Panasonic SC-PT770 User manual

Panasonic'
•
:?l ~ '"
('l ~
~"""""~"",,,,~~
---- -
Operating Instructions
DVD Home Theater Sound System
Model No. SC-PT770
The illustrations shown may differ from your unit.
Region number
The player plays OVO-Video marked with labels containing the region number "1" or "ALL.:'.
Example:
As an ENERGY STAR"Partner~
Panasonic has determined that
this product meets the ENERGY STAR"'
guidelines for energy efficiency.
•For Canada only: The word "Participanr is used in place of the word
"Partner".
Before connecting, operating or adjusting this product, please
read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact
In the U.S.A. and Puerto Rico:
1-800-211-PANA (7262)
In Canada: 1-800-561-5505
V IDE 0
IDIGITAL VIDEO)
C
iRAM!
-
iPLAYER!
HICt<·OEFltIITWN MUlTll.fEOIA rN,!,"E.'RF.ll.CE
IRQTX0221-1 P

The laser product
label has not been
attached
to prodUCts
for the U.S.A. and
Canada.
- ;~;lth~j '~'-i.-t :II!;!". '.~>jJ tt_·l:'Ot.O!-''}
'.J'; .·• .. 0·'·';:< - f,ry;l~"·".
-------~====--==11
---------J/ (Side of product)
CAUTION • _,ll:.f"".:.I ... q:);'Iitf;~~'l.
:1. t.~ 1 :1:.jf ~:'';: .t
p
;.&. "'1. ...... ,'0,",. J,~.j •
For wireless system
Product Identification Marking is located on the bottom of unit.
THE FOLLOWING APPLIES ONLY IN CANADA.
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device mustaccept any interference received, including
interference that may cause undesired operation of the device.
VORSICHT
AnENTION-
For units with PX printed on the outer packaging
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
)t
This symbol is only valid in the European Union.
If you wish to discard this product, please
contact your local authorities
or dealer and ask
_for the correct method
of disposal.
CAUTION •. :.;«, 't" ~i:.sH:(;:t:,~·J:l.·. ,}';·:i!",.~i"11'3i'''''''H, ::!E~i.
':::'IU ;'l{i~·~:':_l'{I1':i::"-:'I"_,· ... nS:·j!.fln. !1:'.~·/~1 .,':";o.~~ "A
VARNING - ,;X:;:- ,l,l "'u j :o::-~S~f.:i.~-: .) .... ~ .:<~~~*' l!~:"'~':':!Il'1V:·;1 .,,: ;'~.' .. ':..
?-:I;~':'!;I~ ~·;.~r<!.,-:fi :,,:.J 1 O£_[ ',' '''·n.,I·IS·;'; !-':;t,.
FORSIGTIG
VAROI
The socket outlet shall be installed near the equipment and easily
accessible.
The mains plug of the power supply cord shall remain readily
operable. To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from AC receptacle.
tl'o
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile telephone.
Wireless system
Subwoofer
Digital transmitter
Center speaker
Surround speakers
Front speakers
Main unit
The lightning flash with arrowhead symbol, within
an equilateral triangle. is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute arisk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence
of
important operating and maintenance (servicing)
instructions
in the literature accompanying the
appliance.
TO REDUCETHE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
CAUTIONl
•DO NOT INSTALL OR PLACE THIS UNIT IN ABOOKCASE,
BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
•DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
•DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES,
ON THE UNIT.
•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
-DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
-USE ONLY THE RECOMMENDED
ACCESSORIES.
-DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTIONl
THIS PRODUCT UTILIZES ALASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
THE FOLLOWING APPLIES ONLY
IN THE U.S.A. AND CANADA.
(For wireless system)
The following mark and symbols are located on bottom of the unit.
Dear customer
-

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits
for a
Class Bdigital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in aresidential installation.
This equipment
generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio
or television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorient
or relocate the receiving antenna.
•Increase
the separation between the equipment and receiver.
•
Connect the equipment into an outlet on acircuit different from that
to which the receiver is connected.
•Consult the dealer
or an experienced radiolTV technician for help.
FCC caution:
To maintain compliance with FCC regulations, shielded
interface cables
must be used with this equipment. Operation with
non-approved
equipment or unshielded cables may result in
interference
to radio and TV reception. Any changes or modifications
not approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation
is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference
that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
A. WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting
devices, aseparation distance
of 20 cm or more should be maintained
between the antenna
of this device and persons during device
operation. To ensure compliance, operations at closer than this
distance
is not recommended. The antenna used for this transmitter
must not be co-located in conjunction with any other antenna or
transmitter.
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow
the safety instructions
on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5)
Do not use this apparatus near water.
6) Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers,
stoves,
or other apparatus (including amplifiers) that produce heat.
9)
IIL1'W'iTiEtid
Do not defeat the safety purpose of the polarized or grounding-type
plug. ApolariZed plug
has two blades with one wider than the other.
Agrounding-type plug
has two blades and athird grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug
does not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
10) Protect the
power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or <&
table specified by the manufacturer, or sold with the
apparatus. When acart is used, use caution when
moving the cart/apparatus combination
to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms
or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required
when the apparatus has been damaged in any way, such as
power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed
to rain or moisture, does not operate normally, or has been
dropped.
Accessories
N
N
~
o
a::
-
•
08 Screws
(XTN5+10FFJK)
02 Bases
(RYPX0389-KJ)
.0''''
o1 Auto speaker setup
microphone
(LOCBAB000125)
02 AC plug adaptors
(K2DA42E00001)
'4.,.,,;ti4 ;;4.
11
• .-.,.,
o1 Sheet of speaker
cable stickers
o~
o3 Speaker cables
[REEX0860A-L (blue)]
[REEX0868A-L (gray)]
[REEX0858-L (green)]
01
~
....
.,~,'.
'C)'"
o2 Remote control
batteries
o
Video cable
(K2KA2BA00001)
?,'O
o1 AM loop antenna
(N1DAAAA00002)
PPlease
check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(ProdUct
numbers correct as of December 2008. These may be subject to change.)
Only for U.S.A. and Puerto Rico:
.~ To order accessories, refer to "Accessory Purchases (United States and Puerto Rico)" on page 36.
For other areas: To order accessories, call the dealer from whom you made your purchase.
o1 Remote control 01FM indoor antenna 02 AC power supply cords 02 Speaker stands
(N20AYB000359) (RSA0007-M) ...... ,." ... iii,6l.Fjj (with cable)
(K2CB2CB00021) [RYPX0386-KLJ (white)]
[RYPX0386-KRJ (red»)
~ .. ~
o4iii ge.
IiIIilm
( K2C02CA00007)

Glossary
Decoder
Adecoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Dolby Digital
This is amethod of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can also
be 5.1-channel sound.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound that
can be heard above the noise
of the equipment and the highest level of
sound before distortion occurs.
Frame still and field still
Frames are the still pictures that go together to make amoving picture.
There are about 30 frames shown each second.
One frame is made up
of two fields. Aregular TV shows these fields one
after the other to create frames.
Astill is shown when you pause amoving picture. Aframe still is made up
of two alternating fields, so the picture may appear blurred, but overall
quality is high.
Afield still is
not blurred, but it has only half the information of aframe still
so picture quality is lower.
HDMI (High-Definition Multimedia Interface)
HDMI is anext-generation digital interface for consumer electronic
products. Unlike conventional connections, it transmits uncompressed
digital video and audio signals on asingle cable. This unit supports high-
definition video output
(nOp, 1080i, 1080p) from the HDMI AV OUT
terminal. To enjoy high-definition Video, ahigh-definition compatible TV is
required.
I/P/B
MPEG 2, the video compression standard adopted for use with
DVD-Video, codes frames using these 3picture types.
I: Intra coded picture
This picture
has the best quality and is the bestto use when adjusting
the picture.
P: Predictive coded picture
This picture is calculated based on past
1- or P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past and future
1- and
P-pictures so it has the lowest volume
of information.
JPEG (Joint Photographic Experts Group)
This is asystem used for compressing/decoding color still pictures. The
benefit of JPEG is less deterioration in picture quality considering the
degree of compression.
Linear PCM (pulse code modulation)
These are uncompressed digital signals, similar to those found on CDs.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to approximately
one tenth
of its size without any considerable loss of audio quality.
Playback control (PBC)
If aVideo CD has playback control, you can select scenes and
information with menus.
Progressive/Interlaced
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number
of scan lines. This
is called 480p.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your
TV must be compatible to enjoy progressive video.
Sampling frequency
Sampling is the process of converting the heights of sound wave (analog
signal) samples taken
at set periods into digits (digital encoding).
Sampling frequency is the number
of samples taken per second, so larger
numbers mean more faithful reproduction
of the original sound.
WMA
WMA is acompression format developed by Microsoft Corporation. It
achieves the same sound quality as MP3 with afile size that is smaller
than that
of MP3.
-
Selecting fine audio equipment such as the
unit you've just purchased is only the start of
your musical enjoyment. Now it's time to
consider how you can maximize the fun and
excitement your equipment offers. This
manufacturer and the Electronic Industries
Association's
Consumer Electronics Group
want you to get the most out of your
equipment by playing it
at asafe level. One
that lets the sound come through loud and
clear without annoying blaring
or distortion
-and, most importantly, without affecting
your sensitive hearing.
Listening caution
We recommend that you avoid prolonged
exposure to excessive noise.
Sound can be deceiving. Over time your
hearing "comfort level" adapts to higher
volumes
of sound. So what sounds "normal"
can actually be loud and harmful to your
hearing.
Guard againstthis by setting your equipment
at asafe level BEFORE your hearing adapts.
To establish asafe level:
•Start
your volume control at alow setting.
•Slowly increase the sound until you can
hear it comfortably and clearly, and without
distortion.
Once you have established acomfortable
sound level:
•Setthe dial and leave it there.
Taking aminute
to do this now will help to
prevent hearing
damage or loss in the future.
After all, we
want you listening for alifetime.

TABLE OF CONTENTS
Using the VIERA Link™ "HDAVI ControI™'' 24 Using the iPod 26
One touch play 24
Auto input switching 24
Power off link 24
Speaker control. 25
VIERA Link Control only with TV's remote control
(for "HDAVI Control 2or later") 25
Getting Started
IMPORTANT SAFETY INSTRUCTIONS 3
Accessories 3
Glossary 4
Quick Stan Guide
step 1 Assembling the front speakers 6
step 2 Positioning 7
step 3 Connections 8
Digital transmitter connection. . . .8
Speaker connections
.. 8
Audio and video connections
.. 9
Radio antenna connections. . . . . .10
step 4AC power supply cord connections. . . . .. 11
step 5Preparing the wireless system . . . . . . . . .. 11
step 6Preparing the remote control 11
step 7SMART SETUP 12
Playing Discs
Basic play 18
Using the main unit 18
Using the remote control. 19
Other modes of play 20
Playing CDs sequentially (CD Mode) 20
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Program and Random play 20
Other Operations
Reference
Speaker installation options 27
Changing the player settings 28
Discs that can be played 30
Maintenance 31
Product Service 31
Troubleshooting guide 32
Setting up the radio 13
Presetting stations automatically. . . . . . . . . . . . . . . . . . .. 13
Confirming the preset channels 13
Manual tuning ................................ .. 13
Selecting the playback source 15
Selecting the source from the START menu. . . . . . . . . .. 15
Selecting the source
by the remote control. . . . . . . . . . . . 15
Enjoying sound from all
speakers
and various sound
effects
Enjoying surround sound effects 16
Selecting sound mode 16
Whisper-mode Surround 16
Adjusting the speaker output level manually 17
Using navigation menus 21
Playing data discs. .............................. 21
Playing RAM and DVD-R/-RW (DVD-VR) discs 21
Using on-screen menus 22
Specifications 34
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) 36
Limited Warranty (ONLY FOR CANADA) 37
Control reference guide 38
N
N
a
~
a
Cl::
-

6-1- ---:
I I
I I
I I
I I
I I
DO
NOT
Caution
Do not stand on the base. Be cautious when children are near.
\oPress into the groove.
\e Tighten securely.
f) Insert the wire fully. ~~ .
'ii.F---, +: White'" '"
-: Blue f:: , 0"
Pushl C.\ -i '.
oInsert the wire fully.
1Ii.1::,---.... +: White
Blue
~'"
Pushl [~~\\'
i ..
eTighten securely.
Approx.
150mm
(5
29
132")
.. ~
Wall
Screw eye
(not included)
•i0 P",\,oo \he~b1e
~ between the ridges.
~\ Leave about 120 mm (4
23
132'1
Rear of the
speaker
~ ..... .. ~-
Make sure·you have all the Indicated components before starting assembly, setup, and oonnectlori .
•
Keep the screws ~t ()f reach of children to prev~t $Y8I1owlng:'" . '. . .
•
For optii:ltlaliwlill mount.. refill' td page' 27.:, .C
: ''?''',- ,@ ~r'~' .;;~ ". ~"f>'~',;;-{":";;::' [:" . ~,' ~ .
step 1 Assembling the front speakers
• You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
•Consult aqualified housing contractor concerning the appropriate
procedure when attaching to aconcrete wall or asurface that may not
have strong enough support. Improper attachment may result in
damage
to the wall or speakers.
String (not inclUded)
Thread from the wall to the speaker and tie tightly.
Preparation
• To prevent damage or scratches, lay down asoft cloth to assemble speakers.
•For assembly, use aPhillips-head screwdriver (not included).

•
Digital transmitter"
Center speaker
Put on arack or shelf.
Vibration caused by the
speaker can disrupt the
picture if it is placed directly
on the TV.
Surround speakers
To allow for proper ventilation and to maintain
good airflow around the main unit, position it with
at least 5 cm (2") of space on all sides.
•
DO
NOT
Notes on speaker use
•Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
• You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
•Reduce the volume in the following cases to avoid damage:
-When playing distorted sound.
-When the speakers are reverberating due to arecord player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
-When adjusting the sound quality.
-When turning the unit on or off.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
e.g. Center speaker
The wireless system will automatically seek aclear channel if any of these
other devices interfere with its communication. When this happens, the
wireless link indicator (" ~ ") flashes on the main unit, and there is abrief
interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater system.
Ifthe interference persists, try moving the other devices to another location
outside the range of the wireless system or move the wireless system
nearer to the main unit.
"Do not use the wireless system or the digital
transmitter in ametal cabinet or bookshelf.
Front
speakers
Caution
•The main unit and supplied speakers are to be
used only as indicated in this setup. Failure to
do so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change
in performance .
•Do not attempt to attach these speakers to walls
using methods other than those described in
this manual.
Wireless system"
• Place the wireless system within
approximately 15 m(47 ft) from the
main unit, and in ahorizontal position
with the top panel faced upward.
• To allow for proper ventilation and to
maintain good airflow around the
wireless system, position it with at least
5 em (2") of space on all sides.
Subwoofer
Place to the right or left
of the TV, on the floor or
asturdy shelf so that it
will not cause vibration.
Leave about 30 cm
(11' 3115") from the TV.
-
step 2 Positioning
If irregular coloring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetizing function of the TV should correct the problem. If it
persists, move the speakers further away from the TV.
How you set up your speakers can affect the bass and the sound field.
Note the following points:
• Place speakers on flat secure bases.
•Placing speakers too close to floors, walls, and comers can result in excessive bass. Cover walls and windows with thick curtains.
mm
Keep your speakers at least 10 mm ('3hi') away from the system for proper ventilation.
Setup example
Place the front, center, and surround speakers at approximately the same distance from the seating position. Using "Auto speaker setup" (Q 12) is a
convenient way to get the ideal surround sound from your speakers when you are unable to place them. The angles in the diagram are approximate.

~\~
Push!
•Be careful not to cross
(short circuit) or reverse
the polarity
of the
speaker wires as doing
so may damage the
speakers.
DO '~~
NOT~~
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
+: White
-: Blue
e.g. Surround speaker (L)
Speaker cable
sticker (included)
~-e:::
-'#:1
Surround speaker (R)
SPEAKERS
ENCEI~IES
~.·",;II;:'1!lSi
I I
GJGJ
!I;IJ~~
f:;~I~' .,.~m
Surround selector
The surround selector switch must
be set in the center position.
Main
unit
GREEN
CENTER
Main unit
(§) \2J @ CD
@W
SU8INGOFE~ CENTER FRCNT
Wireless system
RED WHITE BLUE
FRONT FRONT SURROUND
(R) (L) (L)
JJ" JJ" JJ" .)J" JJ"
i----
1
-----I----!----I------
step 3 Connections
PURPLE
SUBWOOFER
Setup example
Pay attention to the type of speaker and the connector color when you place the speakers.
Connect to the terminals of the same color.
Use of the speaker cable stickers is convenient when making cable connections.
II Digital transmitter connection
BSpeaker connections
Tum off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are complete.

Main unit
Features
This is the preferred connection for best sound and
true surround sound.
This unit can decode the surround signals received
from your
TV, cable or satellite STB. Refer to the
operating instructions for the
TV, cable or satellite STB
for the settings necessary
to output its audio from the
digital audio output to your hometheater system. Only
Dolby Digital and PCM can be played with this
connection.
•After making this connection, make settings to suit
the type
of audio from your digital equipment (Q 15).
This connection provides amuch purer picture than
the VIDEO OUT terminal.
•After making this connection, select "DARKER" from
the "BLACK LEVEL" in the VIDEO menu
(Q 28).
To
enjoy progressive video
•Connect to aprogressive output compatible TV.
-Set "VIDEO OUT (liP)" in VIDEO menu to
"PROGRESSIVE" and then follow the instructions
on the menu screen
(Q 28).
This connection provides the best picture quality.
•Set "VIDEO PRIORITY" to "ON"
(Q 29, HDMI
menu).
•Set "VIDEO FORMAT" in Menu 4(HOM!)
(Q 23).
VIERA Link "HDAVI Control"
If your Panasonic TV is VIERA Link compatible, you
can operate your
TV synchronizing with home theater
operations or vice versa
(Q 24, Using the VIERA
Link™"HDAVI ControI™").
•Makethe audioconnection
(Q above) when you use
VIERA Link "HDAVI Control" function.
Set
top box (STB) or VCR
(not included)
OPTICAL
IN
HDMI
y~
P
.,--1)'
(0)
p, -.
@
COMPCNE.NT
VIDEO OUT
8
OPTICAL IN
ICOMPONENT VIDEOI
Main unit terminal
Cable required
(not included)
Video cables
•Do not bend sharply when
connecting.
Optical digital audio cable
.Qi;)J--L,":::CQJ:P
HOMI cable
~~
mmI
•Non-HDMI-compliant cables
cannot be utilized.
•It is recommended that you use
Panasonic's HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m/4.9 ft),
RP-CDHG30 (3.0 m/9.8 ft),
RP-CDHG50 (5.0 m/16.4 ft), etc.
Cable required
(not included)
tJ
Ho:::Jml
AVIN
8
OPTICAL OUT
TV terminal
)'k'@)RFIN
To your cable TV /I ~ RF OUT
service orTV antenna
RF cable (not included)
---I
All Panasonic TVs that
have 480p input
connectors are
compatible. Consult the
manufacturer
if you have
another brand
of TV.
~ [~~j~~:) I tf'~
-';~[!_c~~,el I; II';~:'
TV (notinciuded) '" .~ ·,mH.C1
Video cable
Referto the operating instructions for the
TV, cable (included)
or satellite STB, or VCR for the settings necessary
to output itsaudio from the AUDIO OUT terminal to
your home theater system.
mmI
• Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not
be displayed properly.
•Only one video connection is required. Choose one
of the video connections above depending on your TV.
•
If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV
output should then be connected to the AUX or OPTICAL IN terminal of the main unit.
II Audio and video connections
Basic setup example

Main unit
Push!
@ Attach the cover.
Clamp with pliers.
@ Install the coaxial cable.
Clamp the cable conductor. and
wind it around so that it does not
contact anything else.
IAM loop antennaI
(included)
Stand the antenna up on its base.
Place the antenna where reception is best.
AM outdoor antenna
[Using a vinyl wire (not included»
Run apiece of vinyl wire horizontally across a
window or other convenient location.
® Carefully pull the tabs apart
to remove the cover.
10iTi"m (
13
/32")
---<P Ib ck
10 mm ('3hi') ee a
CD Remove a piece of the outer
vinyl insulator.
Main unit
step 3 Connections (continued)
FM outdoor antenna
[Using aTV antenna (not included)]
The antenna should be installed by a
competent technician.
-r
!
1'~Omt012m
(16ftt039ft)
.Il:: I;~;::~"bl'~ ~:::"::~~~~~ ~" 0\."0:0
li 1i1. .. ·WCi\Ie6!.fij
Antenna plug (not included)
•Rework your outdoor antenna's 75 0coaxial cable as follows.
Use outdoor antenna if FM/AM radio reception is poor.
•Disconnect the antenna when the unit is not in use.
•Do not use the outdoor antenna during an electrical storm.
IFM indoor antenna I
(included)
Affix this end of the antenna where
reception is best.
( t1 Red I NJANT
[I·f:l- Adh.,;.. ~ ¢ Why I !J(~
"PO -.. 8~+------"
1
~ ~Ol~
_
________ -4--'\;1/1 mANTeNO
•FMANT
'-- !_75_rJ_
l
...J Main unit
•Keep loose antenna cables away from other wires and cables.
II Radio antenna connections

Main unit
VOLT ADJ
r---Iilh
nO-l27V 22C-240V
Aim at the remote control signal sensor (q 39), avoiding obstacles, at a
maximum range of 7 m (23 ft) directly in front of the unit.
Do not:
•mix old and new batteries.
•use different types of batteries at the same time.
•take apart or short circuit.
•attempt to recharge alkaline or manganese batteries.
•use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries ifthe remote control is not going to be used for a
long period of time. Store in acool, dark place.
mm
The included AC power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or wireless system.
Press [POWER ... I," <9] on the wireless system.
Unit on/off button [POWER .. I, I ~]
Use this button to turn the wireless system on and off.
.. I: The wireless system is on.
I6: The wireless system is off.
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green: The wireless system is on and the wireless link is activated.
(" ~. is also displayed on the main unit's display.)
•If the AC plug does not fit
your household AC outlet
Use the AC plug adaptor
(induded).
Ifit still does not fit, contact an electrical
parts distributor for assistance.
Before connecting the AC power
supply cord
Set the voltage.
Use aflat-head screwdriver to move the
voltage selector to the appropriate position
for the area in which this system is used.
'4.11";'"-*4 '3g.
i• IL
i'.Mi,j,I+i,Fi·n
,
,
:_. ~ ~ ~ ~ J
step 4 AC power supply cord connections
oReplace the cover.
eInsert so the poles (+ and -) match those in the remote control.
step 6 Preparing the remote control
To
household
AC outlet
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Wireless system
Wireless system
•Use alkaline or manganese batteries.
•Do not heat or expose to flame.
•Do not leave the battery(ies) in an automobile exposed to direct
sunlight for along period of time with doors and windows closed.
Turn on the wireless system after all connections are complete.
step 5 Preparing the wireless system
Conserving power
The main unit and the wireless system consume asmall amount of
power when they are turned off (ImIIm'+"6!.!iI main unit: approx.
0.1 W, wireless system: approx. 0.2 W, mmmain unit: approx. 0.2 W,
wireless system: approx. 0.3 W). To save power when they are not to be
used for along time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main
unit.

mmI
Auto speaker setup can be activated through Smart setup only.
Keep as quiet as possible during the Auto speaker setup. Loud
voices, air-conditioning noise,
or excessive wind may lead to incorrect
settings. The speakers output loud test signals during setup.
• Adjusting the speaker output levelautomatically:
Auto speakersetup
The speaker level settings can be optimized to accommodate your
room's listening conditions so that you can enjoy the ideal surround
sound experience.
ePlace the
Auto speaker setup microphone at actual seating position.
(At
ear level when seated.)
e The test signal is output from each speaker.
mmI
elf this unit is connected to a"HDAVI Control 3 or later" compatible TV
via HOMIcable, the menu language and TV aspect information will be
retrieved via VI ERA Link.
elf this unit is connected to a"HDAVI Control 2" compatible TV via
HDMI cable, the menu language information will be retrieved via
VIERA Link.
eSettings in
the Smart setup can also be changed in the player settings
[e.g. language,
TV aspect, speaker level and TV audio (Q 28)).
-Language
Select the language used on menu screen.
-TV aspect
Select the aspect to suit your TV.
-Speaker check
Listen to speaker output to confirm speaker connections.
-Auto speaker setup
Adjust the speaker output level automatically. (Q below)
-Speaker output
Make surround sound setting for speaker output.
-TV audio
Select the audio input connection from your TV .
For
AUX connection (Q 9): Select "AUX·.
For
OPTICAL IN connection (Q 9): Select "DIGITAL IN".
This will be the
TV audio setting for VIERA Link "HDAVI Control". (Q 24)
A,T
OK
Would you like 10 !\tart smart
sr.lup7
SMART SETUP ~
,SINtt .. t
Follow the messag-es arter--
make the settings.
(Q right, Smart setup settings)
Turn on the unif---- -----
eWhen the Smart setup screen appears
automatically, skip step 2 and 3.
, i ;tim,,;. ~)
~ ~ 1% zllll~t~ \ '
-. .
Preparation
Turn on your TV and select the appropriate
video
input mode (e.g. VIDEO 1, AV 1, HDMI,
etc.) to suitthe connections
to this unit.
e
To change your TV's video input mode, refer
to its operating instructions.
eThis remote control can perform
some basic
TV operations (Q 38).
.--'
<!>~ ~ __ '~tl;r;w
. i0@ ,.'1)
step 7SMART SETUP
The Smartsetup screen assists you in making necessary
settings.

Setting up the radio
"
Ie
~
~
When astereo FM broadcast is being
received, "ST" lights in the display.
Altematively, press [v, 1\].
eMain unit:
Press [-TUNE MODE] to select "PRESET"
on the display, and then press
[v TUNE 1\] to select the channel.
eMain unit:
Press [SELECTOR].
Select the channel.
e To select a2-digit number
e.g. 12: [~10] Q[1] Q[2]
Confirming the preset channels
eThe FM/AM setting is also shown on the TV display.
FUNCTIONS
GiiiL'"'+- RADIO
.... ~ SEARCH
OK
MENU
When "FM" is selected
Press and hold [PLAY MODE]
(main unit: [-FM MODE]) to
display "MONO".
SELECTOR v TUNE APress and hold the button again to cancel the mode.
eThe mode is also canceled when you change the frequency.
Presetting stations automatically
eMain unit:
Press and hold [MEMORY).
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
Select "FM" or "AM".
eMain unit:
Press [SELECTOR).
·sefec'fihefreque·n'cy:·············
eMain unit:
Press [-TUNE MODE] to select"MANUAL"
on the display, and then press
[v TUNE 1\] to select the frequency.
e To start automatic tuning, press and hold
[......, ~~] (main unit: [v TUNE 1\]) until
the frequency starts scrolling. Tuning
stops when astation is found.
(Continued on next page)
Manual tuning
When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2 ......... BP 1
1111 Til
nUIU
ell/I
I I I
Each time you press~ihebutto;;:"""~""
LOWEST (factory preset):
To begin auto preset with the lowest
frequency.
CURRENT:
To begin auto preset with the current
frequency."
" To change the frequency, referto "Manual
tuning" (Q right).
ffelease'ihe'6uttorlwhEln'~""'~~'~-"
"FM AUTO" or "AM AUTO' is displayed.
Up to 30 stations can be set in each band, FM and AM.
Seleci,iFM;;"or'i'AM"~"""""""
eMain unit:
Press [SELECTOR).
e"SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
e"ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (Q 14). -

Setting up the radio (continued)
Il
Ie
FM frequency step
Main unit only
The step is factory-set to 0.2-MHz, but you can change it to receive
broadcasts allocated in
0, 1-MHz steps. You may need to change this
setting
if the tuner seems to skip over the correct frequency for stations in
your area.
CD Press [SELECTOR] to select "FM".
@ Press and hold [SELECTOR].
After afew seconds the display changes
to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
e.g. 87.9 (Factory preset)
........ 87.5
To return to the original step, repeat steps CD and @.
miD
After changing the setting, previously preset frequencies will be cleared.
Preset them again,
Alternatively, press
[v, A). and then press [OK].
Main unit:
CD While listening to the radio broadcast
Press [MEMORY] twice.
@While achannel number is flashing on the display
Press [v TUNE A], and then press [MEMORY].
Astation previously stored is overwritten when another station is stored
in
the same channel preset.
JIiIfj
"" ," ,j
:', ' __ ,Ui;l;;;,r" """.
Up to 30 stations can be set in each band, FM and AM.
CD While listening to the radio broadcast
Press [OK].
@While the frequency is flashing on the display
Press the numbered buttons to select achannel.
•
To select a2-digit number
eg, 12: [~10) ~ (1) ~ (2)
OK
Numbered
buttons
N
N
g
a::
-

Selecting the playback source
iPod (Q 26)
DVD/CD
(Q 12)
Ea'ChTimeyoupress-ihe'6ution:"~"--~--~
FM (Q 13)
AM (Q 13)
AUX": For audio input through the AUX
terminal.
D-IN': For audio input through the
OPTICAL IN terminal.
(Q below)
""(TV)" will appear beside "AUX"
or "D-IN",
indicating the TV audio setting for VIERA
Link "HDAVI Control" (Q 24).
Selecting the source by the remote control
PCM FIX mode
PCM ON: Selectwhen receiving only PCM signals.
pCM OFF: Select when receiving Dolby Digital and PCM signals.
(When receiving true 5.1-channel surround sound, select "PCM OFF".)
mIll
•Audio that is input through the OPTICAL IN terminal is not output from
the HDMI terminal.
•Underlined items in the above paragraph are factory settings.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP", MAIN+SAp' (stereo audio)
""SAP" =Secondary Audio Program
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
pRe OFF: The full dynamic range of the signal is reproduced.
Select to suit the type
of audio from the OPTICAL IN terminal on the main
unit.
While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or "PCM FIX".
2While the selected mode is displayed
Press [.l. ~] to make the setting.
Press [SELECTOR) on the main unit to select source from the main unit.
(Q 39)
mIll
Confirm the audio connection to the AUX or OPTICAL IN terminal on the
main unitwhen you select the corresponding sources
(Q 9). Reduce the
volume on the TV to its minimum and then balance the TV volume with
the volume setting on the main unit. Refer also to the operating
instructions for your TV to balance the sound.
Home theater
.t.,'f'
OK
START
=e...-.- RADIO, EXT-IN
tJJ 4
OVDICD
Make the setting.
Select an item.
• To exit, press [START].
Show~th-e~SfART··menu.---·~·~·
This unit automatically turns on.
(The
TV also turns on when using VIERA
Link "HDAVI Control". Thisworks only when
in "DVD/CD"
or "IPOD" mode without any
disc/device being loaded/connected.)
e.g.
DVD
j"""-~'-J";'
iPod
SETUP
When "Input select" is selected
You can select adesired source from the menu.
•DVD/CD
(Q 12), FM (Q 13), AM (Q 13), AUX" (Q right),
DIGITAL
IN" (Q right), iPed (Q 26)
""(TV)" will appear beside" AUX" or "DIGITAL IN", indicating the TV
audio setting for VIERA Link "HDAVI Control" (Q 24).
When a disc is loaded, you can also access playback or menus from the
START menu.
e.g.lovo-vl
Selecting the source from the START menu
! OYD~;CD~~~§!5~E~!- Playback/menu access
You can select desired source or access playback/menus by using the
START menu.
When the on-screen control panel appears
e.g.lovo-vl (when "Playback Disc" is selected from the START menu)
You can operate the playback with the indicated controls. -

Enjoying sound from all speakers and various
soundeffects
Selecta sound modi.""---·-·-·----
Each time you press the button:
EQ: Equalizer
SUBW LVL: Subwoofer Level
C.FOCUS: Center Focus
·_~~ N~·_~._ .. _~ .. _~ __ ~ ._. __ ,~_._,_~ .. ~_
Make settings.
Refer to the following for setting details of
each sound effect.
Subwoofer level
You can adjust the amount of bass. The unit automatically
selects the most suitable setting according to the type of
playback source.
SUB W1 ~ SUB W2 ~ SUB W3 ~ SUB W4
t t
•The setting you make is retained and recalled every time you
play the same type of source.
Equalizer
You can select sound quality settings.
Each time you press [...,
~l:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Selecting sound mode
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
.PLII MOVIE
.PLII MUSIC
.S.SRND
.t.,",<IlII,~
OK
~
l
-, -+ - VOL
\~l '
•The following sound effects may not be available or may have no effect
with some sources, or when headphones are used
(~ 39).
•
You may experience areduction in sound quality when these sound
effects are used with some sources.
If this occurs, turn the sound effects
off.
Enjoying surround sound effects
su-rfROU NDOUTpUTTndicato7Qn'iiieiiiain
unit will light up when there is surround
sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded.
Speaker output varies depending
on the
source.
MULTI-eH:
You can enjoy sound from the front
speakers, as well as the surround speakers
even when playing a2-channel sound or
non-surround sound.
MANUAL:
(~ below)
Select other sur.:oundmodes:----
Each time you press [..., ~]:
PLIIMOVIE'
Suitable for movie software, or softwares
recorded
in Dolby Surround.
PLII MUSIC'
Adds 5.1-channel effects to stereo
sources.
S.SRND
You can enjoy sound from all speakers
with stereo sources. (Surround output will
be in mono.)
STEREO
Sound will only be output to the front
speakers and the subwoofer from any
source.
Center Focus
(Effective when playing audio containing center channel
sound
or when "IXIPLll" lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the
TV.
C.FOCUS ON------C.FOCUS OFF
--- .. _----
Whisper-mode Surround
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
bJ
Each time you press the button:
WHISPER-MODE SRD
ON
t
WHISPER-MODE SRD OFF
N
~ • "[][]PLII" lights in the.main unit's display when there is effect.
~
o
a:
-

Adjusting the speaker output level manually
Preparation
•To display the picture. tum on the TV and select the appropriate video
input mode.
•Press
[+. -VOL) to adjust the volume to normal listening level.
•Select "TEST TONE" from "SPEAKER SETIINGS" in AUDIO menu
(0) 29).
r:.XIT SETUP
Test tone will be output to each channel in
the following order.
LEFT. CENTER, RIGHT.
SURROUND RIGHT. SURROUND LEFT
AdJust'thespeakeriev"effor each"~'~""
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
-6 dB to +6 dB (Factory preset: 0dB)
•
To exit the screen. press [SETUP).
l!l
(Effective when playing 5.1-channel sound or when "CCPLII" lights,)
<D Press and hold [-CH SELECT] to select the speaker.
While the speaker channel is displayed. press [-GH SELECT],
L_ C- R-. RS-. L5- SW
t I
•You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "CCPLII"
is not lit.
•"S" appears on the main unit's display when you have selected
"S.SRND" (0) 16, Enjoying surround sound effects). In this case.
you can adjust both surround speaker levels at the same time using
[A. ~l,
S: -6 dB to +6 dB
®Press [A] (increase) or [~] (decrease) to adjust the speakerlevel
for each speaker.
C. RS. LS. SW: -6 dB to +6 dB
(L.
R: Only the balance is adjustable.)
To adjust the balance
of the front speakers, while "L" or "R" is selected,
press [ ..... ~).
-

Basic play
If you are experiencing problems, refer to troubleshooting (0) 32 to 33)
Preparation
To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HOM!. etc.) to suit the connections to this unit.
Using the main unit
1 [POWER<.!>~
Turn on the unit. 2
~LECTOR
Select "DVD/CD".
3I ~ OPEN/CLOSE b
Open all the disc trays.
• To select adesired tray (0) below, Selecting the desired tray).
•Press
[~OPEN/CLOSEl again to close all the disc trays.
Start play.
•Turn [-, +VOLUME) to
adjust the volume.
~Label
~"'ci"9"P
4Load the disc.
•Load double-sided discs so the
label for the side you wantto play is
facing up.
•Press [EXCHANGE) to load discs
one
by one.
•For DVD-RAM, remove the disc
from its cartridge before use.
•Do not:
-Load more than one disc per tray.
-Push or pull out the tray by hand.
Pull open
CD 0®@
5DISC SELECTOR ®0
Tl
'NEGh
... i... ~/~
Press to select a disc directly.
• You can also select the disc using the remote
control (0)
19, Selecting adisc).
Press to skip.
Press and hold to:
-search during play
-start slow-motion play during pause
•Press
[~l (Play) to start normal play.
~CHANGE
•All trays are opened (except the tray where the disc
is playing).
•Press [EXCHANGE] to
dose the top tray.
Press again until all the trays are
dosed
•Press [~OPEN/CLOSEl to close all the open trays.
.During play,
o®@®
5DISC SELECTOR
CD
~ OPEN/CLOSEb
,Press [~OPEN/CLOSEI again to close the tray_
N
N
a
~ ..
ii1 •DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit's motor and your TV screen, press [_j (Stop) when you are finished with the menus.
_ • Total title number may not be displayed properly on
+RI+RW.

Using the remote control
-
DISC CHANGE
I OVD-VA II OVD-V II WMA II MP31
Time display
~ Information display
(e.g. I
OYD-VR IProgram
number)
IOVD-vRI
Press the button to show aplay list
(¢ 21).
lOYD-VAl
Press the button to show the
programs
(Q 21).
o1 Invl};\III}J!i)',i06#+*W']
02 CD
03 DYD·YR
04 UNCHECKED =-l
OS NO DISC
I
Empty tray Not yet read
I OVD-VR II OVD-V II vco I@[]
e.g. To select 12:
[~10] Q (1) Q[2]
I vco Iwith playback control
Press
[. STOP) tocancel the PBC
function, and then press the
numbered buttons.
Disc information screen is
displayed.
-
To exit the screen, press [DISC).
eg·loYD-vl
4, "f,~,~,"'Il,Il~
OK
RETURN
+,- VOL
-Up to 5steps.
-Press
[~ PLAY] to start normal
play.
-I vco ISlow-motion: Forward
direction only.
-Press
[~ PLAY) to restart play.
I
OVD-VA II OVO-V II vco I
-I OVD-VA II vco IForward direction
only.
The position is memorized while
"RESUME STOP"
is on the
screen.
-Press
[~ PLAY] to resume.
-Press [. STOP) again to clear
the position.
(Remote control only)
The main unit automatically turns
on and starts playing the
disc in
the tray.
1
Numbered
buttons
MENU, PLAY LIST
FLDISPLAY
TOP MENU,
DIRECT NAVIGATOR

Other modes of play
Aft '.
SELECT TITLE
~:-p
SElECT TITLE TITlE CHAPTER
.-
,iT; E <-
i"!F~: .!
1,~ u:: "
- "*" represents selected. To deselect. press
[OK)
~~~~_. ~~ ~ "_._
Start play.
To select all the items
Press [.A., 'f) to select "ALL" and press [OK).
To clear the selected program
1Press [~) and then press [.A., 'f] to select the program.
2Press [CANCEL).
To clear the whole program
Press [~) several times to select "CLEAR ALL", and then press [OK).
The whole program is also cleared when the disc tray is opened, the unit
is turned offor another source is selected.
-Repeat this step to program other items.
-
To return to the previous menu, press
[RETURN).
-=-:----:'~-----_. __ •.. _._-"_ ......_ .. _.
Start play.
•All-Disc random (when CD Mode is on)
I veo I @QJ You can playback all the items on all the discs in random order.
Press (~ PLAY]. eg @Q]
•1-Disc random
I vco I @Q] You can playback all the items on adisc in the selected tray in
random order.
IOVD-vllWMAl1 MP311 JPEGI You can playback selected item(s) on adisc in
the selected tray in random order.
(Only Wherlthe
clTschasgro'ups"ormuliiple--
titles.)
Select agroup ortitle.
e.g. I OVD-V I
•All-Disc program (when CD Mode is on)
I vco I @Q] You can program all the items on all the discs.
(j) Press (.A., 'f], and then press (OK] to select the disc.
® Press (.A., 'f], and then press (OK] to select the track.
@ Repeat step (j) and ® to program other items.
- To return to the previous menu, press [RETURN].
@ Press (~ PLAY].
•1·Disc program
I OYD-V II vco I @Q] I WMA II MP311 JPEG I You can program all the items on a
disc in the selected tray.
G
--
t' • ~
' ... -'
&,'f,"',~
( OK
""il::,",-U' ·(3'.J!:i~ RETURN
~..l...CANCEL
I
Selectan'ltem to be repeated.
e.g. lOYD-vi
~ TITLE -> ~ CHAP. -> ~ OFF
tI
To cancel, select "OFF".
Program and Random play
ovo-v veo co WMA MP3 JPEG
This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
Show the"repeat mode.----".-~·~--
Playing CDs sequentially (CD Mode)
vco co WMA MP3
- If all loaded discs are DVDs, CD Mode does notwork.
-Video CD playback control is disabled.
-You cannot
tum CD Mode on or offduring program or random mode.
-If you want to playa DVD, press and hold [-CD MODE) again while
stopped to cancel CD Mode. (CD Mode is also canceled when you
switch the unit to standby, select another source, or when the disc tray
is opened.)
-CD MODE ~--i'
Items shown differ depending on the type of disc and playback mode.
To enjoy program or random play with:
- 1 disc :ensure CD Mode (0) above) is off
-all discs :ensure CD Mode is on
Preparation
IRepeat play
This feature allows you to play all loaded CDs sequentially. Select an
applicable disc before playing (0) 19, Selecting adisc).
Sehlcttheplay-mode:--- -----.,-.--
Program and random playback screens appear
sequentially.
Program ,Random
~ " L Exit program and random screens .-J
g -!oVD-vRI Select "DATA" in "DVD-VRII)ATA::~-29·,-oiHERS~~~~~_·
a:: play WMA, MP3, JPEG contents.
-I OYD-V ISome items cannot be played even if you have programmed
_them.