
3
4
5
6
7
9
11
8
10
14
12
13
15
1 Back tally lamp
Lights up when the tally signal is supplied.
Blinks in red while displaying warning, and blinks in green during the rmware update.
@@NOTE
tThe brightness can be set with [MAIN MENU] →[SWITCH MODE] →[TALLY] →[BACK TALLY]. Blinks in green [LOW] regardless of setting during
the rmware update.
2 <MENU> button
Press this button to display the camera’s [MAIN MENU] screen.
Press the button again to return to the original image.
3 Jog dial button
This will perform the navigation of setting menu pages, and selection or setting of the item when the setting menu is displayed.
The cursor will move down when the jog dial button is turned downward. The cursor will move up when turned upward.
Press the jog dial button to x the settings.
4 <I/F> terminal
Connect the cable for the external synchronization signal and the control signal to the camera.
For specication of the connection cable, refer to “Details of the connector signals” (page 107).
5 <LAN> terminal
Used to connect the LAN cable.
@@NOTE
tUse a shielded cable when connecting a cable to the <LAN> terminal.
6 <WARNING> lamp
This will illuminate in red when a problem occurs.
7 <IRIS> terminal
Used to connect the lens iris control cable.
8 <TALLY OUT> terminal
Outputs R tally and G tally.
9 <ZOOM/FOCUS> terminal
Used to connect the lens zoom/focus control cable.
10 <HD SDI OUT 1> terminal
This is the main line output terminal dedicated for HD SDI. Any character other than the camera ID cannot be superimposed to the output.
@@NOTE
tUse a cable that is 5C-FB or above.
11 <G/L IN> terminal
This is the reference signal input terminal when applying external synchronization to the camera.
@@NOTE
tSupply a composite signal (black burst) or a tri-level SYNC as the input signal.
12 <HD SDI OUT 2> terminal
This is the monitor output terminal dedicated for HD SDI. Characters can be superimposed on the output.
@@NOTE
tUse a cable that is 5C-FB or above.
13 <DC IN> lamp
This will illuminate in green when power is supplied to the camera.
14 <DC IN> terminal
This is an input terminal for the external DC power supply. Connects to the external DC power supply. (DC 11 V to 17 V)
15 <UHD/HD SDI OUT 1>/<UHD/HD SDI OUT 2>/<UHD/HD SDI OUT 3>/<UHD/HD SDI OUT 4> terminal
UHD and HD SDI main line output terminals. Characters cannot be superimposed on the output.
@@NOTE
tUse a cable that is 5C-FB or above.

– 20 –
Chapter 2 Description of Parts — Upper side
Upper side
321
1 Drop prevention wire mounting screw hole
fMounting hole size
-M4
2 Mounting screw holes
This is used when installing in a camera housing, etc.
fMounting hole size
-1/4-20 UNC (x 3)
@@NOTE
tDepth of the screw hole is 10 mm. Use mounting screws 10 mm or shorter.
3 Cooling fan
This is the fan for cooling the unit.
fDo not block or disturb the ventilation while operation. Doing so may cause re due to overheating.
fExpected life of this fan is approximately 60,000 hours. (When used at room temperature of 25 ºC) Replace when it reaches the expected life.
fBe sure to contact your dealer for the replacement.