Panasonic Lumix DMC-LX7 Technical specifications

VQT4J03
M0712KZ0
Basic Operating Instructions
Digital Camera
Model No. DMC-LX7
Before use, please read these instructions completely.
More detailed instructions on the operation
of this camera are contained in “Operating
Instructions for advanced features (PDF format)”
in the supplied CD-ROM. Install it on your PC to
read it.
GC GH SG

2 VQT4J03 (ENG)
Dear Customer,
We would like to take this opportunity to thank you for purchasing this
Panasonic Digital Camera. Please read these Operating Instructions
carefully and keep them handy for future reference. Please note
that the actual controls and components, menu items, etc. of your
Digital Camera may look somewhat different from those shown in the
illustrations in these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or
broadcast material for purposes other than your own private use
may infringe copyright laws. Even for the purpose of private use,
recording of certain material may be restricted.
Information for Your Safety
WARNING:
To reduce the risk of fire, electric shock or product damage,
•Do not expose this unit to rain, moisture, dripping or
splashing.
•Use only the recommended accessories.
•Do not remove covers.
•Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
The socket outlet shall be installed near the equipment and shall be
easily accessible.
■Product identification marking
Product Location
Digital camera Bottom
Battery charger Bottom

(ENG) VQT4J03 3
■About the battery pack
CAUTION
• Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
• When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 °C or incinerate.
■About the battery charger
CAUTION!
To reduce the risk of fire, electric shock or product damage,
•Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
• The battery charger is in the standby condition when the AC power supply
cord is connected. The primary circuit is always “live” as long as the power
cord is connected to an electrical outlet.

4 VQT4J03 (ENG)
This product is licensed under the AVC patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video in compliance
with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide AVC Video. No
license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
■Cautions for Use
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Do not use any other USB connection cables except the supplied one or a
genuine Panasonic USB connection cable (DMW-USBC1: optional).
• Always use a genuine Panasonic HDMI mini cable
(RP-CDHM15, RP-CDHM30: optional).
Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m)
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
• If you use this unit on top of or near a TV, he pictures and/or sound on this
unit may be disrupted by electromagne ic wave radiation.
• Do not use this unit near cell phones because doing so may result in noise
adversely affecting the pictures and/or sound.
• Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely
affect this unit, disturbing the pictures and/or sound.
• If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect
AC adaptor (DMW-AC5G: optional). Then reinsert the battery or reconnect AC
adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.
The optional AC adaptor, USB connection cable, HDMI mini cable, and AV
cable are available only for DMC-LX7GC and DMC-LX7GH.
For information about the software used for this product, press [MENU/SET]
and select [Setup] to display [Version Disp.] before pressing [MENU/SET]
again.

(ENG) VQT4J03 5
How to replace the fuse
The location of the fuse differ according to the type of AC cable (figures A and
B). Confirm the AC cable fitted and follow the instructions below.
Illustrations may differ from actual AC cable.
1. Open the fuse cover with a
screwdriver.
Figure A
Figure B Fuse cover
2. Replace the fuse and close or
attach the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B Fuse
(5 ampere)
-If you see this symbol-
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the correct
method of disposal.

6 VQT4J03 (ENG)
Contents
Before use
Information for Your Safety .... 2
Before use ................................ 6
Standard accessories ............. 7
Names and Functions of
Main Parts ................................ 9
Attaching the lens cap and
shoulder strap........................ 12
Charging the battery ............. 13
Inserting and removing the
card (optional)/the battery .... 14
Setting the clock .................... 15
Taking pictures ...................... 16
Viewing your pictures
[Normal Play] ......................... 19
Deleting pictures ................... 19
Setting the menu ................... 20
Reading the Operating
Instructions (PDF format) ..... 21
Supplied software .................. 22
Installing supplied software ... 23
Specifications ........................ 24
■Camera handling
●Keep the camera away from excessive v bration, force, or
pressure.
●The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or
where water can come into contact with the camera.
■Condensation (When the lens or the LCD monitor is fogged up)
●Condensation may occur when the camera is exposed to sudden
changes of temperature or humidity. Avoid these conditions, which
may make the lens or LCD monitor dirty, cause mould, or damage
the camera.
●If condensation does occur, turn off the camera and wait about two
hours before using it. Once the camera adjusts to the surrounding
temperature, the fogging will clear naturally.

(ENG) VQT4J03 7
Standard accessories
Check that all the accessories are supplied before using the camera.
Part numbers are as of July 2012. These may be subject to change.
Battery pack
DMW-BCJ13E
• Charge the battery
before use.
Battery pack is indicated as
battery pack or battery in the
text.
Battery charger
DE-A82B
( DMC-LX7GC/
DMC-LX7GH)
DE-A82D
(DMC-LX7SG)
Battery charger is indicated as
battery charger or charger in
the text.
AC cable
K2CT3YY00034
( DMC-LX7GC/
DMC-LX7GH)
• In Saudi Arabia, always
use it.
K2CQ2YY00082
(DMC-LX7GC)
K2CA2YY00247
(DMC-LX7SG)
Shoulder strap
VFC4901
USB connection
cable
K1HY08YY0025
CD-ROM
• Software:
Use it to install
the software on
your PC.
CD-ROM
VFF1041
• Operating
Instructions for
advanced features
Hot shoe cover*
VKF4970
Thread protector*
VGQ1H81 (Black)
VGQ1H82 (White)
Lens cap*
VYK5W85 (Black)
VYK5W86 (White)
Lens cap string
VFC4366
* Already attached to the camera at the time of purchase.

8 VQT4J03 (ENG)
Standard accessories
• SD Memory Card, SDHC Memory Card and SDXC Memory Card
are indicated as card in the text.
• Cards are optional. You can record or play back pictures on the
built-in memory when you are not using a card.
• Consult the dealer or your nearest Service Centre if you lose
the supplied accessories. (You can purchase the accessories
separately.)
• Please dispose of all packaging appropriately.
• Keep small parts in a safe place out of the reach of children.
• The illustrations and screens in this manual may differ from the
actual product.

(ENG) VQT4J03 9
Names and Functions of Main Parts
Camera ON/OFF switch
Built-in flash (flash)
Self-timer indicator /
AF Assist Lamp
Shoulder strap eyelet
• Attach the supplied shoulder strap
and lens cap string to this eyelet.
Focus selector switch
Thread protector
Lens
Aperture ring
Aspect ratio selector switch
Zoom lever
Motion picture button
Shutter button
Mode dial
Microphone

10 VQT4J03 (ENG)
Names and Functions of Main Parts
LCD monitor
[ND/FOCUS] lever
Rear dial
Status indicator
Cursor buttons
[MENU/SET]
[Q.MENU]/[ ]
(Delete/Cancel) button
[DISP.] button
Flash open switch
Hot shoe (Hot shoe cover)
[AF/AE LOCK]
button
Playback button
• Switches
between
recording mode
and playback
mode.
[HDMI] socket
[AV OUT/
DIGITAL] socket
* Do not attach to a tripod with a 5.5 mm or longer screw. Doing so may
damage this unit.
●
Always use a genuine Panasonic AC adaptor (DMW-AC5G: optional).
●When using an AC adaptor, ensure that the Panasonic DC coupler
(DMW-DCC7: optional) and AC adaptor (DMW-AC5G: optional) are
used.
The optional AC adaptor and DC coupler are available only for
DMC-LX7GC and DMC-LX7GH.
●
Keep the hot shoe cover out of reach of children to prevent swallowing.
●
Be sure to attach the hot shoe cover when the hot shoe is not in use.
Tripod mount*
• Ensure that the tripod is stable.
Card/Battery door
Release lever
DC coupler cover
Speaker

(ENG) VQT4J03 11
■[ND/FOCUS] lever
To operate this lever, move it left or right, or push it in.
Manual Focus
adjustment, etc.
Turning the built-in
ND filter on/off, etc.
When the built-in
ND filter is turned
on, you can use
even slower shutter
speeds or a wider
aperture.
Press
■Rear dial
To operate the dial, rotate it left or right, or push it in.
Shutter speed
adjustment, etc.
Selecting and
setting operation
items, etc.
Press
■Aperture ring
Rotate the ring to adjust the aperture value.
Align with the indicator.
■Built-in flash
The flash opens.
After use, press down the flash until it clicks into place.

12 VQT4J03 (ENG)
Attaching the lens cap and shoulder strap
Cover the lens with the lens cap to protect it when you are not taking
pictures. We also recommend attaching the shoulder strap to prevent
the camera from being dropped.
Use the supplied string to attach the lens cap to
the camera
Attach the lens cap
When taking pictures, remove the
lens cap and turn on the camera.
To attach and remove the lens cap,
press the areas shown by arrows in
the illustration.
Attach the shoulder strap
Shoulder strap
eyelet
• Attach the other end of the shoulder strap.
• Make sure that the shoulder strap does not come loose.

(ENG) VQT4J03 13
Charging the battery
Insert the battery terminals
and attach the battery to the
charger
Ensure [LUMIX] faces outwards.
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On: Charging in progress
(approx. 155 min. if fully depleted)
Off: Charging complete
■About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCJ13E.
•Use the dedicated charger and battery.
•The battery is not charged when the camera is shipped. Charge
the battery and set the clock before use.
•Charge the battery with the charger indoors (10 °C to 30 °C).

14 VQT4J03 (ENG)
Inserting and removing the card
(optional)/the battery
Check that this unit is turned off.
Slide the release lever ( ) to
the [OPEN] position and open
the card/battery door
[OPEN] [LOCK]
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert the battery all the way
firmly until a locking sound
is heard, and check that it is
locked by lever ( ).
• Card: Insert the card all the way
firmly until it clicks.
Do not touch
the terminals
on the back of
the card.
Close the card/battery door
Slide the release lever to the [LOCK] position.
■To remove
•To remove battery:
Move lever in direction of arrow.
Lever
•To remove card:
Push the card until it clicks,
then pull the card out.
●Always use genuine Panasonic batteries (DMW-BCJ13E).
●If you use other batteries, we cannot guarantee the quality of this
product.
●Keep the Memory Card out of reach of children to prevent
swallowing.
●We recommend using a Panasonic card.

(ENG) VQT4J03 15
Setting the clock
The clock is not set when the camera is shipped.
Before using the camera, remove the lens cap.
Turn the camera on ( )
Press [MENU/SET] ( )
Press to select the
language, and press
[MENU/SET]
• [Please set the clock] message
appears.
Press [MENU/SET]
Press to select the items (year, month,
day, hour, minute, display order or time display
format), and press to set
Press [MENU/SET]
Press [MENU/SET] to set
• To return to the previous screen, press [ ] button.
■Changing time settings
Select [Clock Set] from [Rec] or [Setup] menu, perform and .
For details about how to set the menu (→20)

16 VQT4J03 (ENG)
Taking pictures
Before using the camera, remove the lens cap.
Turn the camera on ( ) Shutter button
Motion picture button
Rotate the mode dial to select
the recording mode ( )
■Recording mode
Take pictures with automatic settings.
Take pictures with automatic shutter speed and aperture value settings.
The shutter speed is automatically determined by the aperture value
you set.
The aperture value is automatically determined by the shutter speed
you set.
The exposure is adjusted by the shutter speed and the aperture value
that are manually adjusted.
Record motion pictures with manual operations.
Use his mode to take pictures with previously registered setting.
Take pictures according to the scene.
Take pictures using your preferred picture effects such as [Dynamic
Monochrome] or [Miniature Effect].
Take pictures
■Taking still pictures
(Shutter button)
Press halfway
(press lightly
and focus)
Press fully
(press the button all
the way to record)
■Recording motion pictures
(Motion picture button)
Press
(Start recording)
Press
(End recording)

(ENG) VQT4J03 17
■Use the zoom lever to adjust the range of the picture to
be captured
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
■Select the combination of shutter speed and aperture
value (Mode dial: )
Press the shutter button halfway to measure
the exposure
Press halfway
Rotate the rear dial to select the combination
of shutter speed and aperture value
• Perform this step while the shutter speed
and aperture value are displayed (about
10 seconds).
■Select the aperture value (Mode dial: / )
Rotate the aperture ring to select the aperture value
• You can set the aperture values
between [1.4] and [8] in 1/3-stop
increments. (Set the aperture ring
to a click stop.)
■Select the shutter speed (Mode dial: / )
Rotate the rear dial to select the shutter speed

18 VQT4J03 (ENG)
Taking pictures
■About recording motion pictures
●We recommend you use a battery with sufficient battery power or
the AC adaptor when recording motion pictures.
●If the power supply is cut off due to a power cut or the AC adaptor
being disconnected, the motion picture being recorded using the
AC adaptor will not be recorded.
●About recording time
• You can continuously record a motion picture in [MP4] for up
to 29 minutes 59 seconds or approx. 4 GB. (Since recording in
[MP4] with [FHD] creates larger files, the recording time for such
motion pictures will be shorter than 29 minutes 59 seconds.)
• If [Rec Quality] of [AVCHD] motion pictures is set to [PSH] or
[FSH], you can continuously record a motion picture for up to
29 minutes 59 seconds.
• You can continuously record [AVCHD] motion pictures for up to
29 minutes 59 seconds. (DMC-LX7GC)
●You can record a motion picture to the built-in memory only in
[MP4] using the [VGA] setting.

(ENG) VQT4J03 19
Viewing your pictures [Normal Play]
Deleting pictures
Press the Playback button ( )
Press to select a picture to
be displayed
• You can also rotate the rear dial to
select a picture.
●To play back a motion picture, select a picture with or , and then
press to start playback.
●To switch to recording mode, press the playback button again or
press the shutter button during playback.
Deleted pictures cannot be recovered.
Press [ ] button ( ) to
delete the displayed picture
Press to select [Yes], and
press [MENU/SET] ( )

20 VQT4J03 (ENG)
Setting the menu
Refer to the following procedures to operate the menus.
Example: Setting [AF Mode] from to in the [Program AE]
Mode
Press [MENU/SET] to display
the menu
Press to select [AF Mode]
and then press
Press to select and
then press [MENU/SET] to set
Press [MENU/SET] to close the
menu
Switching to other menus
Press [MENU/SET] to display the menu
Press
Press to select a menu icon
Press
●Depending on the item, its setting may not appear or it may be
displayed in a different way.
●The operation of menus varies depending on the menu.