Panasonic DMC-CM1 Installation and service instructions

Please read these instructions carefully before using this product, and
save this manual for future use.
More detailed owner’s manual is available in “Owner’s
Manual for advanced features (PDF format)”. To read it,
download it from the website.
http://panasonic.jp/support/dsc/oi/index.html?model=
DMC-CM1&dest=P
≥Click the desired language.
≥You will need Adobe Reader to browse or print the Owner’s
Manual (PDF format).
You can download and install a version of Adobe Reader
that you can use with your OS from the following website. (As of March 2015)
http://www.adobe.com/products/acrobat/readstep2.html
If you have any questions, visit:
USA : www.panasonic.com/support
Basic Owner’s Manual
Digital Camera
Model No. DMC-CM1
SQT0433
F0415MR0
P
Register online at www.panasonic.com/register (U.S. customers only)
until
2015/04/13
DMC-CM1P-SQT0433_eng.book 1 ページ ２０１５年４月１３日 月曜日 午後１時１分

2SQT0433 (ENG)
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the
market today. Used properly, we’re sure it will bring you and your family years of
enjoyment. Please take time to fill in the information below. The serial number is
located on the nameplate inside the card slot cover. Be sure to retain this manual
as your convenient camera information source.
Please note that the actual controls and components, menu items, etc. of your
Digital Camera may look somewhat different from those shown in the illustrations
in this Owner’s Manual.
Carefully observe copyright laws.
≥Recording of pre-recorded tapes or discs or other published or broadcast material for
purposes other than your own private use may infringe copyright laws. Even for the purpose
of private use, recording of certain material may be restricted.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
DMC-CM1P-SQT0433_eng.book 2 ページ ２０１５年４月１３日 月曜日 午後１時１分

3
(ENG) SQT0433
Information for Your Safety
∫Product identification marking
∫Wi-Fi use
≥This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz
frequency range.
FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz
to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to
5.85 GHz bands.
These radar stations can cause interference with and/or damage this product.
≥This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
≥The usage of wireless LAN may be restricted depending on the country of use.
Check any relevant laws and regulations in the country or the region before use.
WARNING:
To reduce the risk of fire, electric shock or product damage,
≥Do not expose this unit to rain, moisture, dripping or splashing.
≥Use only the recommended accessories.
≥Do not remove covers.
≥Do not repair this unit by yourself. Refer servicing to qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily
accessible.
Product Location
Digital Camera In the card slot cover
AC Adaptor Bottom
DMC-CM1P-SQT0433_eng.book 3 ページ ２０１５年４月１３日 月曜日 午後１時１分

4SQT0433 (ENG)
∫About the AC adaptor
FCC Note:
This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This product generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception, which
can be determined by turning the product off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the product and receiver.
≥Connect the product to an outlet on a circuit different from that to which the receiver is
connected.
≥Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued FCC emission limit compliance, use only
shielded interface cables with ferrite core when connecting to computer or
peripheral devices.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://www.panasonic.com/contactinfo
This product complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This product may not cause harmful interference, and
2. This product must accept any interference received, including interference
that may cause undesired operation.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
≥Do not install or place this unit in a bookcase, built-in cabinet or in another
confined space. Ensure this unit is well ventilated.
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC
power supply only.
≥When connecting to an AC supply outside of the U.S.A. or Canada, use a plug
adaptor to suit the AC outlet configuration.
DMC-CM1P-SQT0433_eng.book 4 ページ ２０１５年４月１３日 月曜日 午後１時１分

5
(ENG) SQT0433
∫About the battery
≥Do not heat or expose to flame.
≥Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
∫Using hearing aids with mobile devices
≥When some wireless mobile devices are used near some hearing devices (hearing
aids and cochlear implants), users may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others to this interference noise, and
mobile devices also vary in the amount of interference they generate.
In the event of interference you may want to consult your hearing aid supplier to
discuss solutions.
≥The wireless telephone industry has developed ratings for some of their mobile
devices, to assist hearing device users in finding mobile devices that may be
compatible with their hearing devices.
Not all mobile devices have been rated.
Mobile devices that are rated have the rating on their box or label located on the box.
The ratings are not guarantees.
Results will vary depending on the user’s hearing device and hearing loss.
If your hearing device happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully.
Trying out the mobile device with your hearing device is the best way to evaluate it for
your personal needs.
≥M-Ratings: Mobile devices rated M3 or M4 are likely to generate less interference to
hearing devices than mobile devices that are not labeled.
M4 is the better/higher of the two ratings.
T-Ratings: Mobile devices rated T3 or T4 are likely to be more usable with a hearing
device’s telecoil (“T-Coil Switch” or “Telephone Switch”) than unrated mobile devices.
T4 is the better/higher of the two ratings.
(Note that the hearing aid telecoil must be activated in order for it to function, and that
not all hearing devices have telecoils in them.)
≥Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device.
The more immune your hearing aid is, the less likely you are to experience
interference noise from mobile devices.
The HAC rating and measurement procedure are described in the American National
Standards Institute (ANSI) C63.19 standard.
DMC-CM1P-SQT0433_eng.book 5 ページ ２０１５年４月１３日 月曜日 午後１時１分

6SQT0433 (ENG)
∫Hearing aid compatibility
This mobile device has been tested and rated for use with hearing aids for some of the
wireless technologies that it uses.
However, there may be some newer wireless technologies used in this mobile device
that have not been tested yet for use with hearing aids.
It is important to try the different features of this mobile device thoroughly and in different
locations, using your hearing aid or cochlear implant, to determine if you hear any
interfering noise.
Consult your service provider or the manufacturer of this mobile device for information on
hearing aid compatibility.
If you have questions about return or exchange policies, consult your service provider or
mobile retailer.
Regulatory information
∫This product and your health
This product, like other radio devices, emits radio frequency electromagnetic energy.
Because this product operates within the guidelines found in radio frequency safety
standards and recommendations, we believe this product is safe for use by consumers.
These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the
proprietor of the building or responsible representatives of the organization.
These situations may for example include:
≥Using this product on board of airplanes, or
≥In any other environment where the risk of interference to other devices or services is
perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific
organization or environment (e.g. airports), you are encouraged to ask for authorization
to use this product prior to turning on the product.
∫Information to the user
We are not responsible for any radio or television interference caused by unauthorized
modification of this product.
The correction of interference caused by such unauthorized modification will be the
responsibility of the user.
We and our authorized resellers or distributors are not liable for damage or violation of
government regulations that may arise from failing to comply with these guidelines.
DMC-CM1P-SQT0433_eng.book 6 ページ ２０１５年４月１３日 月曜日 午後１時１分

7
(ENG) SQT0433
Additional safety precautions
∫Posted facilities
Turn off the product when in hospitals, health care facilities, or any facility where posted
notices require you to do so.
Hospitals and health care facilities may be using equipment that could be sensitive to
external RF energy.
∫Pacemakers
≥The Health Industry Manufacturers Association recommends that a minimum
separation of six (6) inches be maintained between a handheld wireless product and a
pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
≥Persons with pacemakers:
– Should always keep this product more than six (6) inches from their pacemaker
when this product is turned on;
– Should use the ear opposite the pacemaker to minimize the potential for
interference;
– Should not carry this product in a breast pocket;
– Should turn off the product immediately if there is any reason to suspect that
interference is taking place.
∫Hearing aids
Some digital wireless products may interfere with some hearing aids.
In the event of such interference, consult the manufacturer of your hearing aid to discuss
alternatives.
∫Other medical devices
If you use any other personal medical device, consult the manufacturer of your device to
determine if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
∫Aircraft
Turn off the product after boarding an aircraft, when instructed by flight staff.
Obey instructions from flight staff regarding the use of the product in flight.
Using this product in an aircraft may be hazardous to the aircraft’s operation and disrupt
wireless communication, and may also be illegal.
DMC-CM1P-SQT0433_eng.book 7 ページ ２０１５年４月１３日 月曜日 午後１時１分

8SQT0433 (ENG)
∫Potentially explosive atmosphere
≥Turn off the product in areas where a potentially explosive atmosphere exists and obey
all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting in injury or even death.
≥Areas with potentially explosive atmosphere may include fueling areas, chemical
plants, below deck on boats, fuel or chemical transfer or storage facilities, vehicles
using petroleum or natural gas, or areas where the atmosphere contains particles such
as grain, dust, or metallic powders, and any other area where you would normally be
advised to turn off your vehicle engine.
∫Electronic devices
This product receives and transmits radio frequency signals while switched on.
Most electronic equipment is shielded from RF signals. However, certain electronic
equipment may not be shielded against the RF signals from this product. Therefore, the
use must be restricted in certain situations to avoid interference.
∫Driving
≥Give full attention to driving.
Driving safely is your first responsibility.
≥Pull off the road and park before placing or answering a call.
It is unsafe to operate the product while driving.
≥Check the laws and regulations in the areas where you drive, and always obey them.
≥Only qualified personnel should install the product in a vehicle.
Check regularly that the product is securely mounted in your vehicle and operating
properly.
≥Do not place or install the product in the area over the air bag or in the air bag
deployment area.
If the air bag inflates, serious injury and/or damage could result.
≥RF signals may affect improperly installed or inadequately shielded electronic systems
in motor vehicles.
Consult the manufacturer (or its representative) of the vehicle and any equipment that
has been added to the vehicle regarding the use of class B devices.
≥Use hands-free operation, if available and legally permitted.
∫Emergency communications
Never rely solely on a mobile product for essential or emergency communications.
Network connections can be affected by remaining battery level, radio signals, service
networks, and other conditions, and as a result, emergency communications cannot be
guaranteed in all conditions.
DMC-CM1P-SQT0433_eng.book 8 ページ ２０１５年４月１３日 月曜日 午後１時１分

9
(ENG) SQT0433
∫Antenna
≥Do not replace the antenna.
Unauthorized antennas, modifications, or attachments could damage the product and
may violate FCC regulations.
≥Do not touch or cover the antenna area while the product is on.
Call quality, power levels, and the overall performance of the product may be affected.
∫Camera flash
The flash uses an LED that produces strong light.
To prevent injury to human eyes, do not look directly at the flash with the naked eye or
point it at other people’s eyes.
∫Intended use
≥This product is not intended for use as, or as part of, nuclear equipment/systems, air
traffic control equipment/systems, aircraft cockpit equipment/systems¢1, medical
devices or accessories, life-support systems or other equipment/devices/systems that
are involved with ensuring human life or safety.
Panasonic will not be responsible for any liability resulting from the use of this product
arising out of the foregoing uses.
¢1 Aircraft cockpit equipment/systems include Class 2 Electrical Flight Bag (EFB)
Systems and Class 1 EFB Systems when used during critical phases of flight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class 1 EFB
Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A
or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
≥Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g.,
Flammability/Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to
aviation standards and medical equipment standards that differ from the specifications
of our COTS (Commercial-Off-The-Shelf) products.
≥This product is not intended for use in medical equipment including life-support
systems, air traffic control systems, or other equipment, devices or systems that are
involved with ensuring human life or safety.
Panasonic cannot be held responsible in any way for any damages or loss resulting
from the use of this unit in these types of equipment, devices or systems, etc.
DMC-CM1P-SQT0433_eng.book 9 ページ ２０１５年４月１３日 月曜日 午後１時１分

10 SQT0433 (ENG)
Contents
Information for Your Safety................ 3
Regulatory information ...................... 6
Additional safety precautions ............ 7
Preparation
Standard Accessories...................... 11
Names and Functions of
Main Parts ....................................... 12
Inserting/Removing the microSIM
card (optional) ................................. 14
About the Built-in Memory/
the microSD Card (optional)............ 16
Charging.......................................... 18
Basic
Turning the unit on/off ..................... 19
Using the touch screen ................... 20
Home screen................................... 21
Status bar ........................................ 22
Using apps ...................................... 23
Entering Text ................................... 24
Android™ default settings ............... 25
Accessibility settings ....................... 26
Connecting to networks
Connecting to mobile networks ....... 27
Connecting to Wi-Fi® networks........ 28
Camera
Launching the camera..................... 29
Viewing Recording screens............. 29
Selecting the Recording Mode ........ 31
Taking a Still picture ........................ 32
Recording Motion Picture................ 36
Viewing pictures and
motion pictures................................ 37
Email/Web browser/Phone
People..............................................38
Email/Gmail™..................................39
Launching the web browser.............41
Phone ..............................................42
Others
Troubleshooting ...............................44
System updates ...............................46
Cautions for Use ..............................47
FCC RF exposure information .........53
Specifications...................................54
Digital Camera Accessory Order
Form ................................................58
Limited Warranty
(ONLY FOR U.S.A.).........................59
∫About the symbols in the text
: Indicates a general notification.
In this owner’s manual, steps for
setting a menu item are
described as follows.
From the Home screen >
[] > [].
DMC-CM1P-SQT0433_eng.book 10 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
11
(ENG) SQT0433
Standard Accessories
Check that all the accessories are supplied before using this unit.
Product numbers correct as of March 2015. These may be subject to change.
≥microSD Memory Card, microSDHC Memory Card and microSDXC Memory Card are
indicated as microSD card in the text.
≥microSIM card and microSD card are optional.
≥If accessories are lost, customers can visit us at www.panasonic.com/support for further
information about obtaining replacement parts.
AC Adaptor
VSK0825
DMC-CM1P-SQT0433_eng.book 11 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
12 SQT0433 (ENG)
Names and Functions of Main Parts
1
7810
2345
6
11 13 14 15
12
19 20 21
16
22
17
18
9
1 Shutter button (P32)
2 Camera selector switch (P29)
3 Flash/AF Assist Lamp
4 [ ] button (P19)
5 [ ]/[ ] buttons
6Speaker
7 NFC antenna
8 Control ring (P33)
9 Lens front ring (Diameter: 37 mm)
10 Outward facing camera (P29)
11 Microphone
12 microUSB terminal (P18)
13 Ringtone lamp/Charging lamp
(P18)
14
Light sensor/Proximity sensor
Do not cover the sensor area with
your hand or paste stickers over it in
order to prevent incorrect operation of
the sensor.
15 Display (P20)
16 Earpiece
17 Earphone terminal (P13)
18 Inward facing camera
19 microSIM card slot (P14)
20 microSD card slot (P17)
21
Nameplate
Stowable nameplate.
Contains information such as the
mobile identification number.
22 Mouthpiece/Microphone
DMC-CM1P-SQT0433_eng.book 12 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
13
(ENG) SQT0433
You can use a headset (optional) to listen to music or watch videos.
If the headset (optional) has a microphone, you can also use it to talk on the
phone.
Stereo headset (optional)
≥Check that the headset (optional) plug is completely inserted into the earphone
terminal.
≥Excessive sound pressure from earphones and headphones can cause hearing loss.
≥To prevent possible hearing damage, do not listen at high volume levels for long
periods.
≥Being unable to hear sounds in your environment may lead to accidents.
DMC-CM1P-SQT0433_eng.book 13 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
14 SQT0433 (ENG)
Inserting/Removing the microSIM card
(optional)
A microSIM card is an integrated circuit that stores the customer’s phone number
and other information.
Calls and messages (SMS) cannot be sent or received unless the microSIM card
is inserted.
If you have inserted/removed the microSIM card, do not deliberately touch or
damage the IC terminals.
1Open the card slot cover with the control ring face of this unit
facing upwards.
2Hold the hooks of the tray with your fingertips and pull it out
horizontally.
3Mount the microSIM card on the tray C with the IC face A on
top.
≥Take note of the notch B on the microSIM card and mount it in the correct direction.
4Check the orientation of this unit and insert the tray
horizontally into the slot of the microSIM card.
5Close the card slot cover.
DMC-CM1P-SQT0433_eng.book 14 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
15
(ENG) SQT0433
∫About the mobile identification number
This unit has a specific mobile identification number A.
The mobile identification number is verified as follows.
To verify the number on-screen:
1From the Home screen > [ ] > [ ].
2[About phone] > [Status] > check the [IMEI] item.
To verify the number by checking the
nameplate:
1Open the card slot cover.
2Remove the microSIM card tray.
3Pull the nameplate towards you.
≥Be careful as the nameplate may be damaged
if it is pulled too hard.
∫About the FCC ID
The FCC ID B is verified as follows.
1Open the card slot cover.
2Remove the microSIM card tray.
3Pull the nameplate towards you.
≥Be careful as the nameplate may be damaged
if it is pulled too hard.
4Check the reverse side of the nameplate.
≥Keep the microSIM Card out of reach of children to prevent swallowing.
≥Keep the microSIM Card Tray out of reach of children to prevent swallowing.
(Reverse side)
DMC-CM1P-SQT0433_eng.book 15 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
16 SQT0433 (ENG)
About the Built-in Memory/the microSD
Card (optional)
About Built-in Memory
≥Memory size: Approx. 10 GB
≥The access time for the built-in memory may be longer than the access time for a
microSD card.
≥You can copy the recorded pictures to a microSD card. (P37)
About microSD cards that can be used with this unit
The following microSD cards which conform to the SD standard can be used
with this unit.
(These cards are indicated as microSD card in the text.)
≥microSD Memory Card (64 MB to 2 GB)
≥microSDHC Memory Card (4 GB to 32 GB)
≥microSDXC Memory Card (64 GB to 128 GB)
≥Check the corresponding manufacturer, capacity and other latest compatibility
information from the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note that this does not guarantee compatibility with all operations.
≥microSDHC Memory Cards and microSDXC Memory Cards can be used only with
their compatible devices.
≥A message prompting to format the microSD card may be displayed when connecting
the microSD card to other devices, but do not format.
DMC-CM1P-SQT0433_eng.book 16 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
17
(ENG) SQT0433
∫About the motion picture recording and SD speed class
∫Inserting/Removing the microSD card
1Open the card slot cover, ensure that the connection terminal of the microSD card
is facing down, and insert it firmly in the correct direction until it makes a “click”
sound.
ADo not touch the connection terminals of the microSD card.
≥To remove, push in the card until it makes a “click” sound and then pull it out straight.
2Close the card slot cover.
According to the [Rec Quality] (P36) of a motion picture, the required microSD card
differs. Use a microSD card that meets the following rating of the SD Speed Class.
≥SD Speed Class is the speed standard regarding continuous writing. Check via the
label on the microSD card, etc.
≥The SD speed class represents the level of performance of microSD cards. The SD
speed class does not serve as a guarantee of performance for all operations.
[Rec Quality] SD Speed class Label example
FHD/HD/VGA/1:1 Class 4 or higher
4K Class 10
≥The data on the built-in memory or the microSD card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of this unit or the microSD card.
We recommend storing important data on a PC etc.
≥Keep the microSD Card out of reach of children to prevent swallowing.
DMC-CM1P-SQT0433_eng.book 17 ページ ２０１５年４月１３日 月曜日 午後１時１分

Preparation
18 SQT0433 (ENG)
Charging
Connect the unit and AC adaptor to charge.
≥The battery is not charged when this unit is shipped. Charge the battery before use.
≥For details on charging time, refer to P54.
1
Open the microUSB terminal cover, check the direction of the AC
adaptor cable terminal, and insert it into the microUSB terminal.
2Insert the AC adaptor power plug into the power outlet.
∫When charging is complete
1Remove the AC adaptor power plug from the power outlet.
2Remove the AC adaptor cable terminal from the unit.
≥The unit and AC adaptor may become warm while charging, however this is not
a malfunction.
≥Remove the AC adaptor from the power outlet after completely charging the
battery in order to save power and maintain battery performance.
≥The shape of the AC adaptor power plug and power outlet may differ depending on
each country/region.
≥Do not use any other AC adaptors except the supplied one.
≥Do not leave any metal items (such as clips) near the contact areas of the power
plug.
≥When you start charging an empty battery, the charging lamp may flash. This is not a
malfunction. The charging lamp stops flashing and lights up after the battery is
charged for a while.
To power outlet
AC adaptor
microUSB terminal
Charging lamp
On: Charging.
Off: Charging has completed.
DMC-CM1P-SQT0433_eng.book 18 ページ ２０１５年４月１３日 月曜日 午後１時１分

Basic
19
(ENG) SQT0433
Turning the unit on/off
Turn on the unit by pressing [ ] for
2 seconds or more.
≥The lock screen will be displayed after a short time.
≥The default settings screen will be displayed when you turn the
unit on for the first time. (P25)
≥Press [ ] to enter/release sleep mode, when the unit is turned
on.
∫To turn the unit off
Press [ ] for 1 second or more > [Power off] > [OK].
∫To restart
Press [ ] for 1 second or more > [Reboot] > [OK].
Slide [ ] until the guide (white line
on the outer circumference) A.
≥If the [Screen lock] settings have been changed,
use the method configured to release the lock.
Release the lock screen
A
DMC-CM1P-SQT0433_eng.book 19 ページ ２０１５年４月１３日 月曜日 午後１時１分

Basic
20 SQT0433 (ENG)
Using the touch screen
The unit features a touch screen, which you can operate by touching directly with
your fingers.
≥Peel off the sheet pasted to the touch screen when first bought before use.
≥The touch screen is designed to be lightly touched with a finger.
Do not press the touch screen strongly with your finger or press objects with sharp tips (claws/
ball point pens/pins etc.) against it.
≥The touch screen may not work even when touched in the following cases. Please note that
they may also result in incorrect operations.
– Operating with gloves on your hand
– Operating with your fingertips
– Operating with foreign objects on top of the operating surface
– Operating with a protective sheet, seal, etc. pasted on top
– Operating with the touch screen wet
– Operating with your fingers wet with sweat or water
Tapping
Tap an item or icon to select
it.
Double-tapping
Tap the touch screen
quickly two times when you
want to zoom in and out of
webpages, etc.
Tapping and holding
Tap an item or icon without
releasing your finger.
Use this to display a context
menu.
Flicking
Moving your finger quickly
across the touch screen will
move back and forth
through numerous pictures.
Dragging
Tap an item or icon without
releasing your finger and
slide it.
Scrolling
Flick/drag your finger
around the screen to
display a hidden area.
Pinching
When displaying a webpage
or picture, use two fingers
to push the screen apart
and zoom in (pinch out), or
bring them together to zoom
out (pinch in).
∫Switching between vertical
and horizontal viewing modes
The unit switches the screen between
vertical and horizontal viewing modes
depending on its motion sensor that
can detect the unit’s direction and
movement.
DMC-CM1P-SQT0433_eng.book 20 ページ ２０１５年４月１３日 月曜日 午後１時１分