Panasonic SA-HT822VP User manual

final.html
Table Of Contents
COVER
1 Powering Up of the Main
Unit
1.1 Checking Player with
Active Subwoofer
1.2 Using of Power Jig
2 Before Repair and
Adjustment (Using Active
Subwoofer Unit)
3 Protection Circuitry
4 Safety Precautions
4.1 General Guidelines
4.1.1 Leakage Current Cold
Check
4.1.2 Leakage Current Hot
Check (See Figure 1)
4.1.3 Caution for fuse
replacement
5 Handling the Lead-free
Solder
5.1 About lead free solder
(PbF)
6 Prevention of Electro
Static Discharge (ESD) to
Electrostatically Sensitive (ES)
Devices
7 Accessories
8 Precaution of Laser Diode
9 Optical Pickup Self-
Diagnosis and Replacement
Procedure (DVD Section)
9.1 Self-diagnosis
9.2 Cautions to Be Taken
During Replacement of Optical
Pickup and Spindle Motor
Assembly
9.2.1 Cautions to be taken
during replacement of optical
pickup
10 Self-Diagnosis Function
and Service Mode
10.1 Self-Diagnosis Function
(VTR Section)
10.1.1 Sef-Diagnosis Display
10.1.2 Service Mode
10.1.3 Service Mode Display
10.1.4 Self-Diagnosis
History Memory Function
10.1.5 Self-Diagnosis
History Memory
10.2 Self-Diagnosis Function
(DVD Section)
10.2.1 Self-Diagnosis
Display
10.2.2 Error Code Display
10.3 Self-Diagnosis Function
and Service Mode
10.4 Mode Table
10.5 Servo Process
Flowchart
10.6 Servo Process Display
Mode
Service Manual
TOP NEXT
ORDER NO. MD0403140C1
A6
DVD/VHS Home Theater Sound System
●SA-HT822VP
Colour
(S)... Silver Type
Specifications
AMPLIFIER SECTION
RMS output power, 10% total harmonic distortion
1 kHz FL/FR 50 W per channel 6Ω
1 kHz Center 150 W per channel 6Ω
1 kHz SL/SR 50 W per channel 6Ω
100 Hz Subwoofer 200 W per channel 4Ω
Total RMS Dolby Digital mode power 550 W
FTC output power, 1% total harmonic distortion
120 Hz - 20 kHz FL/FR 28 W per channel 6Ω
120 Hz - 20 kHz Center 100 W per channel 6Ω
120 Hz - 20 kHz SL/SR 28 W per channel 6Ω
45 Hz - 120 kHz Subwoofer 128 W per channel 4Ω
Total FTC power in Dolby Digital mode (Band 1% THD) 340 W
Input sensitivity
AUX 250 mV
Input impedance 47 kΩ
DISC SECTION
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/PVAccel.html (1 of 4)9/3/2004 9:42:47 AM

final.html
10.7 ADSC internal RAM
display
10.8 Lock Function
10.8.1 Setting
10.8.2 Exiting Lock Function
10.9 Cautions To Be Taken
During Servicing
10.9.1 Recovery Process
after Repair of DVD Player
10.9.2 DVD Player
Firmware Version Upgrade
Process
10.10 Operation after
Completion of Repair
10.10.1 Steps
10.10.2 Precaution Note
(Important)
11 CHECKING POINTS
FOR SYS COM TIMER MY-
COM (IC6001) (VIDEO)
11.1 Points to check when
replacing
11.2 Initial setting when
replacing My-com.
11.3 Initial figure ( # )
setting procedure
12 Adjustment Procedure
(DVD Section)
12.1 Required Tools and
Equipment
12.2 Necessity of
Adjustment
12.2.1 Necessity of Optical
Adjustment
12.2.2 Necessity of Electrical
Adjustment
12.3 Storing and Handling
Test Discs
12.4 Optical Adjustment
(Optical Pickup Tilt
Adjustment)
12.4.1 Optical Adjustment
(Optical Pickup Tilt
Adjustment)
12.4.2 Tips
12.4.3 Check After
Adjustment
12.4.4 Procedure for Screw
Lock
13 Operation Procedure
14 Disc information
15 About HighMAT
15.1 What is HighMAT?
15.2 Why use HighMAT?
15.3 The advantages of using
HighMAT
15.4 Outline of the
HighMAT standard
16 Assembling and
Disassembling
16.1 Disassembly flow chart
16.2 P.C.B. Positions
16.3 Disassembly of Top
Cabinet
Discs played [8 cm (3”) or 12 cm (5”)]
1. DVD-RAM (DVD-VR formatted discs, JPEG formatted discs)
2. DVD-Audio
3. DVD-Video
4. DVD-R (DVD-Video formatted discs)
5. CD-Audio (CD-DA)
6. Video CD
7. SVCD (Conforming to IEC62107)
8. CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted discs)
9. MP3/WMA
❍Maximum number of tracks and groups recognizable:
999 tracks and 99 groups
❍Compatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
10. JPEG
❍Exif Ver 2.1 JPEG Baseline files
❍Maximum number of pictures and groups recognizable:
4000 pictures and 400 groups
❍Picture resolution: between 320x240 and 6144x4096 pixels
(sub sampling is 4:2:2 or 4:2:0)
11. HighMAT Level 2 (Audio and Image)
Video
Signal system NTSC
Output level Composite video; 1 Vp-p (75Ω)
S-video; 1 Vp-p (Y), 0.286 Vp-p (C) (75Ω)
Component video; 1 Vp-p (Y) (75Ω)
0.7 Vp-p (PB/CB, PR/CR) (75Ω)
Audio
Sampling frequency
CD 44.1 kHz
MP3 32 kHz, 44.1 kHz, 48 kHz
DVD-Linear 48 kHz, 96 kHz
DVD-Audio 192 kHz
Decoding 16/20/24 bit linear
Pick up
Beam Source Semiconductor Laser
Wavelength
CD/VCD 785 nm
DVD 662 nm
Number of channels 5.1 ch (FL, FR, SL, SR, C, SW)
Frequency response 20 Hz - 20 kHz (+1, -2 dB)
VHS SECTION
Video recording system 2 rotary heads, helical scanning system
Video heads 4 heads
Audio heads 2 heads
Tape speed SP; 33.35 mm/s, EP; 11.12 mm/s
Tape format VHS tape
Recording/playback time SP; 120 min. with NV-T120
EP; 360 min. with NV-T120
FF/REW time Approx. 54 s. with NV-T120 (FF/REW)
Approx. 36 s. with NV-T120 (JET REW)
VIDEO
Television system EIA; Standard (525 lines, 60 fields), NTSC color signal
Modulation system Luminance; FM azimuth recording
Color signal; converted subcarrier phase shift recording
Input level VIDEO IN; 1 Vp-p, 75Ω
Output level VIDEO OUT; 1 Vp-p, 75Ω
Antenna receive input VHF 2-13 CH, 75Ω
UHF 14-69 CH, 75Ω
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/PVAccel.html (2 of 4)9/3/2004 9:42:47 AM

final.html
16.4 Disassembly of Front
Panel
16.5 Disassembly of VTR
Mecha Unit
16.6 Disassembly of DVD
Mecha Unit
16.7 Disassembly of DSP,
Power, AC Inlet and Main P.C.
B.
16.8 Disassembly of Panel A
P.C.B., Panel B P.C.B. and
5DVD Led P.C.B.
16.9 Procedure for removing
CR16 mechanism (Precaution)
16.10 CR16 mechanism
disassembly procedure
16.10.1 Gear for servicing
information
16.10.2 Replacement of
traverse deck
16.10.3 Replacement of
optical pickup unit
16.10.4 Disassembly of
Traverse Motor (Unit) and
Spindle Motor (Unit)
16.10.5 Replacement for the
disc tray
16.10.6 Replacement for the
traverse deck
16.10.7 Disassembly for
loading unit
16.11 CR16 MECHANISM
ASSEMBLY PROCEDURE
16.12 Disassembly of
traverse mechanism
16.13 Removing the Cassette
Tape Manually
16.13.1 Removal by
Compulsory Loading
16.13.2 Removal by Use of
Battery to Rotate Loading
Motor
16.13.3 Removal of Mecha
Unit then take out Cassette
Tape
17 Procedure for checking of
the major P.C.B.
17.1 Checking the DVD
Module P.C.B., DSP P.C.B.,
Power P.C.B., CD Loading P.C.
B., Panel A P.C.B., Panel B P.
C.B. and 5DVD Led P.C.B.
17.2 Checking Main P.C.B.
& AC Inlet P.C.B.
18 Waveform Chart
18.1 Preparation Items
18.1.1 Procedures
19 Illustration of IC ’ s,
Transistors and Diodes
20 Block Diagram
20.1 DVD Module Block
20.2 Main Block
21 Notes of Schematic
Diagram
CATV 5A and A-5-EEE CH, 75Ω
AUDIO
Input level AUDIO IN (PHONO); -10 dBV, 47 kΩ
Output level AUDIO OUT (PHONO); -8 dBV, 1 kΩ
Audio track 1 track (normal-mono only),
2 channels (Hi-Fi sound stereo)
Video horizontal resolution Color; more than 200 lines
Signal-to-Noise ratio Video; more than 40 dB/SP
Audio; more than 60 dB/Hi-Fi
Audio frequency response 20 Hz-20 kHz/Hi-Fi
Wow and flutter 0.005%
FM TUNER SECTION
Frequency range 87.9 - 107.9 MHz (200-kHz step)
87.5 - 108.0 MHz (100-kHz step)
Sensitivity 2.5μV (IHF)
S/N 26 dB 2.2μV
Antenna terminals 75Ω(unbalanced)
Preset station 15
AM TUNER SECTION
Frequency range 520 -1710 kHz (10-kHz step)
AM Sensitivity S/N 20 dB at 1000 kHz 560μV/m
Preset station 15
GENERAL
Power supply AC 120 V, 60Hz
Power consumption
Main unit 38 W
Active subwoofer (SB-WA822) 250 W
Dimensions (W x H x D) 430 x 105 x 352 mm
(16-15/16” x 4-1/8” x 13-7/8”)
Mass 5 kg (11 lb.)
Power consumption in standby mode (when Demo function is off)
BRIGHT mode Approx. 3.5 W (main unit)+ 0.3 W (subwoofer)
DIM mode Approx. 3.2 W (main unit)+ 0.3 W (subwoofer)
OFF mode Approx. 1.9 W (main unit)+ 0.3 W (subwoofer)
SYSTEM
SC-HT822V (P) Main unit: SA-HT822V (P)
Satellie speaker: SB-HT822 (P)
Active subwoofer: SB-WA822 (P)
SPEAKER
SB-HT822V (P) Front and surround speaker:
SB-FS822 (P) x 4
Center speaker: SB-PC822 (P) x 1
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are aproximate.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
© 2004 Panasonic AVC Networks Singapore Pte. Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/PVAccel.html (3 of 4)9/3/2004 9:42:47 AM

final.html
22 Schematic Diagram
22.1 DVD Module Circuit
22.2 Main Circuit
22.3 Main Circuit
22.4 Main Circuit
22.5 Main Circuit
22.6 DSP Circuit
22.7 Power Circuit and AC
Inlet
22.8 Panel B Circuit
22.9 5DVD LED Circuit and
Panel A Circuit
22.10 CD Loading Circuit
22.11 VCR Deck Circuit
23 Printed Circuit Board
23.1 DVD Module P.C.B.
(Side A and Side B)
23.2 Main P.C.B.
23.3 DSP P.C.B.
23.4 Power P.C.B. and AC
Inlet P.C.B.
23.5 Panel B P.C.B.
23.6 5 DVD Led P.C.B. and
Panel A P.C.B.
23.7 CD Loading P.C.B. and
VCR Deck P.C.B.
24 Wiring Connection
Diagram
25 Parts Location and
Replacement Parts List
25.1 CD Loading
Mechanism
25.1.1 CD Loading
Mechanism Parts Location
25.1.2 CD Loading
Mechanism Parts List
25.2 Cassette Mechanism
25.2.1 Cassette Mechanism
Parts Location
25.2.2 Cassette Mechanism
Parts List
25.3 Cabinet
25.3.1 Cabinet Parts
Location
25.3.2 Cabinet Parts List
25.4 Electrical Parts List
25.5 Packing Materials &
Accessories Parts List
25.6 Packaging
TOP NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/PVAccel.html (4 of 4)9/3/2004 9:42:47 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
Table Of Contents
COVER
1 Powering Up of the Main Unit
1.1 Checking Player with Active Subwoofer
1.2 Using of Power Jig
2 Before Repair and Adjustment (Using Active Subwoofer Unit)
3 Protection Circuitry
4 Safety Precautions
4.1 General Guidelines
4.1.1 Leakage Current Cold Check
4.1.2 Leakage Current Hot Check (See Figure 1)
4.1.3 Caution for fuse replacement
5 Handling the Lead-free Solder
5.1 About lead free solder (PbF)
6 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices
7 Accessories
8 Precaution of Laser Diode
9 Optical Pickup Self-Diagnosis and Replacement Procedure (DVD Section)
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (1 of 8)9/3/2004 9:42:48 AM
PV
PV
PV
PV
PV
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
9.1 Self-diagnosis
9.2 Cautions to Be Taken During Replacement of Optical Pickup and Spindle Motor Assembly
9.2.1 Cautions to be taken during replacement of optical pickup
10 Self-Diagnosis Function and Service Mode
10.1 Self-Diagnosis Function (VTR Section)
10.1.1 Sef-Diagnosis Display
10.1.2 Service Mode
10.1.3 Service Mode Display
10.1.4 Self-Diagnosis History Memory Function
10.1.5 Self-Diagnosis History Memory
10.2 Self-Diagnosis Function (DVD Section)
10.2.1 Self-Diagnosis Display
10.2.2 Error Code Display
10.3 Self-Diagnosis Function and Service Mode
10.4 Mode Table
10.5 Servo Process Flowchart
10.6 Servo Process Display Mode
10.7 ADSC internal RAM display
10.8 Lock Function
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (2 of 8)9/3/2004 9:42:48 AM
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
10.8.1 Setting
10.8.2 Exiting Lock Function
10.9 Cautions To Be Taken During Servicing
10.9.1 Recovery Process after Repair of DVD Player
10.9.2 DVD Player Firmware Version Upgrade Process
10.10 Operation after Completion of Repair
10.10.1 Steps
10.10.2 Precaution Note (Important)
11 CHECKING POINTS FOR SYS COM TIMER MY-COM (IC6001) (VIDEO)
11.1 Points to check when replacing
11.2 Initial setting when replacing My-com.
11.3 Initial figure ( # ) setting procedure
12 Adjustment Procedure (DVD Section)
12.1 Required Tools and Equipment
12.2 Necessity of Adjustment
12.2.1 Necessity of Optical Adjustment
12.2.2 Necessity of Electrical Adjustment
12.3 Storing and Handling Test Discs
12.4 Optical Adjustment (Optical Pickup Tilt Adjustment)
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (3 of 8)9/3/2004 9:42:48 AM
PV
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
12.4.1 Optical Adjustment (Optical Pickup Tilt Adjustment)
12.4.2 Tips
12.4.3 Check After Adjustment
12.4.4 Procedure for Screw Lock
13 Operation Procedure
14 Disc information
15 About HighMAT
15.1 What is HighMAT?
15.2 Why use HighMAT?
15.3 The advantages of using HighMAT
15.4 Outline of the HighMAT standard
16 Assembling and Disassembling
16.1 Disassembly flow chart
16.2 P.C.B. Positions
16.3 Disassembly of Top Cabinet
16.4 Disassembly of Front Panel
16.5 Disassembly of VTR Mecha Unit
16.6 Disassembly of DVD Mecha Unit
16.7 Disassembly of DSP, Power, AC Inlet and Main P.C.B.
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (4 of 8)9/3/2004 9:42:48 AM
PV
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
16.8 Disassembly of Panel A P.C.B., Panel B P.C.B. and 5DVD Led P.C.B.
16.9 Procedure for removing CR16 mechanism (Precaution)
16.10 CR16 mechanism disassembly procedure
16.10.1 Gear for servicing information
16.10.2 Replacement of traverse deck
16.10.3 Replacement of optical pickup unit
16.10.4 Disassembly of Traverse Motor (Unit) and Spindle Motor (Unit)
16.10.5 Replacement for the disc tray
16.10.6 Replacement for the traverse deck
16.10.7 Disassembly for loading unit
16.11 CR16 MECHANISM ASSEMBLY PROCEDURE
16.12 Disassembly of traverse mechanism
16.13 Removing the Cassette Tape Manually
16.13.1 Removal by Compulsory Loading
16.13.2 Removal by Use of Battery to Rotate Loading Motor
16.13.3 Removal of Mecha Unit then take out Cassette Tape
17 Procedure for checking of the major P.C.B.
17.1 Checking the DVD Module P.C.B., DSP P.C.B., Power P.C.B., CD Loading P.C.B., Panel A P.C.
B., Panel B P.C.B. and 5DVD Led P.C.B.
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (5 of 8)9/3/2004 9:42:48 AM
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
17.2 Checking Main P.C.B. & AC Inlet P.C.B.
18 Waveform Chart
18.1 Preparation Items
18.1.1 Procedures
19 Illustration of IC ’ s, Transistors and Diodes
20 Block Diagram
20.1 DVD Module Block
20.2 Main Block
21 Notes of Schematic Diagram
22 Schematic Diagram
22.1 DVD Module Circuit
22.2 Main Circuit
22.3 Main Circuit
22.4 Main Circuit
22.5 Main Circuit
22.6 DSP Circuit
22.7 Power Circuit and AC Inlet
22.8 Panel B Circuit
22.9 5DVD LED Circuit and Panel A Circuit
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (6 of 8)9/3/2004 9:42:48 AM
PV
PV

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
22.10 CD Loading Circuit
22.11 VCR Deck Circuit
23 Printed Circuit Board
23.1 DVD Module P.C.B. (Side A and Side B)
23.2 Main P.C.B.
23.3 DSP P.C.B.
23.4 Power P.C.B. and AC Inlet P.C.B.
23.5 Panel B P.C.B.
23.6 5 DVD Led P.C.B. and Panel A P.C.B.
23.7 CD Loading P.C.B. and VCR Deck P.C.B.
24 Wiring Connection Diagram
25 Parts Location and Replacement Parts List
25.1 CD Loading Mechanism
25.1.1 CD Loading Mechanism Parts Location
25.1.2 CD Loading Mechanism Parts List
25.2 Cassette Mechanism
25.2.1 Cassette Mechanism Parts Location
25.2.2 Cassette Mechanism Parts List
25.3 Cabinet
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (7 of 8)9/3/2004 9:42:48 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html
25.3.1 Cabinet Parts Location
25.3.2 Cabinet Parts List
25.4 Electrical Parts List
25.5 Packing Materials & Accessories Parts List
25.6 Packaging
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/final.html (8 of 8)9/3/2004 9:42:48 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html
Service Manual
TOP NEXT
ORDER NO. MD0403140C1
A6
DVD/VHS Home Theater Sound System
●SA-HT822VP
Colour
(S)... Silver Type
Specifications
AMPLIFIER SECTION
RMS output power, 10% total harmonic distortion
1 kHz FL/FR 50 W per channel 6Ω
1 kHz Center 150 W per channel 6Ω
1 kHz SL/SR 50 W per channel 6Ω
100 Hz Subwoofer 200 W per channel 4Ω
Total RMS Dolby Digital mode power 550 W
FTC output power, 1% total harmonic distortion
120 Hz - 20 kHz FL/FR 28 W per channel 6Ω
120 Hz - 20 kHz Center 100 W per channel 6Ω
120 Hz - 20 kHz SL/SR 28 W per channel 6Ω
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html (1 of 4)9/3/2004 9:42:49 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html
45 Hz - 120 kHz Subwoofer 128 W per channel 4Ω
Total FTC power in Dolby Digital mode (Band 1% THD) 340 W
Input sensitivity
AUX 250 mV
Input impedance 47 kΩ
DISC SECTION
Discs played [8 cm (3”) or 12 cm (5”)]
1. DVD-RAM (DVD-VR formatted discs, JPEG formatted discs)
2. DVD-Audio
3. DVD-Video
4. DVD-R (DVD-Video formatted discs)
5. CD-Audio (CD-DA)
6. Video CD
7. SVCD (Conforming to IEC62107)
8. CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted discs)
9. MP3/WMA
❍Maximum number of tracks and groups recognizable:
999 tracks and 99 groups
❍Compatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
10. JPEG
❍Exif Ver 2.1 JPEG Baseline files
❍Maximum number of pictures and groups recognizable:
4000 pictures and 400 groups
❍Picture resolution: between 320x240 and 6144x4096 pixels
(sub sampling is 4:2:2 or 4:2:0)
11. HighMAT Level 2 (Audio and Image)
Video
Signal system NTSC
Output level Composite video; 1 Vp-p (75Ω)
S-video; 1 Vp-p (Y), 0.286 Vp-p (C) (75Ω)
Component video; 1 Vp-p (Y) (75Ω)
0.7 Vp-p (PB/CB, PR/CR) (75Ω)
Audio
Sampling frequency
CD 44.1 kHz
MP3 32 kHz, 44.1 kHz, 48 kHz
DVD-Linear 48 kHz, 96 kHz
DVD-Audio 192 kHz
Decoding 16/20/24 bit linear
Pick up
Beam Source Semiconductor Laser
Wavelength
CD/VCD 785 nm
DVD 662 nm
Number of channels 5.1 ch (FL, FR, SL, SR, C, SW)
Frequency response 20 Hz - 20 kHz (+1, -2 dB)
VHS SECTION
Video recording system 2 rotary heads, helical scanning system
Video heads 4 heads
Audio heads 2 heads
Tape speed SP; 33.35 mm/s, EP; 11.12 mm/s
Tape format VHS tape
Recording/playback time SP; 120 min. with NV-T120
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html (2 of 4)9/3/2004 9:42:49 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html
EP; 360 min. with NV-T120
FF/REW time Approx. 54 s. with NV-T120 (FF/REW)
Approx. 36 s. with NV-T120 (JET REW)
VIDEO
Television system EIA; Standard (525 lines, 60 fields), NTSC color signal
Modulation system Luminance; FM azimuth recording
Color signal; converted subcarrier phase shift recording
Input level VIDEO IN; 1 Vp-p, 75Ω
Output level VIDEO OUT; 1 Vp-p, 75Ω
Antenna receive input VHF 2-13 CH, 75Ω
UHF 14-69 CH, 75Ω
CATV 5A and A-5-EEE CH, 75Ω
AUDIO
Input level AUDIO IN (PHONO); -10 dBV, 47 kΩ
Output level AUDIO OUT (PHONO); -8 dBV, 1 kΩ
Audio track 1 track (normal-mono only),
2 channels (Hi-Fi sound stereo)
Video horizontal resolution Color; more than 200 lines
Signal-to-Noise ratio Video; more than 40 dB/SP
Audio; more than 60 dB/Hi-Fi
Audio frequency response 20 Hz-20 kHz/Hi-Fi
Wow and flutter 0.005%
FM TUNER SECTION
Frequency range 87.9 - 107.9 MHz (200-kHz step)
87.5 - 108.0 MHz (100-kHz step)
Sensitivity 2.5μV (IHF)
S/N 26 dB 2.2μV
Antenna terminals 75Ω(unbalanced)
Preset station 15
AM TUNER SECTION
Frequency range 520 -1710 kHz (10-kHz step)
AM Sensitivity S/N 20 dB at 1000 kHz 560μV/m
Preset station 15
GENERAL
Power supply AC 120 V, 60Hz
Power consumption
Main unit 38 W
Active subwoofer (SB-WA822) 250 W
Dimensions (W x H x D) 430 x 105 x 352 mm
(16-15/16” x 4-1/8” x 13-7/8”)
Mass 5 kg (11 lb.)
Power consumption in standby mode (when Demo function is off)
BRIGHT mode Approx. 3.5 W (main unit)+ 0.3 W (subwoofer)
DIM mode Approx. 3.2 W (main unit)+ 0.3 W (subwoofer)
OFF mode Approx. 1.9 W (main unit)+ 0.3 W (subwoofer)
SYSTEM
SC-HT822V (P) Main unit: SA-HT822V (P)
Satellie speaker: SB-HT822 (P)
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html (3 of 4)9/3/2004 9:42:49 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html
Active subwoofer: SB-WA822 (P)
SPEAKER
SB-HT822V (P) Front and surround speaker:
SB-FS822 (P) x 4
Center speaker: SB-PC822 (P) x 1
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are aproximate.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
© 2004 Panasonic AVC Networks Singapore Pte. Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
TOP NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0000000000.html (4 of 4)9/3/2004 9:42:49 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0100000000e.html
1 Powering Up of the Main Unit
TOP PREVIOUS NEXT
1.1 Checking Player with Active Subwoofer
1.2 Using of Power Jig
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0100000000e.html9/3/2004 9:42:49 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0101000000.html
1.1 Checking Player with Active Subwoofer
TOP PREVIOUS NEXT
1. This unit uses the active subwoofer to supply the power of the component, and the active subwoofer should be connected to the component to
check operational conditions of the component.
2. Connect both AC power supply cords to enjoy all the features of this system.
This speakers and tuner will not work unless you connect the subwoofer to a household AC outlet.
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0101000000.html (1 of 2)9/3/2004 9:42:51 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0101000000.html
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0101000000.html (2 of 2)9/3/2004 9:42:51 AM

http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0102000000.html
1.2 Using of Power Jig
TOP PREVIOUS NEXT
1. If the active subwoofer is not available during to repair of the unit, use the following equipment.
Jig product number
RFKZ0182 (110V, 127V, 220V, 230V - 240V for for overseas domestic use)
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0102000000.html9/3/2004 9:42:52 AM