Panasonic SC-BTT755 User instructions

VQC7715
F0710RE0
12 34
12
12





3

1
FRONT
Lch →

  


Easy Setting Guide
The order of setting
Blu-ray Disc Home Theater Sound System
Model No. SC-BTT755
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Easy setup
See Easy setup screen
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting
the corresponding cable.
Verify the type of speaker with the label on the rear of
the speaker.
Speakers 
Front speakers Front/Avant
Centre speaker Center/Centre
Surround speakers Surround/Ambiophonie
e.g.,
GREEN
GREY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable
by attaching the numbered
sticker at the position
indicated in the illustration. Be
sure to match the number on
each sticker with the circled
number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker
Lch
PUSH!
Front speakers Surround speakersCentre speakerSubwoofer
STEP 3
STEP 4
STEP 1 STEP 2
WHITE
White
Blue line
Tighten securely.
Leave about 80 mm Tighten securely.
Front/
surround
speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GREY
GREENPURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
Back of the base
Pull the cable straight
along the line and slide
into the groove.
VQC7715eng.indd2-3VQC7715eng.indd2-3 2010/06/2316:12:222010/06/2316:12:22

3
4
3
12 4
AC IN
AUDIO OUT
L
R
AV IN
OPTICAL
OUT
VIDEO IN
521
FRONT SURROUND CENTER
R L
SUBWOOFER
643
R L
6 Ω 6 Ω 3 Ω 3 Ω


AUX
OPTICAL
(STB/TV)
DIGITAL AUDIO IN
FM ANT
L
R
(75Ω)
AV
OUT
(ARC)
VIDEO
OUT
 
iPod EXT-IN
RADIO
R6/LR6, AA


LAN
(
10BASE-T/
100BASE-TX)
OK
RETURN
Easy setup
Would you like to start easy setup?
No
Yes
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
Main unit
Main unit’s speaker
terminals (rear panel)
PURPLE GREEN RED WHITE GREY BLUE
Connect the cables For detailed information, refer to the operating instructions.
FM indoor antenna
(supplied)
Adhesive tape
TV
Turn on the main unit
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
AC mains lead (supplied)
To a household mains socket
(AC 220 V to 240 V, 50 Hz)
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections
(Optional)
By connecting this unit to the network, you can use the
BD-Live and VIERA CAST features.
Main unit
Shielded LAN cable
(not supplied)
Modem (Broadband)
• Provided by ISP
Press [, ] to select [Yes].
*2If you want to restart the Easy setup:
Refer to “STEP 6: Easy setup” in the operating instructions.
Broadband router, etc.
Other connection
Press [ ] to turn
on the main unit.
Installing batteries in the
remote control
The Easy setup starts
The on screen display will guide you through the steps.*2
Turn on the main unit
Video cable*1(supplied)
HDMI cable (not supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Audio cable (not supplied)
Audio connection
For best quality audio,
use the HDMI cable (with
an ARC compatible
TV) or an optical digital
audio cable.
If your TV does not
support the above, use
the audio cable.
*1 Make sure that the video cable connection is
made to view photos/videos from the iPod/iPhone.
VQC7715eng.indd4-5VQC7715eng.indd4-5 2010/06/2316:12:232010/06/2316:12:23