Panasonic DMC-FT6GA User manual

© Panasonic Corporation 2015 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO.DSC1504013AE
B26
Digital Camera
Model No. DMC-FT6GA
DMC-FT6GN
DMC-TS6P
Colour
(A).........Blue Type
(R).........Red Type
(D).........Orange Type
(Z).........Camouflage Type (Except GA)
TABLE OF CONTENTS
PAGE PAGE
1Introduction-------------------------------------------------------- 2
2 Service Navigation ----------------------------------------------- 3
2.1. How to Define the Model Suffix (NTSC or PAL
model) -------------------------------------------------------- 3
3 Specifications ----------------------------------------------------- 6
4 Replacement Parts List -------------------------------------- 10
4.1. Electrical Component ----------------------------------- 10
4.2. Frame and Casing Section ---------------------------- 11
4.3. Packing and Accessories Section ------------------- 12
5 Exploded View --------------------------------------------------- 13
Please use this manual together with the service manual for
Model No.DMC-FT5EG/EP/EF/EB/EE/GC/GA/GN/EA,DMC-TS5P/PC/PU/GH/GT/GD :
Order No.DSC1304010CE.

2
1 Introduction
• The purpose of issuing this Service Manual is that to introduce the following newly added models.
DMC-FT6GA/GN,DMC-TS6P.
• This Service Manual contains technical information which will help service personnel to understand and service the
Digital Camera ; DMC-FT6GA/GN,DMC-TS6P.
• Since this Service Manual does not cover the same part which is already described in the Original Service Manual for
DMC-FT6,TS6 series series, when servicing, refer to the descriptions in the Service Manual for
DMC-FT5EG/EP/EF/EB/EE/GC/GA/GN/EA,DMC-TS5P/PC/PU/GH/GT/GD Order No.DSC1304010CE.

3
2 Service Navigation
2.1. How to Define the Model Suffix (NTSC or PAL model)
There are seven kinds of DMC-FT6/TS6, regardless of the colours.
• a) DMC-TS6P
• b) DMC-FT6GN
• c) DMC-FT6GA
What is the difference is that the "INITIAL SETTINGS" data which is stored in Flash ROM mounted on Main P.C.B.
2.1.1. Defining methods
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
Note:
After replacing the Main P.C.B., be sure to achieve adjustment.
The Maintenance software (DIAS) is available at "software download" on the "Support Information from NWBG/VDBG-AVC"
web-site in "TSN system".

4
2.1.2. INITIAL SETTINGS
After replacing the Main P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully
• Preparation:
1. Attach the Battery to the unit.
2. Set to PROGRAM AE mode by operating the mode button.
Note:
If the picture mode is other than PROGRAM AE mode, it does not display the initial settings menu.
•Step 1. The temporary cancellation of "INITIAL SETTINGS":
While keep pressing "UP of Cursor button" and MOTION PICTURE button simultaneously, turn the Power on.
•Step 2. The cancellation of "INITIAL SETTINGS":
Press the PLAYBACK button.
Press "UP of Cursor button" and MOTION PICTURE button simultaneously, then turn the Power off.
•Step 3. Turn the Power on:
Turn the Power on.
•Step 4. Display the "INITIAL SETTINGS" menu:
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "INITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing Main P.C.B.]
When Main P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Four pages in total)
[CASE 2. Other than "After replacing Main P.C.B."]

5
•Step 5. Choose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION 1")
[Caution: After replacing Main P.C.B.]
The model suffix can be chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "UP / DOWN of Cursor buttons".
•Step 6. Set the model suffix at "INITIAL SETTINGS":
Press the "RIGHT of Cursor buttons".
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
•Step 7. CONFIRMATION:
Confirm the display of "PLEASE SET THE CLOCK" in concerned language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
Default setting (After "INITIAL SETTINGS")
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
a) DMC-FT6GA PAL English Date/Month/Year
b) DMC-FT6GN PAL English Date/Month/Year
c) DMC-TS6P NTSC English Month/Date/Year

6
3 Specifications
The following specification is for DMC-TS6P.
Some specifications may differ depending on model suffix.

7

8

9

10
4 Replacement Parts List
4.1. Electrical Component
COMPARISON CHART :
4.1.1. DMC-FT6GA
The following tables show the difference between original Model “DMC-FT5GA” and new model “DMC-FT6GA”.
4.1.2. DMC-FT6GN
The following tables show the difference between original Model “DMC-FT5GN” and new model “DMC-FT6GN”.
4.1.3. DMC-TS6P
The following tables show the difference between original Model “DMC-TS5P” and new model “DMC-TS6P”.
Safety Ref No. Original Part No.
(DMC-FT5GA)
New Part No.
(DMC-FT6GA)
Part Name & Descriptions Pcs Remarks
FP9002 K1MY41BA0575 K1MY41BA0667 CONNECTOR 41P 1
FP9003 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9007 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9008 K1MY19BA0235 K1MY19BA0667 CONNECTOR 19P 1
IC6001 VSG1017 VSG1023 IC 1 E.S.D.
IC6005 RS10423 RS10786 IC 1 E.S.D.
Safety Ref No. Original Part No.
(DMC-FT5GN)
New Part No.
(DMC-FT6GN)
Part Name & Descriptions Pcs Remarks
FP9002 K1MY41BA0575 K1MY41BA0667 CONNECTOR 41P 1
FP9003 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9007 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9008 K1MY19BA0235 K1MY19BA0667 CONNECTOR 19P 1
IC6001 VSG1017 VSG1023 IC 1 E.S.D.
IC6005 RS10423 RS10786 IC 1 E.S.D.
Safety Ref No. Original Part No.
(DMC-TS5P)
New Part No.
(DMC-TS6P)
Part Name & Descriptions Pcs Remarks
FP9002 K1MY41BA0575 K1MY41BA0667 CONNECTOR 41P 1
FP9003 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9007 K1MY51BA0575 K1MY51BA0667 CONNECTOR 51P 1
FP9008 K1MY19BA0235 K1MY19BA0667 CONNECTOR 19P 1
IC6001 VSG1017 VSG1023 IC 1 E.S.D.
IC6005 RS10423 RS10786 IC 1 E.S.D.