Panasonic SC-HTB570 User manual

Quick Start Guide
Home Theater Audio System SC-HTB570
Step 1: Choose the configuration that is right for you
Place the speakers horizontally Place the speakers vertically
Push Fully insert the wire.
r: White
s: Blue line
White
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥Tighten screws securely.
Red
Press into the groove.



Push
≥Place the speaker
with the red cable
connector to the
right of the TV.
Place the other
speaker to the left.
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥Tighten screws securely.
1Fully insert the wire.
r: White
s: Blue line
2Press into the groove.
RQCA2111
F0113SB0
SC-HTB570EGEBGN_RQCA2111.fm 5 ページ ２０１２年１２月２１日 金曜日 午後８時１７分

HDMI (ARC)
Audio Return Channel:
Allows a home theater system to receive and play audio from the TV through a HDMI cable without
additional wiring.
HDMI cable is required for VIERA Link “HDAVI Control”.
Turn on the active subwoofer.
On the TV, select this home theater system as the TV’s speakers from the VIERA
Link menu.
Press [iVOL j] on the TV’s remote control to adjust the volume.
≥Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Turn on the main unit, active subwoofer and the TV.
Press [INPUT SELECTOR] to select the TV sound.
Press [iVOL j] to adjust the volume.
Step 2: Connect the cables
Do not connect the AC mains lead to the main unit and the active subwoofer until all other
connections are completed.
When the TV is HDMI (ARC) compatible
When the TV is non HDMI (ARC) compatible
AV OUT
TV(ARC)
AV OUT
TV(ARC)
HDMI IN
(ARC)
TV
Main unit
HDMI cable
Be sure to connect to the
TV’s ARC compatible
terminal. (Refer to the TV's
operating instructions.)
Red
White
AV OUT
TV(ARC)
AV OUT
TV(ARC)
DIGITAL
AUDIO
IN
TV
(OPT1)
HDMI IN
OPTICAL
OUT
TV
Main unit
HDMI cable
Optical digital
audio cable
Red
White
Using this system
When the TV is VIERA Link “HDAVI ControlTM” or
HDMI CEC compatible
≥If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
When the TV is not VIERA Link “HDAVI ControlTM” or
HDMI CEC compatible
≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to
minimum.
For wall mounting and other details, be sure to refer to the Operating Instructions.
e.g. TV remote control
INPUT
SELECTOR
e.g. TV remote control
SC-HTB570EGEBGN_RQCA2111.fm 6 ページ ２０１２年１２月２１日 金曜日 午後８時１７分